KoamTac KDC20 User Manual page 100

KDC User
YOUR
Serial Number(KDC500 only)
KDC500 displays the serial number
Button Lock
This option enables the user to lock or unlock the KDC scan and scroll
buttons.(KDC500 doesn't support)
Beep Alert

Beep Sound: Enables or disables KDC beep sound.

Power On Beep: Enables or disables beep sound when KDC power is on.

Beep On Connect: Enables or disables beep sound when KDC is connected to
the host.

Beep On Scan: Enables or disables beep sound when KDC is scanning.

Beep On MS Card (KDC500 only) : Enables or disables beep sound when KDC
reads a MS Card.

Beep On IC Card (KDC500 only) : Enables or disables beep sound when KDC
reads an EMV Contact Card.

Beep On NFC Card (KDC500 only) : Enables or disables beep sound when
KDC reads an NFC Tag or EMV Contactless Card.
Beep Volume
This option enables the user to adjust the beep volume from High to Low.
MFi Mode (KDC20i/30i/200i/250i/270i/300i/350i/400i/470i)
This option Enables user to enable or disable MFi mode. MFi mode supports SPP and
MFi Bluetooth profiles. Non-MFi mode supports SPP, SPP2.0, HID iOS and HID normal.
Vibrator(KDC20/30/270/350)
Enables, disables and configure KDC vibrator.

There are two additional options for KDC vibrator configuration.
o Scan Success  Specify the number of vibration when scan
successfully.
o Scan Failure  Specify the number of vibration when scan failed.
Auto Exit
This option enables KDC to automatically exit KDC Menus.
KDC
100