Auto Pairing - KoamTac KDC20 User Manual

KDC User Manual
 Users have to RESET the iPhone/iPad/iPod touch in order to change HID
to MFi mode, and vice versa, after removing a previous KDC connection.
 KDC with Bluetooth Spec2.1+EDR does not prompt Pin code entry menu.
 KDC with Bluetooth Spec. 2.1+EDR stack does not require 4 or 6 digits PIN
digits entry
Follow the below steps in order to pair and connect KDC models for MFi and iOS4.0+ in
HID mode.
1.
Go to the MFi menu of KDC SystemConfig Menu
2.
Change MFi option to Disabled
3.
Change ConnectDevice to HID iOS mode
4.
Remove previous KDC connection and RESET the device
5.
Change KDC to Pairing mode
6.
The iPhone/iPad/iPod touch will find a new device as
7.
Keyboard
Click
iOS Soft Keyboard Toggling using BT Toggle Option.
Users need to select the option to use this feature in BT Config>BT Toggle. Press the DOWN
button to toggle a soft keyboard.

Auto Pairing

For SPP and MFi mode, user used to select host profile before pairing. However, user
doesn't need to select host device profile if this option is enabled. KDC automatically
detects if host device is a SPP or MFi mode. This option is supported from KDC
Bluetooth firmware version 2.2.O.
device
B
LUETOOTH
Keyboard
118