Connect Button - KoamTac KDC20 User Manual

KDC User Manual

Connect Button

The user may connect the Mac with the KDC that is paired or plugged
into the USB port by clicking the Connect button. The following screen
will be displayed when this button is pressed, and KTSync will start to
connect to the selected KDC.
Disconnect Button
KTSync changes Connect button to Disconnect button once the KDC is
connected. The user may disconnect the KDC manually by selecting
connected KDC on the following screen.
Synchronize Button
The user may start the synchronization process by pressing the
Synchronize button. The user may select the destination of barcode data
in the settings menu. There are 4 selectable destinations: File, Internal
viewer, Active window, and User application.
Clear Button
The user may press this button to clear the KTSync internal viewer.
Settings Button
The user may configure synchronization options on the following
screen by pressing the Settings button.
S
YNCHRONIZATION
147