Figure 40 - Db Lookup Application Menu - KoamTac KDC20 User Manual


Download DB to KDC - Downloads user created database to KDC.

Starting Quantity - Enter predefined start quantity for each scanned barcode.
The start quantity may be defined from 1 to 128 and may be adjusted using UP
or DOWN buttons.

Barcode Field - Select the position of barcode field in database from 1 to 4.

Stored Barcode Start Position - Select the numeric position of start substring
character of barcode in database from 1 to 39.

Scanned Barcode Start Position - Select the numeric position of start
substring character of scanned barcode from 1 to 39.

Comparing Barcode Length - Number of characters to be compared from 0 to
255 where 0 is all characters.

Display on KDC - Define database fields to be displayed on KDC. KDC may
display one to three fields. KDC will display one field in two or three lines, if
same field is specified in line entering option.

Figure 40 - DB Lookup Application Menu

162