Synchronize - KoamTac KDC20 User Manual

KDC User Manual
KTSync will not connect to the KDC if it is in the KDC Menus. You must EXIT

from the KDC Menus.
If KTSync fails to connect automatically to the KDC, please follow these

steps:
1. Exit KTSync.
2. Check to make sure that you have connected the KDC to a USB port on
your PC.
3. Make sure that the user is using the cable provided with the KDC.
4. Check to make sure that the KDC is not in KDC Mode Menu.
5. Restart KTSync.
You may manually assign the COM port using KTSync Connect option
Note
under the File menu.

Synchronize

Located under the File Menu, this option enables the user to manually synchronize
data on KDC with the host. This option is similar to clicking on the Synchronize button
in the KoamTac Data Synchronizer box.
Erase KDC Memory
Erase all stored data in the KDC internal memory.
S
YNCHRONIZATION
123