Fw Version - KoamTac KDC20 User Manual

KDC User Manual

FW Version

The user may verify the KDC Bluetooth firmware version in this menu.
Wakeup Nulls
The KDC sends three leading Null bytes to wake up the
This feature may be disabled if the
additional bytes to wake up. KDC500 doesn't support this option.
Autolock Time
The iPhone/iPad/iPod touch loses incoming Bluetooth data while in sleep mode. To
prevent data loss, you may set the KDC Autolock time to the same Autolock time of your
iPhone/iPad/iPod touch, to use the automatic wakeup feature in HID mode. KDC500
doesn't support this option.
If the Autolock time is set to more than one minute and the barcode scan interval is larger
than the auto-lock time, there will be a one second delay of barcode transmission. The
auto-lock time would be set as 0, 1, 2, 3, 4, 5, 10, 15 minutes. 0 means the
iPhone/iPad/iPod touch never enters sleep mode. This option may not need from iOS 5.x.
HID Keyboard
The user may select an international keyboard – English, German, French, Spanish, or
Italian. It is also required to set the host keyboard with the same keyboard as selected
in this menu. KDC500 doesn't support this option.
HID Initial and Inter-Character Delay
Certain applications may not process HID input fast enough and may lose some
characters during transmission. Users should increase initial and inter-character delay
to prevent data loss during HID transmission. KDC500 doesn't support this option.
HID Initial Delay: Defines the initial delay between 1 sec to 10 sec before

data transmission in HID mode.
HID Inter-character Delay: Defines the inter-character delay between

10msec to 100msec in HID mode.
Control Character Transmission in HID mode
Control characters between ASCII values 0x00 and 0x1F may be replaced by the
ALT+Numpad or ^+Character or replaced with '|'. KDC500 doesn't support this option.
Bluetooth connected device does not require
B
LUETOOTH
Bluetooth
connected device.
113