Wifi Config Menu (Kdc350F) - KoamTac KDC20 User Manual

KDC User
YOUR
Smart Hopping
It enables KDC450U to find an optimized UHF channel and can be initiated by reading
a special barcode.

WIFI Config Menu (KDC350F)

KDC350F WiFi model can send and receive data to/from host by using the following
protocols.

UDP

TCP

HTTP_GET

HTTP_POST
In UDP/TCP mode, KDC350F will support full duplex mode, meaning is the KDC350F
will be ready to get data from host all the time.
Power

Turns the Wi-Fi Module Power ON and OFF.
AP

Set AP SSID.

Set AP Passcode.
Server

Configure the following server information

IP Address

URL Address

Port Number

Protocol (UDP/TCP/HTTP-GET/HTTP-POST)

SSL(Security)

Server Page
Connect

Connect to AP and server.
Auto Connect
KDC
93