KDC Package ................... 18 KDC Characteristics ................... 20 Keypad (KDC350) ....................23 Input data by using a keypad (KDC350) .............. 24 Turn on the power of KDC20/30/400 ..............25 2. INSTALLATION ..............26 Bluetooth Pairing ....................26 Preparing for Pairing ...................... 26 Pairing ..........................
Page 3
KDC20/30/400 ....................... 73 Empty Battery ....................74 KDC100/200/250/300/350 .................... 74 KDC20/30/400 ....................... 74 Buffer Full ......................74 Reset Feature (100/200/250/300/350) or Power-on/off (KDC20/30) ....75 Replace Battery ....................76 4. BLUETOOTH KDC20/30/200/250/300/350/400 ....77 Bluetooth Config ....................77 ConnectDevice ....................... 77 Auto Connect .........................
Page 4
Barcode & KDC Settings ..................95 Select Symbologies and Symbology Options ............... 96 Data Editing Option ....................... 96 Other Settings ....................97 KDC Menu in KTSync (KDC20/30/400) ............... 98 Mobile pKTSync ....................99 Android aKTSync ..................... 100 KDC and Android Pairing .................... 100 Revision 3.06.A3...
Page 5
8. WARRANTY ................ 127 9. CONTACT INFORMATION ..........128 10. APPENDIX A BARCODE & SCAN OPTIONS ....... 129 10.1 Symbologies ....................129 Bookland EAN vs. EAN-13................... 130 Add-on Symbologies ....................130 10.2 Code Options (KDC20/30/100/200/250/410/415) ..........131 Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 6
Host Interface ....................138 11.3 Battery ......................138 11.4 Memory ......................139 11.5 Programming ....................139 12. APPENDIX C 1D SPECIAL BARCODES (KDC20/100/200/250/350L/410/415) ........140 12.1 Set Symbologies ....................140 12.2 Barcode Options ....................143 12.3 Delete Last Scanned Barcode ................146 12.4 Scan Options ....................
Page 7
12.28 Symbol Character ..................180 12.29 GPS (GPS Model Only) ................. 183 12.30 GPS/BT Auto Power Off Timeou ..............184 12.31 NFC (NFC Model Only) ................185 12.32 USB Disk (M Model Only) ................186 Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 8
13.17 HID Initial Delay ................... 206 13.18 HID Character Delay ..................207 13.19 HID Control Character .................. 208 13.20 System ......................209 13.21 Sleep Timeout ....................212 13.22 Function ....................... 213 13.23 Number ....................... 214 Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 9
Figure 4 - KDC200/250/300/350 Overview ................22 Figure 5 - KDC400 Overview ....................22 Figure 6 - How to turn on the power in KDC20/30/400 ............25 Figure 7 - Selecting a Bluetooth device type from the KDC menu ........27 Figure 8 - Selecting Pairing mode in KDC ................
Page 11
KDC User Manual NTRODUCTION Figure 44 - Inventory Application ..................124 Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 12
Table 11 - Verification of Optional "Check Digit" .............. 132 Table 12 - Transmission of "Check Digit" ................133 Table 13 - Resolution of Inconsistencies ................134 Table 14 - Symbologies supported by KDC ................ 137 Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 13
No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from KOAMTAC, Inc. The material in this manual is subject to change without notice. KOAMTAC reserves the right to make changes to any product to improve reliability, function, or design.
Products intended for sale within the European Union are marked with a CE Mark which indicates compliance to applicable Directives and European Normes (EN), as follows. Amendments to these Directives or ENs are included: Normes (EN), as follows: Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
003WWA080049, 003WWA090274, 208-120048, 208WW110041, 208-130029, 208-140011, 208-140049 Article 2-1-19, 2.4GHz Wide Band low power data communication system Japan 2014026493, 2014027753 Korea MSIP-CMM-A13-KDC20, MSIP-CMM-A13-KDC30, AI3-KDC100, AI3-KDC200, MSIP-CMM-A13-KDC250, MSIP-CMM-A13-KDC350, MSIP-CMM-A13-KDC350, MSIP-CMM-A13-KDC400, MSIP-CMM-A13-KDC450 Laser Compliance KDC20/100/200/250/350L/410/415/430 Complies with US 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice no.
Page 16
This device should not be placed in municipal waste. Please check local regulations for disposal of electronic products. Bluetooth Core Specification: 2.1+EDR Apple Made for iPhone, Made for iPod, Made for iPad Samsung Compatible with Galaxy Series Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Lightweight and compact, with a user-friendly design and superior functionality, KOAMTAC’s KDC works in a variety of portable applications. Use it independently or as an accessory to a PC, PDA, or smartphone. To find out more about KOAMTAC, Inc. and our family of products, visit us at www.KOAMTAC.com.
SCAN, UP, and DOWN buttons, OLED display, LEDs, and ports on the KDC. Although KDC models consist of similar buttons and LEDs, each model has different characteristics for its own purpose of use. The KDC20/30/100 include a swing-out USB connector and the KDC350 has a keypad.
KDC200/250/300/350 Barcode Reader and Data Collector Green/Red/Orange LEDs OLED Display UP Button SCAN Button DOWN Button Ultra mini USB Port KDC200 Green/Red/Orange LEDs UP Button OLED Display DOWN Button SCAN Button Ultra mini USB Port KDC250/300 Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Function Button Menu Button DOWN Button UP Button SCAN Button Shift Button Mode Button Keypad Ultra mini USB Port KDC350 Figure 4 - KDC200/250/300/350 Overview KDC400/450 Barcode Reader and Data Collector Figure 5 - KDC400 Overview Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
FN + 3 NFC Power On/Off (KDC350 N series only) (Function button) FN + 4 Enter Bluetooth Pairing Mode FN + 5 Bluetooth Power On/Off FN + 6 Change Bluetooth profile FN + 0 Factory Default Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Menu select Yes to cancel input. 123K 123Koamtac Press Shift on the Press the keys for keypad to change to remaining letters. lower case mode. Save 123Koamtac SCAN Press button to save barcode data. SCAN Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
KDC User Manual NTRODUCTION 1.5 Turn on the power of KDC20/30/400 KDC20/30/400 have power on/off switch. Please turn on the power first before using the device. Press SCAN and DOWN SCAN Button buttons simultaneously for 5 seconds. The user will hear a beep sound when it is turned on.
Select a Bluetooth profile. There are two ways to set up a Bluetooth profile. Select and scan the needed Bluetooth profile barcode from the following barcodes. KDC 20/100/200/250/350L/410/415 (1D) Bluetooth Profile SPP Bluetooth Profile HID iOS Bluetooth Profile MFi Bluetooth Profile SPP2.0 Bluetooth Profile HID normal Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Or, for KDCs equipped with an LCD screen (KDC100/200/250/300/350), the user can select a Bluetooth device type from the ConnectDevice menu as shown below. KDC Menu BT Config Connect Device Save & Exit Figure 7 - Selecting a Bluetooth device type from the KDC menu Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Select Pairing Figure 8 - Selecting Pairing mode in KDC For the KDC20/30, press the Scan button for three seconds in order to enter into Pairing mode. For the KDC 400, press the Up button immediately after turning the power on in order to enter into Pairing mode.
Tap Bluetooth After it has been installed, open KTSync and it will automatically find and connect to the KDC. (Refer to 2.2 KOAMTAC Installation Wizard for more information about installing KTSync) Option Two: Connect the host device from the KDC by scanning a Special...
KDC420 series models can read barcodes that have been printed QR barcodes that are on a LCD screen. Laser scanners such as the KDC20, KDC100, KDC200, KDC350L, and KDC410 series models are not designed to read barcodes from a LCD screen and will only read printed barcodes.
Click Start icon then My Computer icon. A list of devices on the computer will be displayed, including the disk drive containing the KOAMTAC Installation Click on the KOAMTAC Installation CD icon, then the Setup directory. Click on the PC_Setup.exe file, which will execute the KTSync Setup Wizard.
Page 32
In the License Agreement window, select “I Agree” and click Next. In the KTSync Installation Complete window, click Close and wait for the Device Driver Installation Wizard. In the Windows Security window, click Install to complete installation. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Download and install aKTSync from the Android Play Store. https://play.google.com/store/apps/details?id=com.koamtac.ktsync&hl Blackberry Download and install bKTSync from the Blackberry App World. http://appworld.blackberry.com/webstore/content/16861?lang=en iPad/iPhone/iPod touch Download and install iKTSync from the Apple App Store. http://itunes.apple.com/us/app/ktsync/id372916602?mt=8 Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
2.3 Manual Installation Windows 7/8 Insert the KOAMTAC Installation CD into the computer’s disk drive. Create a directory named KOAMTAC on the computer. Copy XP.Vista.7 directory from the KOAMTAC CD to the KoamTac directory. XP.Vista.7 directory contains KTSync ® programs for Microsoft ®...
KDC to malfunction or become damaged. To attach the Lanyard: KDC20/30 KDC100/200/300/350/400 Fit the thin end of the Lanyard through the pillar of the KDC. Guide the thick end of strap through the thin loop. Pull strap tight to secure. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Press the Up and DOWN Buttons simultaneously to access the KDC menu. Select one of the Move the menu bar up and menus by pressing down by pressing Up and the Scan Button. Down Buttons. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Move the menu bar up and down by pressing the Buttons, and configure the KDC by pressing the SCAN Button to select a menu. Figure 13 - Location and use of buttons on a keypad (KDC350) CONFIGURATION METHODS FOR THE KDC20/30/400 KTSync ® Software ...
The scanned barcode data will be displayed on the KDC screen, along Depending on the configuration of the KDC, other with the scan time and battery level. information may also be displayed. Figure 14 - KDC Display Figure 15 - Scanning barcodes using KTSync Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
After finishing the configuration, scan a barcode as explained in 3.2.1 Reading Barcodes. When the user has successfully scanned a barocde, the barcode data and GPS coordinate will appear on the KDC screen. For more information, refer to 3.3 Menu - GPS Config (350G). Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Num mode and Abc mode by using the Mode button. To switch between uppercase and lowercase letters, the user can press the Shift button while in Abc mode. To save the data input, press the Enter or SCAN button. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 45
Record Format Data,DataTime, Data Data Data Data Data Data Data DataType,DataTime Type HID Options/ US,German,French HID Keyboard ,Italian,Spanish HID Options/ Disabled, Disabled Disabled Disabled Disabled Disabled Disabled Disabled HID Ctrl Char Alt+Numpad, ^+Character, Replace to | Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 46
MSR Config Data Format MSR Data Only Packet Data Use Track1 Use Track2 Use Track3 Beep on error Enabled/Disabled reading Encrypt MSR Enabled/Disabled Data AES Key 128bit/192bit/256bit Length Card Type ISO/OTHER 1/AAMVA Track None/Space/Comma/ Separator Semicolon/CR/LF/CR& Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 47
KDC User Manual PERATING YOUR LF/Tab Attach Start/End Sentinel Partial Data Start Position Partial Data Length Partial Data Erase/Select Action Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
View Data Menu This menu option allows you to view and/or delete barcodes stored in the KDC. In the case of the KDC20/30, you can delete the last scanned barcode by pressing the DELETE button on the right side of the unit.
Page 55
(KDC20/100/200/250/350L/410/415) or 2 characters to 48 characters (KDC30/300/350C/420/450). It is strongly recommended that you maximize the minimum barcode length setting to prevent possible errors. The default minimum barcode length of KDC20/100/200/250/350L/410/415 is 4 characters. The default minimum barcode length of KDC30/300/350C/420/450 is as follows:...
Postal Codes Kix Post Australia Post Japan Post China Post 2(4) 80(80) Korea Post 2(4) 80(48) OCR Off OCR A OCR B OCR USC OCR MICR OCR SEMI Table 4 - KDC30/300/350C/420/450 Minimum Barcode Length Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Wedge & Store Only: Barcode data is stored in memory and transmitted to the host. Store Only: Barcode data is stored in memory but NOT transmitted to the host. Save if Sent: If data transmission is successful, barcode data is stored in memory. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 58
This Prefix option is different from the Prefix option in KTSync, which attaches Note the prefix to data during synchronization. The user can also define the prefix by scanning characters defined in Appendix Note C. between the following special barcodes. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 59
KDC 20/100/200/250/300/350L/410/415 Prefix Enter Start Prefix/Suffix Enter Finish KDC30/350C/420/425 Prefix Enter Start Prefix/Suffix Enter Finish Users can also delete or display current prefixes by scanning the following special Note barcodes. KDC20/100/200/250/300/350L/410/415 Delete Prefix Display Prefix Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 60
The user can also define a suffix by scanning characters defined in Appendix C.27 ~ C.28 (KDC350L) and Appendix D.27 ~ D.28 (KDC350C) by scanning the Note following special barcodes: KDC20/100/200/250/300/350L/410/415 Suffix Enter Start Prefix/Suffix Enter Finish Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 61
PERATING YOUR KDC30/350C/420/425 Suffix Enter Start Prefix/Suffix Enter Finish The user can also delete or display a current suffix by scanning the following Note special barcodes. KDC20/100/200/250/300/350L/410/415 Delete Suffix Display Suffix KDC30/350C/420/425 Delete Suffix Display Suffix Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 62
The cursor moves to next line after the current data input is complete, regardless of whether there is an data input or not. The screen is scrolled up one line if the ‘#’ key is pressed on the last line of KDC screen. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
WXYZ WXYZ; JKL{}| .,?! .,?!`~ BT Config Menu – KDC20/30/200/250/300/400 Bluetooth The KDC supports Ver2.1+EDR. Before utilizing the advantages of Bluetooth functionality with the KDC, the user should become familiar with Bluetooth connectivity and its impact on the host environment.
Page 64
KDC User Manual PERATING YOUR HID iOS - KDC20(i)/30(i)/200Ii)/250(i)/300(i)/350(i)/400(i)/450(i) SPP2.0 - KDC20(i)/30(i)/200Ii)/250(i)/300(i)/350(i)/400(i)/450(i) SPP - KDC20(i)/30(i)/200Ii)/250(i)/300(i)/350(i)/400(i)/450(i) MFi (KDC20i/30i/200i/250i/300i/350i/400i/450i) Auto Connect Enabled or Disabled Auto Reconnect Enabled or Disabled (MFi, HID iOS, HID normal mode) Auto Power On...
HID mode HID Control Character This option helps users to map control characters to either ALT+Numlock or ^+Character. BT Service – KDC20/30/200/250/300/350/400 Power Users can choose to turn Bluetooth Power on or off. Select between Enable and Disable. Pairing Mode This option allows user to enter pairing mode by simply selecting this menu.
The KDC350 will bypass GPS data to the host if the bypass option is enabled. The KDC350 becomes a Bluetooth GPS receiver if this bypass data option is selected. Acquire Test: Time test to see how long it takes to acquire GPS signal. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
This option is available in USB Disk mode and allows users to format KDC USB Disk. Record Format This option selects the record format of the data that will be stored in the disk file. Data Data Time Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 68
Data Time Type USB HID - KDC20/30/100M/200M/250M/300M/350 KDC20/30/100M/200M/250M/300M/350 may be used as a USB Keyboard. USB HID When this option is enabled, KDC will be in USB HID mode. Record Format This option selects the record format of the data that will be stored in the disk file.
Memory Status In this option, users can checks the number of stored barcodes and memory usage. Reset Memory In this option, users can reset KDC memory by erasing all stored barcodes, applications, and BT registry. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 70
MFi Mode (KDC20i, 30i, 200i, 250i, 300i, 350i, 400i) This option allows user to enable or disable MFi mode. MFi mode supports SPP and MFi Bluetooth profiles. Non-MFi mode supports SPP, SPP2.0, HID iOS and HID normal. Vibrator Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
KDC connection. KDC with Bluetooth Spec2.1+EDR does not prompt Pin code entry menu. KDC with Bluetooth Spec. 2.1+EDR stack does not require 4 or 6 digits PIN digits entry Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Click device. iOS Soft Keyboard toggling using BT Toggle option Users need to select the option to use this feature in BT Config > BT Toggle. Press the DOWN button to toggle a soft keyboard. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Low battery Orange USB is connected and battery is charging HID mode is in pairing mode. No reading SPP mode is in pairing mode. Table 5 - Explanation of LEDs Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
2MB Partition - Collected data size reaches 2MB or collected number is 102,400 3MB Partition - Collected data size reaches 3MB or collected number is 153,600 4MB Partition - Collected data size reaches 4MB or collected number is 204,800 Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
KDC settings during the reset process. However, if you are using the KDC20/30, you can turn the power on and off by pressing the DOWN and SCAN button simultaneously for 5 seconds. When the LED light is green, you can release the buttons and the power will be on.
(KDC300/350/400) battery. The battery can be recharged from any USB port or KDC charging cradle, and can be recharged about 300 times before it needs to be replaced. KOAMTAC recommends replacing the battery annually, as a declining battery will cause noticeable performance degradation in the KDC.
Bluetooth The KDC200/250/300/350’s options can be configured by using the KDC menu and special barcodes. The KDC20/30/400’s Bluetooth options can be configured by using the PC KTSync and special barcodes. 4.1 Bluetooth Config ConnectDevice The KDC supports both Serial Port Profile (SPP) and Human Interface Device Profile (HID).
The PWR On Time option works in conjunction with the Auto Power On option. The default value is Disabled. If the KDC Bluetooth power is off, you can turn on the Bluetooth power by pressing the SCAN button for the PWR On Time option value. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
3. Five short beeps if: “Beep Warning is ENABLED” “Auto Power Off is DISABLED” “KDC20/30/200/250/300/400 is DISCONNECTED from HOST” “Bluetooth power is ON” PWR OFF Time The PWR Off Time option works in conjunction with the Auto Power Off option. If Auto Power Off is Enabled, the KDC powers off Bluetooth when the duration of time specified in the PWR Off Time option is met and the KDC is NOT CONNECTED to the host.
100msec in HID mode. Control character transmission in HID mode Control characters between ASCII values 0x00 and 0x1F can be replaced by the ALT+Numpad or ^+Character. Disabled Transmit the original control character. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
3sec pressing less than 3sec, Releases BT connection MFi(iPhone) Reconnect Does nothing Releases BT connection SPP 2.0 Does Does nothing Releases BT connection nothing HID normal Reconnect Does nothing Releases BT connection Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
If the message “Connected” displays, a Bluetooth connection is established. It is possible for the message “Pairing failed...” to display on the KDC while the host device displays the “Connected” message. If this occurs, a Bluetooth connection has been established. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
KDC User Manual LUETOOTH Discovering Bluetooth KDC20/30/200/250/300/350/400 starts to search for neighboring devices if the Discovering menu is executed. It will take about 30 seconds to finish searching and to list Bluetooth available neighboring devices. Another option is to enter the corresponding...
PC during the initial installation process. Before data can ® be uploaded to any host device, KTSync must be launched on the host and configured to recognize the KDC. The following screen displays when KTSync ® is launched: KDC100/200/250/300/350 Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Note Bluetooth: This option is not available on KDC100. Users can register a MAC address to be directly connected by KDC20/30/200/250/300/350/400. Configuration: This option allows users to set different KDCs with same settings by exporting and importing settings from one KDC to the other.
Pick/BIN: The user defines Pick ID and the barcode symbology for comparison with a defined Bin. Inventory: Users can count inventories. Inventory description will be displayed if inventory DB is downloaded into the KDC. Figure 22 - Application Menu Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
4. Check to make sure that the KDC is not in KDC Mode Menu. 5. Restart KTSync ® ® You can manually assign the COM port using KTSync Connect option Note under the File menu. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Located under the File Menu, this option allows the user to manually synchronize data on KDC with the host. This option is similar to clicking on the Synchronize button in the KoamTac Data Synchronizer box. Bluetooth This menu option allows the user to register up to ten Bluetooth devices, including their MAC address, PIN #, and optional prefixes or suffixes.
Second, connect a different KDC to your computer and import the settings file to the KDC by selecting Import in the Configuration menu. Once configuration has been finished, KDC will restart. Export Import Figure 26 – Configuration Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 90
KDC User Manual YNCHRONIZATION Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Microsoft Excel - This option means barcode data is being imported directly into Microsoft’s Excel. Various parameters can be set when uploading data to Excel. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Clear KDC Memory after Synchronization If this option is selected, the stored barcode data is cleared from the KDC memory after synchronization. The KDC20/30/100/200/250 can store a total of 10,240 barcodes or 60KB (86 version)/160KB (85 version) of barcode data.
The user can set transmission delays between barcodes and characters during the synchronization process. It is important to set proper delays to prevent errors during the transmission of collected barcodes. Some Windows applications, such as Excel, require longer delay times. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Enabled, non-complete records, i.e. three steps were defined but data was only collected for two steps, will be discarded. Attach Quantity If this option is Enabled, quantity will be attached to the left or right of the data. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
A – Barcode & Scan Options for proper barcode settings for the application. The user must configure barcode and scan options properly for optimal KDC Note performance. Figure 28 - Barcode & KDC Settings, Symbologies, Data Editing and Scan Options Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Erase the characters from position Set Partial Data Start Position to , Partial Data Length to Partial Data Action to Erase. Partial Data Length erases all characters from position. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
To select any of these settings, click on the box to the left of the setting. A check mark () will display next to the setting to indicate that it is selected. Figure 29 - KTSync Confirmation Settings ® Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
After connecting KDC 20/30/400 to PC with a USB cable, run KTSync on your PC and you will see KDC Menu on the right side of KTSync window. Click KDC Menu, and you can configure your KDC20/30/400 in KDC Menu window, as shown below. Figure 30 - KDC Menu in KTSync (KDC20/30/400) Revision 3.06.A3...
WARNING: The user must assign the correct COM port to KDC before using pKTSync. Please refer to the mobile device manual for details on Bluetooth pairing and COM port assignment methods. Figure 31 - Mobile pKTSync Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
D. Click on Bluetooth Settings. E. Click on Scan devices. F. The Android device will display the KDC model and 6 digits of the serial number. Press the KDC list entry, enter “0000” PIN code, and press OK. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
, and then “ connected” D. On the KDC display, you will see “Pairing Succeeded!!!” and then “Bluetooth Connected”. E. Select Settings option on the bottom left to change aKTSync setting. Figure 32 - Android aKTSync Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Launch Settings on the Android device. Select Language and Keyboard (or Input method). Select KTSync Keyboard. Launch the application and touch the input box to focus. The barcode will be wedged to the input box upon scanning a barcode. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
The message “Connecting to iPhone/iPod touch device name” will be displayed. d. iPhone/iPad/iPod touch will ask for the PIN number. f. Please enter “0000” and hit “connect” icon. g.“iPhone/iPad Connected” message will be displayed. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
How to connect and reconnect MFi(iPhone) mode using UP keys The user needs to select the option to use this feature in the BT Config > BT Toggle. Press the UP button to connect or reconnect to the iPhone/iPad/iPod touch. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
To scan barcodes into any application (like email, notes, worksheet or web browser), press the menu key and select Running in the background option. bKTSync will maintain the connection and place the scanned barcode data wherever the cursor is flashing. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Automatic connection and disconnection on USB port. The user will see the following initial KTSync screen upon launching the program. KTSync will connect automatically if KDC is plugged in a USB port or if KDC is paired. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Active window, and User application. Clear Button The user may press this button to clear the KTSync internal viewer. Settings Button The user can configure synchronization options on the following screen by pressing the Settings button. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 109
KTSync clears barcode data stored in the KDC’s memory once synchronization has finished, if this option is enabled. Append data to file KTSync appends synchronized data to existing file specified on destination. If file does not exist then KTSync creates a new file. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 110
The user can select one of None, CR, LF, TAB, and CR&LF as the record delimiter. The CR&LF is selected as the record delimiter by default. Other Options Non-English keyboard This option is used when the barcode data has non-English characters and a non-English keyboard. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Figure 36 - Application Warning Window KDC will wedge barcode data to the host in application mode if “wedge and store always” option in data process menu is selected and KDC firmware Note version is higher than 2.86.xxx.G. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
First line Enter up to 13 characters; these will display on the first line of the KDC. Second line Enter up to 13 characters; these will display on the second line of the KDC. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
When the user select Enable data filtering, the user must click on the Settings button to select the Data filter setting. The options for the Data filter settings are the same for Step1, Step 2, and Step 3. Figure 38 - Data Filter Settings Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 114
This option allows the user to define partial barcode data to be collected when a barcode is scanned. Only the partial data will be stored in the KDC. Start position – This is the starting position that the KDC will use when collecting scanned barcode data. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 115
To include a third step, click the box, Generate step 3. This step has the same options as step 1 and 2. In this step, the user has the option to repeat steps 2 or 3. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
KDC will run in normal mode if you do not change to Application mode after downloading the application. If you want to delete the downloaded application in your KDC, select App. Data in Reset Memory after you go to System Config in KDC Menu. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Slave start position - Select the numeric position of start substring character in Pick barcode, 1 to 255. Comparing Barcode Length - Number of characters to be compared, 0 to 255. 0 means all characters. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Select the numeric position of start substring character in Bin barcode from 1 to 255 and the barcode symbology. Comparing Barcode Length Select the number of characters to be compared from 0 to 255. 0 means all characters. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Bin data Ignore Scanned Pick Label Timeout User Input Ignore Scanned Side Key Pick Label Scan button Store User ID, Barcode KDC Serial Number, Match? Timestamp, Pick Barcode Figure 42 - Pick/BIN Application Flow Chart Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Stored Barcode Start Position - Select the numeric position of start substring character of barcode in database from 1 to 39. Scanned Barcode Start Position - Select the numeric position of start substring character of scanned barcode from 1 to 39. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Display on KDC - Define database fields to be displayed on KDC. KDC can display one to three fields. KDC will display one field in two or three lines, if same field is specified in line entering option. Figure 43 - DB Lookup Application Menu Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Click Do not add non-existing item into DB if one do not wish to add new items into inventory DB. The number of Barcode Data Field is between 1 to 4. The position of Display Filed is between 1 to 4. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 124
KDC User Manual PPLICATION ENERATION Figure 44 - Inventory Application Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
KDC User Manual ROUBLESHOOTING WSED.exe, with the same icon as in the taskbar Delete the registry entry KEY_LOCAL_MACHINE \SOFTWARE\Microsoft\Windows\Current Version\Run\WSED Table 6 - Troubleshooting Techniques Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Under no circumstance will KOAMTAC be liable for any direct, indirect, consequential or incidental damages arising out of use or inability to use either the hardware or software, even if KOAMTAC has been informed about the possibility of such damages.
KDC User Manual ONTACT NFORMATION 9. Contact Information CORPORATE HEADQUARTERS 116 Village Blvd., Suite 305 Princeton, NJ 08540, USA Phone: 609-256-4700, FAX: 609-228-4373 Email: support@koamtac.com For more information, visit our website - www.KOAMTAC.com Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
10.1 Symbologies KOAMTAC’s KDC products support most major barcode symbologies including 1D, 2D, Postal, and OCR-Fonts. Below is the list of the barcode symbologies supported by the KDC with respect to each model’s particular area of support. To ensure superior scan performance, remember to select only the required symbologies.
With add-on Only EAN-13 barcodes with 2 or 5 add- false true on symbols are decoded. Without add-on The add-on symbol is ignored. true false Table 8 - Add-on for EAN-13 Symbology Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Since the decoder takes a conservative view on the add-on symbols, it is likely that the add-on symbol will be missed in the auto-discrimination mode. Auto- discrimination mode should then be avoided. 10.2 Code Options (KDC20/30/100/200/250/410/415) The KDC supports the following barcode options: Transmission of start and stop characters ...
If the check digit verification fails, the barcode is not transmitted. Option Selected Verify Code39 check digit Verify I2of5 check digit VerifyCheckDigit Code39_VerifyCheckDigit No effect I2of5_VerifyCheckDigit No effect Table 11 - Verification of Optional "Check Digit" Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
EAN-13 and EAN-13 options (if specified) will be applied. For the two symbologies that have optional check digits, Code39 and Interleave 2 of 5, the decoder will always transmit the check digit if the verification is disabled. Verify Check Return Check Description Digit Digit Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Enabled or Check digit is not verified but is transmitted Disabled Enabled Disabled Check digit is verified but is not transmitted Enabled Enabled Check digit is verified and is transmitted Table 13 - Resolution of Inconsistencies Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
The check digit is the digit that needs to be added to the sum to make it an even multiple of 10. An example would be if the sum of the products was 37, then the check digit would be 3. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
204,800 barcodes. Data Buffer Full When the data buffer is full, the KDC displays a message, Buffer Full, ignoring any command to scan barcodes. The user must reset the data buffer to continue data collection. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
KDC User Manual 11. Appendix B –FAQ 11.1 Symbology Q: What barcode symbologies are supported by the KDC? A: The KDC20/100/200/250/350L/410/415 support 1D barcode only. KDC30/300/350C/420/425/450 support most major 1D, 2D barcode symbologies and OCR. KDC30/300/420/425 KDC20/100/200/250/410/415 2D Barcodes 1D Barcodes...
Q: How long will the KDC battery lasts in the sleep mode? A: KDC100 lasts more than 75 days. KDC20/200 lasts more than 2 days while connected in Bluetooth and 60 days if not connected in Bluetooth. KDC250 lasts 7 days while connected in Bluetooth and 120 days if not connected in Bluetooth.
Q: How many barcodes can be stored in the KDC? A: KDC100M/200M/250M/300M/350 have 4MB data memory which can store maximum of 204,800 barcodes. KDC20/30 have 160KB data memory which can store maximum 10,240 barcodes. KDC400 has 100KB data memory. Q: Can I download stored barcodes or wedge barcodes to my application? A: Yes.
ARCODES Appendix C – 1D Special Barcodes (KDC20/100/200/250/350L/410/415) 12.1 Set Symbologies Enable EAN13 Disable EAN13 Enable EAN8 Disable EAN8 Enable UPCA Disable UPCA Enable UPCE Disable UPCE Enable Code39 Disable Code39 Enable ITF14 Disable ITF14 Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 141
Enable I2 of 5 Disable I2 of 5 Enable Codabar Disable Codabar Enable GS1-128 Disable GS1-128 Enable Code93 Disable Code93 Enable Code35 Disable Code35 Enable Bookland EAN Disable Bookland EAN Enable EAN13 with Addon Disable EAN13 with Addon Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 142
KDC User Manual 1D S PECIAL ARCODES Enable EAN8 with Addon Disable EAN8 with Addon Enable UPCA with Addon Disable UPCA with Addon Enable UPCE with Addon Disable UPCE with Addon Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Convert UPCE to EAN13 Do NOT convert UPCE to EAN13 Return Check Digit Do NOT Return Check Digit Verify Check Digit Do NOT Verify Check Digit Convert UPCA to EAN13 Do NOT Convert UPCA to EAN13 Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 144
Return check digit for UPCE Do NOT return check digit for UPCE Return check digit for UPCA Do NOT return check digit for UPCA Return check digit for EAN8 Do NOT return check digit for EAN8 Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 145
KDC User Manual 1D S PECIAL ARCODES Return check digit for EAN13 Do NOT return check digit for EAN13 Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Narrow Scan Angle Normal Filter Mode High Filter Mode Enable Auto Trigger Disable Auto Trigger Reread Delay = Continuous Reread Delay = Short Reread Delay = Medium Reread Delay = Long Reread Delay = Extra Long Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
12.8 Data Process - Wedge/Store & Enter Key Wedge Only Wedge & Store Always Store Only Save if Sent Save if Not Sent Enable Enter Key (KDC350L Only) Disable Enter Key (KDC350L Only) Enable Extend Key(KDC350L Only) Disable Extend Key(KDC350L Only) Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
12.9 Data Process - Data Edit Start Prefix Enter Start Suffix Enter Finish Prefix/Suffix Enter Cancel Prefix/Suffix Enter Delete Prefix Delete Suffix Display Prefix Display Suffix AIM ID None AIM ID In Prefix AIM ID In Suffix Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
KDC User Manual 1D S PECIAL ARCODES 12.10 Data Process - Data Format & Handshake Data format = Barcode only Data format = Packet data Enable Handshake Disable Handshake Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
12.11 Data Process - Termination Character & Duplicate Check Termination Character = None Termination Character = CR Termination Character = LF Termination Character = CR+LF Termination Character = Tab Enable Duplicate Check Disable Duplicate Check Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
ARCODES 12.12 Bluetooth Enable Bluetooth Power Disable Bluetooth Power Enter Pairing Mode Enable Discovering Disable Discovering Connect To Last Connecting to Disconnect HID Sync SPP Sync Bluetooth Profile = SPP Bluetooth Profile = HID iOS Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 158
Enable Auto Reconnect Disable Auto Reconnect Enable Auto Power On Disable Auto Power On Enable Auto Power Off Disable Auto Power Off Enable Beep Warning Disable Beep Warning Enable Power Off Msg Disable Power Off Msg Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 159
KDC User Manual 1D S PECIAL ARCODES Display BT MAC Address Display BT FW Version Enable Wakeup Nulls Disable Wakeup Nulls Enable BT Toggle Disable BT Toggle Enable BT Disconnect Button Disable BT Disconnect Button Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Auto Power On Time = 5sec Auto Power On Time = 6sec Auto Power On Time = 7sec Auto Power On Time = 8sec Auto Power On Time = 9sec Auto Power On Time = 10sec Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
BT Power Off Time = 9min BT Power Off Time = 10min BT Power Off Time = 11min BT Power Off Time = 12min BT Power Off Time = 13min BT Power Off Time = 14min Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 162
BT Power Off Time = 25min BT Power Off Time = 26min BT Power Off Time = 27min BT Power Off Time = 28min BT Power Off Time = 29min BT Power Off Time = 30min Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
HID Auto Lock Time = 2min HID Auto Lock Time = 3min HID Auto Lock Time = 4min HID Auto Lock Time = 5min HID Auto Lock Time = 10min HID Auto Lock Time = 15min Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
KDC User Manual 1D S PECIAL ARCODES 12.16 HID Keyboard HID Keyboard = US HID Keyboard = German HID Keyboard = French HID Keyboard = Italian HID Keyboard = Spanish Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
ARCODES 12.18 HID Character Delay HID Character Delay = Disabled HID Character Delay = 10msec HID Character Delay = 20msec HID Character Delay = 30msec HID Character Delay = 50msec HID Character Delay = 100msec Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
KDC User Manual 1D S PECIAL ARCODES 12.19 HID Control Character HID Control Character = Disabled HID Control Character = Alt+Numpad HID Control Character = ^+Character HID Control Character = Replace with ‘|’ Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
KDC User Manual 1D S PECIAL ARCODES 12.28 Symbol Character “ & ‘ Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 181
KDC User Manual 1D S PECIAL ARCODES < > Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 182
A string would be composed by scanning the “Start-String”, Note number/alphabet/special characters, and “Stop-String” special barcodes. The KDC will abort string composition if the user do not scan “Stop-String” in one minute after scanning “Start-String” and number/alphabet/special characters. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Enable GPS Bypass Data Disable GPS Bypass Data Reset GPS Module GPS Acquire Test GPS Power Save Mode = Normal GPS Power Save Mode = Power Saving Enable GPS Auto Power Off Disable GPS Auto Power Off Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Auto Power Off = 0min (Disabled) Auto Power Off = 5min Auto Power Off = 10min Auto Power Off = 20min Auto Power Off = 30min Auto Power Off = 60min Auto Power Off = 120min Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
1D S PECIAL ARCODES 12.31 NFC (NFC Model Only) Enable NFC Power Disable NFC Power NFC Data Format = Data only NFC Data Format = Packet data UID Only = Enable UID Only = Disable Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
12.32 USB Disk USB Disk Mode USB Disable Mode Format USB Disk USB HID Mode Data Format = Data Data Format = Data, Time Data Format = Data, Type Data Format = Data, Time, Type Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Technology enabled scanner user manual, such as 4600 or 4820. 13.3 Delete Last Scanned Barcode Delete Last Scanned Barcode 13.4 Scan Options Enable Auto Trigger Disable Auto Trigger Reread Delay = Continuous Reread Delay = Short Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 188
KDC User Manual 2D S PECIAL ARCODES Reread Delay = Medium Reread Delay = Long Reread Delay = Extra Long Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
2D S PECIAL ARCODES 13.7 Image Capture (except KDC30) Capture Now Enable Image Capture Image Format = JPEG Image Format = BMP Pixel Depth = 1 bit per pixel Pixel Depth = 8 bit per pixel Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Wedge Only Wedge & Store Always Store Only Save if Sent Save if Not Sent Enable Enter Key (KDC350C Only) Disable Enter Key (KDC350C Only) Enable Extend Key (KDC350C Only) Disable Extend Key (KDC350C Only) Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Start Prefix Enter Start Suffix Enter Finish Prefix / Suffix Enter Cancel Prefix / Suffix Enter Delete Prefix Delete Suffix Display Prefix Display Suffix AIM ID None AIM ID In Prefix AIM ID In Suffix Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
KDC User Manual 2D S PECIAL ARCODES 13.10 Data Process – Data Format & Handshake Data format = Barcode only Data format = Packet data Enable Handshake Disable Handshake Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
13.11 Data Process - Termination Character & Duplicate Check Termination Character = None Termination Character = CR Termination Character = LF Termination Character = CR+LF Termination Character = Tab Enable Duplicate Check Disable Duplicate Check Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
ARCODES 13.12 Bluetooth Enable Bluetooth Power Disable Bluetooth Power Enter Pairing Mode Enable Discovering Disable Discovering Connect To Connect To Last Disconnect HID Sync SPP Sync Bluetooth Profile = SPP Bluetooth Profile = HID iOS Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 199
Enable Auto Reconnect Disable Auto Reconnect Enable Auto Power Off Disable Auto Power Off Enable Auto Power On Disable Auto Power On Enable Beep Warning Disable Beep Warning Enable Power Off Msg Disable Power Off Msg Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 200
KDC User Manual 2D S PECIAL ARCODES Display BT Mac Address Display BT FW Version Enable Wakeup Nulls Disable Wakeup Nulls Enable BT Toggle Disable BT Toggle Enable BT Disconnect Button Disable BT Disconnect Button Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Auto Power On Time = 5sec Auto Power On Time = 6sec Auto Power On Time = 7sec Auto Power On Time = 8sec Auto Power On Time = 9sec Auto Power On Time = 10sec Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
BT Power Off Time = 9min BT Power Off Time = 10min BT Power Off Time = 11min BT Power Off Time = 12min BT Power Off Time = 13min BT Power Off Time = 14min Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 203
BT Power Off Time = 25min BT Power Off Time = 26min BT Power Off Time = 27min BT Power Off Time = 28min BT Power Off Time = 29min BT Power Off Time = 30min Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
HID Auto Lock Time = 2min HID Auto Lock Time = 3min HID Auto Lock Time = 4min HID Auto Lock Time = 5min HID Auto Lock Time = 10min HID Auto Lock Time = 15min Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
KDC User Manual 2D S PECIAL ARCODES 13.16 HID Keyboard HID Keyboard = US HID Keyboard = German HID Keyboard = French HID Keyboard = Italian HID Keyboard = Spanish Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
ARCODES 13.18 HID Character Delay HID Character Delay = Disabled HID Character Delay = 10msec HID Character Delay = 20msec HID Character Delay = 30msec HID Character Delay = 50msec HID Character Delay = 100msec Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
KDC User Manual 2D S PECIAL ARCODES 13.19 HID Control Character HID Control Character = Disabled HID Control Character = Alt+Numpad HID Control Character = ^+Character HID Control Character = Replace with ‘|’ Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Memory Size = 2M / 2M Memory Size = 3M / 1M Memory Size = 4M / 0M Confirm memory size Memory Status Reset Memory Erase Memory Reset App data Reset BT Registry Enable Auto Erase Disable Auto Erase Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 210
Display Version Lock Button Unlock Button Enable Beep Sound Disable Beep Sound High Beep Volume Low Beep Volume Enable MFi Mode Disable MFi Mode Enable Vibrator Disable Vibrator Enable Auto Menu Exit Disable Auto Menu Exit Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 211
Display Format = Type & Battery Display Format = Memory Status Display Format = GPS Data(GPS Model) Display Format = Barcode Only Enable Menu Barcode Disable Menu Barcode Enable Scrolling Disable Scrolling Factory Default KDC Reset Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
KDC User Manual 2D S PECIAL ARCODES 13.27 Symbol Character “ & ‘ Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 221
KDC User Manual 2D S PECIAL ARCODES < > Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 222
A string would be composed by scanning the “Start-String”, Note number/alphabet/special characters, and “Stop-String” special barcodes. The KDC will abort string composition if the user do not scan “Stop-String” in one minute after scanning “Start-String” and number/alphabet/special characters. Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Enable GPS Bypass Data Disable GPS Bypass Data Reset GPS Module GPS Acquire Test GPS Power Save Mode = Power Saving GPS Power Save Mode = Normal Enable GPS Auto Power Off Disable GPS Auto Power Off Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Auto Power Off = 0min (Disabled) Auto Power Off = 5min Auto Power Off = 10min Auto Power Off = 20min Auto Power Off = 30min Auto Power Off = 60min Auto Power Off = 120min Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
2D S PECIAL ARCODES 13.30 NFC (NFC Model Only) Enable NFC Power Disable NFC Power NFC Data Format = Data only NFC Data Format = Packet data UID Only = Enable UID Only = Disable Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
2D S PECIAL ARCODES 13.31 USB Disk USB Disabled Mode USB Disk Mode Format USB Disk USB HID Mode Data Format = Data Data Format = Data,Time Data Format = Data,Type Data Format = Data,Time,Type Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
APPENDIX E - MSR Special Barcodes (KDC415/425MSR) 14.1 KDC415MSR Beep On Error No Beep On Error Beep On Error Data Format MSR Data Only Packet data Encrypt Mode Disabled Enable Track Enable Track1 Enable Track2 Enable Track3 Disable Track Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
Page 229
KDC User Manual MSR S PECIAL ARCODES AES Key Length = 256 bits MSR Card Type MSR Card Type = ISO MSR Card Type = Other 1 MSR Card Type = AAMVA Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
MSR S PECIAL ARCODES 14.2 KDC425MSR Beep On Error No Beep On Error Beep On Error Data Format MSR Data Only Packet data Encrypt Mode Disabled Enable Track Enable Track1 Enable Track2 Enable Track3 Disable Track Revision 3.06.A3 Copyright®2014, KOAMTAC, Inc.
New KDC firmware VersionR_305 introduces a feature to enable the user to make one special barcode to change multiple KDC configurations. 15.1 KDC20/KDC100/KDC250/KDC350L/KDC410/ KDC415 Barcode type Code128 is used to make a single special barcode and its format is as ...