Reading Hf Rfid Tags (Kdc450/470) - KoamTac KDC20 User Manual

KDC User
YOUR
Reading NFC Tags (KDC350N/400N/KDC500)
1
. Enable the NFC Power option in the NFC Config menu.
2
. Touch the NFC tag to the back of the KDC350N/400N case (or NFC logo on the front
of the KDC500 case), and make sure the tag and case are within 5cm of each other.
3.
The KDC will show the NFC tag UID and the user will hear a short beep if it has
been read successfully.

Reading HF RFID Tags (KDC450/470)

The KDC450/470 may virtually read any ISO/IEC 14443 A or B compliant smartcards, or
ISO/IEC 15693 compliant HF RFID tags.
To read a HF RFID tag, touch the RFID card to the back of the KDC450/470 case, and
make sure the tag and case are within 5cm of each other. The user will hear a short
beep if it has been read successfully.
Inputting Data by Using a Keypad (KDC350)
The KDC350 Enables users to input barcode data by using its keypad. The user may
switch between Num mode and Abc mode by using the Mode button.
To switch between uppercase and lowercase letters, the user may press the Shift
button while in Abc mode. To save the data input, press the Enter or SCAN button. For
data input, press the Menu button. Refer to
for more detailed information about the process.
KDC
Figure 13 - Location for reading NFC Tag
1.5 Input data by using a keypad (KDC350)
50