Cdma Config Menu (Kdc350Wa Cdma) - KoamTac KDC20 User Manual

KDC User
YOUR

Enable/Disable KDC to reconnect to AP & Server when it detects disconnection
from AP and Server.
Send Stored

Enable/Disable KDC to send stored data when sending a new read data.

CDMA Config Menu (KDC350WA CDMA)

KDC350WA CDMA model can send and receive data to/from host by using the
following protocols if and only if the device is activated and the Verizon network is
available.

UDP

TCP

HTTP_GET

HTTP_POST
In UDP/TCP mode, KDC350WA will support full duplex mode, meaning is the
KDC350WA will be ready to get data from host all the time.
Power

Turns the CDMA Module Power ON and OFF.
Provisioning

Activates the device under Verizon CDMA network.
Server

Configure the following server information

IP Address

URL Address

Port Number

Protocol (UDP/TCP/HTTP-GET/HTTP-POST)

SSL(Security)

Server Page

Resp. Timeout
Connect

Connect to Server.
KDC
94