Gps Config Menu – Kdc250G/350G - KoamTac KDC20 User Manual

KDC User
YOUR
GPS Config Menu – KDC250G/350G
Barcode and GPS data format
The GPS enabled model adds the GPS coordinate after the barcode data, if GPS data
is available. The GPS data starts with "<G|P/S]" and ends with ":". For example, the GPS
enabled model would record barcode "1234567890"
"4354.45275,N;07925.81993,W" and Altitude data "208.7,M"as
"1234567890<G|P/S]4354.45275,N;07925.81993,W ,208.7,M:" in the barcode data field.
GPS Menu

GPS Power: Turning GPS Power on or off
 Users may enable or disable the GPS Power.
 The GPS module consumes extensive battery power. To conserve battery
power, it is strongly recommended to turn off the GPS option when the GPS
enabled model is not being used for an extended period of time.
 It is also recommended to use the GPS Auto Power Off option in the
SystemConfig menu. This option automatically turns off the GPS power if a
barcode is not scanned for a period of time.

Power Mode: The user may choose the type power consumption for the GPS
function.
 Users may extend the battery life of the GPS enabled model in Power Save
mode.
 Users should use normal mode if accurate GPS data is required.
 The KDC350G will last about 15 hours in normal non-bypass data mode
and 18 hours in power save non-bypass data mode.
 The KDC350G will last about 7 hours in normal bypass data mode and 8
hours in power save bypass data mode.

Bypass Data: Enabled or Disabled
 This option should be disabled if users wish to record the GPS data with a
scanned barcode data.
KDC
, GPS coordinate
89