Synchronization Options - KoamTac KDC20 User Manual

KDC User Manual
Enable Wedge (Handheld Scanner Mode)
This option will be checked if Wedge Only or Wedge & Store option is selected.
Keep Scan Data in KDC
This option will be checked if Store Only or Wedge & Store option is selected.

Synchronization Options

Synchronize KDC Time with PC Time when Connected
This option enables the user to synchronize the KDC date and time with the host date
and time. Synchronization of date and time occurs after the data is uploaded to the
host device.
Delays
The user may set transmission delays between barcodes and characters during the
synchronization process. It is important to set proper delays to prevent errors during
the transmission of collected barcodes. Some Windows applications, such as Excel,
require longer delay times.
Attachments
Timestamp, Barcode Type, and Serial Number may be attached to the scanned
barcode by selecting these options. The Serial Number of the KDC may be attached
to the Start or End of Record.
Prefix and Suffix
Enter the characters the user wants to attach to the front (Prefix) or back (Suffix)

of the barcode in the Prefix and Suffix fields.
The character set is any combination of ASCII characters including

alphanumeric, line feed ("\n"), and carriage return ("\r").
Order and Delimiter
Select Order of Data – Type, Data, and Timestamp

Select the Delimiter between Data – Tab, Space, Comma, and Semicolon

Select the Delimiter between Records – None, LF, CR, Tab, and <LF & CR>

S
YNCHRONIZATION
129