Page 2: Table Of Contents
KDC Characteristics....................... 23 Keypad Functionality for KDC350 ..................27 Keypad Functionality for KDC500 ..................28 Input data by using a keypad (KDC350) ................29 Turn on the power of KDC20/30/350/400/500 ..............30 INSTALLATION Bluetooth Pairing ........................32 Preparing for Pairing ......................32 Pairing ...........................
Page 3 Empty Battery ........................87 KDC100/200/250/300/270/350 ....................87 KDC20/30/400 ........................87 KDC500 ..........................87 Buffer Full ..........................88 Reset Feature (100/200/250/300) or Power-on/off (KDC20/30/270/350/400/500) ....89 Replace Battery ........................90 BLUETOOTH -KDC20/30/200/250/300/270/350/400/500 Bluetooth Config ........................91 Connect Device ........................91 Auto Connect ......................... 92 Auto Reconnect ........................
Page 4 K K DC User Manual NTRODUCTION Wakeup Nulls ......................... 93 Autolock Time ........................93 HID Keyboard ......................... 94 HID Initial and Inter-Character Delay ..................94 Control Character Transmission in HID mode ................94 Function Key Transmission in HID mode ................. 95 Disconnect/Reconnect/BT(HID) Toggle ...................
Page 5 10.1 Symbologies ........................143 Bookland EAN vs. EAN-13 ..................... 143 Add-on Symbologies ......................144 10.2 Code Options (KDC20/100/200/250/270L/410/411/415/470L) ..........145 Reverse Direction ......................... 145 Symbology Conversion ......................145 Verification of Optional “Check Digit” ................... 146 Transmission of “Check Digit”....................146...
Page 6 Host Interface ........................151 11.3 Battery ..........................151 11.4 Memory ..........................152 11.5 Programming ........................152 APPENDIX C – 1D SPECIAL BARCODES (KDC20/20D/100/200/250/350L/350D/410/415) 12.1 Set Symbologies ......................... 154 12.2 Barcode Options ......................... 156 12.3 Delete Last Scanned Barcode ..................... 158 12.4 Scan Options ........................
Page 7 12.30 NFC (NFC Model Only) ....................199 12.31 USB Disk (M Model Only) ....................200 12.32 USB DM Button(KDC20/20D Only) .................. 200 12.33 WIFI (WIFI Model Only) ....................201 12.34 Multilanguage ......................... 202 APPENDIX D – 2D SPECIAL BARCODES (KDC30/300/350C/350WA/420/425/450) 13.1...
Page 8 K K DC User Manual NTRODUCTION 13.5 Scan Timeout ........................205 13.6 Minimum Barcode Length (except KDC30) ................. 206 13.7 Image Capture (except KDC30) ..................209 13.8 ScanIfConnect ........................209 13.9 Data Process - Wedge/Store, Enter Key & Extend Key ............210 13.10 Data Process - Data Edit ....................
Page 9 K K DC User Manual NTRODUCTION 13.32 UHF (UHF Model Only) ....................242 13.33 USB Disk (M Model Only) ....................245 13.34 USB DM Button(KDC30 only) ..................245 13.35 WIFI (WIFI Model Only) ....................246 13.36 CDMA (KDC350WA CDMA Model Only) ................ 248 13.37 Multilanguage .........................
Page 10 Sleep Timeout ......................... 292 16.15 NFC ..........................293 16.16 MSR ..........................293 16.17 ICCR(IC CARD READER) ....................295 16.18 Key Management ......................295 16.19 Multilanguage ......................... 296 APPENDIX G – MULTIPLE SPECIAL BARCODES 17.1 KDC20/100/250/270L/350L/410/411/415/470L/500L ............. 297 17.2 KDC30/270C/300/350C/420/421/425/450/470C/500C ............297...
Page 11 18.1 KDC470 ..........................299 List of Figures Figure 1 - How to turn on the power in KDC20/30/350/400/500 Figure 2 - Selecting a Bluetooth device type from the KDC menu Figure 3 - Selecting Pairing mode in KDC Figure 4 - Pairing mode button...
Page 12 K K DC User Manual NTRODUCTION Figure 24 - KTSync Synchronization Settings Figure 25 - Barcode & KDC Settings, Symbologies, Data Editing and Scan Options ® Figure 26 - KTSync Confirmation Settings Figure 27 - KDC Menu in KTSync Figure 28 - Mobile pKTSync Figure 29 - Android aKTSync Figure 30 - iPad/iPhone/iPod touch KTSync Figure 31 - Blackberry bKTSync...
Page 13 K K DC User Manual NTRODUCTION List of Tables Table 1 - Features of KDC Table 2 - Number of hours required to fully charge a KDC Battery Table 3 - KDC Menu Table 4 - KDC30/300/350C/420/450/500C Minimum Barcode Length Table 5 - Explanation of LEDs Table 6 - Troubleshooting Techniques Table 7 - Symbologies Supported by KDC...
Page 14 KOAMTAC, Inc. The material in this manual is subject to change without notice. KOAMTAC reserves the right to make changes to any product to improve reliability, function, or design. KOAMTAC does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.
Page 15: Regulatory Compliance
K K DC User Manual NTRODUCTION Regulatory Compliance FCC ID: VH9KDC20, VH9KDC30, VH9KDC100, VH9KDC200, VH9KDC250, VH9KDC270, VH9KDC300, VH9KDC350, VH9KDC350WA, VH9KDC400, VH9KDC450, VH9KDC470, VH9KDC500A This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.
Page 16 ETSI EN 300 328:V1.7.1 (2006-10) ESTR0801-018(1) Complies Spectrum Use Japan 003WWA080049, 003WWA090274, 208-120048, 208WW110041, 208-130029, 208-140011, 208-140049 Article 2-1-19, 2.4GHz Wide Band low power data communication system Japan 2014026493, 2014027753 Korea MSIP-CMM-A13-KDC20, MSIP-CMM-A13-KDC30, AI3-KDC100, AI3-KDC200, MSIP-CMM-A13-KDC250, MSIP-CMM-A13-KDC350, MSIP-CMM-A13-KDC350, MSIP-CMM-A13- KDC400, MSIP-CMM-A13-KDC450...
Page 17: Laser Compliance
K K DC User Manual NTRODUCTION Laser Compliance KDC20/100/200/250/270L/350L/410/411/415/470L Complies with US 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice no. 50, dated June 24, 2007 and IEC 60825-1 (Ed. 2.0) Complies with IEC60825-1:1993 + A1:1997 + A2:2001 Battery Warning This device contains a rechargeable NiMH.
Page 18 (iv) damage caused by service performed by anyone who is not an authorized service provider of KOAMTAC; or (v) damage to a product that has been modified or altered without the prior written permission of KOAMTAC.
Page 19 We will pay for shipping to return any product to you. Email us at rma@koamtac.com to obtain an RMA number. Once you have obtained the RMA number, please send us your purchased KOAMTAC product with the RMA number clearly marked on the outside of the package and on the shipping slip if you choose to use traceable carriers such as UPS or FEDEX.
Page 20: Introduction
K K DC User Manual NTRODUCTION 1. Introduction Congratulations on purchasing a revolutionary KOAMTAC KDC. KOAMTAC’s KDC works with a wide variety of portable applications. Use it independently or as a PC, PDA, or smartphone/tablet accessory. (*KDC350WA: KDC350WA follows KDC350 unless mentioned explicitly) FEATURES...
Page 21: Kdc Package Contents
KDC20/30 (N/A) z KDC100/200/250/300/350 (8pin Ultra-mini USB Cable) z KDC270/400/450/470/500 (5pin Micro USB Cable) 3. One Lanyard (KDC20/30/100/200/250/300/270/350) or One Hand Strap (KDC400/450/470/500) 4. One KDC Protective Rubber Boot (KDC100/200/250/300). The following KDC accessories are available to purchase at koamtac.com...
Page 22 K K DC User Manual NTRODUCTION KDC20/30 Package Contents KDC100/200/250/300 Package Contents KDC400/450 /470 KDC270/KDC350 Package Contents Package Contents KDC350WA KDC500 Package Contents Package Contents...
Page 23: Kdc Characteristics
DELETE buttons, OLED display, LED, and ports on the KDC. Although KDC models consist of similar buttons and LEDs, each model has different characteristics for its own purpose of use. The KDC20/30/100 includes a swing-out USB connector and the KDC350/500 has a keypad.
Page 24 K K DC User Manual NTRODUCTION KDC100 Barcode Reader and Data Collector Green/Red/Orange LEDs OLED Display SCAN Button UP Button DOWN Button Ultra-mini USB Port Type A USB Swing Out KDC100 KDC200/250/300/270/350 Barcode Reader and Data Collector Green/Red/Orange LEDs OLED Display UP Button SCAN Button DOWN Button...
Page 25 K K DC User Manual NTRODUCTION Green/Red/Orange LEDs UP Button OLED Display DOWN Button Scan Button Ultra-mini USB Port KDC2700 Green/Red/Orange LEDs Function Button Menu DOWN Button UP Button SCAN Button Shift Keypad Ultra-mini USB Port KDC350 KDC400/450/470 Barcode Reader and Data Collector...
Page 26 K K DC User Manual NTRODUCTION Green/Red/Orange LEDs UP Button Buzzer Hole DOWN Button Scan Button Micro USB Port KDC470 KDC500 Mobile POS 1D/2D Barcode Scanner Right SCAN Button Left SCAN Button OLED Display NFC Reader Green/Red/Orange LEDs Magnetic-Stripe Secure Touch Keypad Card Reader ICCR (IC Card Reader) Micro USB...
Page 27: Keypad Functionality For Kdc350
K K DC User Manual NTRODUCTION 1.3 Keypad Functionality for KDC350 Enables the user to enter or exit the KDC Menu. While in menu mode, press once to exit. Enables the user to change character input mode from capital letters to small letters, and vice versa.
Page 28: Keypad Functionality For Kdc500
K K DC User Manual NTRODUCTION 1.4 Keypad Functionality for KDC500 While in the KDC500 menu, press this button to scroll down the selection bar. While on the main screen, press this button for 5 seconds then the KDC500 will enter the KDC500 menu mode. (Menu/Down button) While in the KDC500 menu, press this button to scroll up the selection bar.
Page 29: Input Data By Using A Keypad (Kdc350)
K K DC User Manual NTRODUCTION 1.5 Input data by using a keypad (KDC350) When the KDC350 shows a blank main screen, you may start pressing numbers or characters of the barcode data that needs to be input. See an example below: How to save the barcode data “123Koamtac”. Press M M ode to switch to...
Page 30: Turn On The Power Of Kdc20/30/350/400/500
K K DC User Manual NTRODUCTION 1.6 Turn on the power of KDC20/30/350/400/500 KDC20/30/270/350/400/470/500 have power on/off switch. Please turn on the power first before using the device. KDC2 2 0/30 Press SCAN and DOWN SCAN buttons simultaneously for 5 seconds. The user will hear a beep sound when it is turned on.
Page 31: Figure 1 - How To Turn On The Power In Kdc20/30/350/400/500
Press Left and Right SCAN buttons simultaneously for 5 seconds. The user will see a KOAMTAC logo in the display and hear a beep sound when it is turned on. Figure 1 - How to turn on the power in KDC20/30/350/400/500...
Page 32: Installation
K K DC User Manual Installation 2. Installation 2.1 Bluetooth Pairing The KDC may read and store barcode data independently, but it may also be used in conjunction with a PC, PDA, or smart device. In order to read barcode data with your KDC wirelessly, the user must first pair the KDC and smart device via Bluetooth.
Page 33 K K DC User Manual Installation KDC 20/100/200/250/270L/350L/410/411/415/470L/500L (1D) Bluetooth Profile SPP Bluetooth Profile HID iOS Bluetooth Profile MFi Bluetooth Profile SPP2.0 Bluetooth Profile HID normal For PCI PTS compliance, KDC500L supports only Bluetooth Profile SPP and MFi.
Page 34: Figure 2 - Selecting A Bluetooth Device Type From The Kdc Menu
K K DC User Manual Installation KDC30/300/270C/350C/420/421/425/450/470C/500C (2D) Bluetooth Profile SPP Bluetooth Profile HID iOS Bluetooth Profile MFi Bluetooth Profile SPP2.0 Bluetooth Profile HID normal For PCI PTS compliance, KDC500C supports only Bluetooth Profile SPP and MFi. Some KDCs are equipped with an LCD screen (KDC100/200/250/300/270/350/500), the user may select a Bluetooth profile from the ConnectDevice menu as shown below.
Page 35: Pairing
K K DC User Manual Installation Pairing First Option: Connect the KDC from a host (PC or Smart Device) This method is recommended for first-time users or when the user is only connecting a few KDCs. Put the KDC into Pairing mode Select the correct pairing barcode and scan below for your KDC model, or KDC 20/100/200/250/270L/350L/410/411/415/470L/500L (1D) KDC30/300/270C/350C/420/421/425/470C/500C (2D)
Page 36: Figure 5 - Pairing Menu Shortcut Button In Kdc500
K K DC User Manual Installation For the KDC500, press the FN button for five seconds in order to directly enter the BT Service menu while it is not in the sleep mode. Press F F N B B utton for 5 seconds while KDC500 is not the sleep mode Figure 5 - Pairing menu shortcut button in KDC500...
Page 37 After it has been installed, open KTSync and it will automatically find and connect to the KDC. (Refer to 2.2 KOAMTAC Installation Wizard for more information about installing KTSync). Second Option: Connect the host device from the KDC by scanning a Special Bluetooth MAC...
Page 38: Figure 6 - Finding Bluetooth Mac Address
1D CCD barcode scanners may read barcodes that have been printed barcodes that are on a LCD screen. 1D laser barcode scanners such as the KDC20/100/200/250/270L/350L/410/411/415/470L/500L models are not designed to read barcodes from a LCD screen and will only read printed barcodes.
Page 39: Figure 7 - Connecting Kdc With A Smart Phone By Scanning Bluetooth Mac Address Barcode
Figure 7 - Connecting KDC with a smart phone by scanning Bluetooth MAC Address Barcode Open KTSync after it has been installed, and it will automatically find the KDC and connect. (Refer to 2.2 KOAMTAC Installation Wizard for more information about installing KTSync)
Page 40: Koamtac Installation Wizard
Click Start icon then My Computer icon. A list of devices on the computer will be displayed, including the disk drive containing the KOAMTAC Installation CD. Click on the KOAMTAC Installation CD icon, then the Setup directory. Click on the PC_Setup.exe file, which will execute the KTSync Setup Wizard.
Page 41 K K DC User Manual Installation In the KTSync Installation Complete window, click Close and wait for the Device Driver Installation Wizard. In the Windows Security window, click Install to complete installation. Connect KDC to Computer Using the USB cable included with the KDC or built-in swing out USB connector, follow the directions below.
Page 42: Android
Verify COM Port Address The installed COM Port may be verified in Device Manager. Android Download and install KTSync from the Android Play Store. https://play.google.com/store/apps/details?id=com.koamtac.ktsync&hl BlackberryDownload and install KTSync from the Blackberry App World. http://appworld.blackberry.com/webstore/content/16861?lang=en iPad/iPhone/iPod Touch Download and install KTSync from the Apple App Store.
Page 43: Operating Your Kdc
In addition, the user should not swing the KDC by its lanyard or hand strap. Impact with another object may cause the KDC to malfunction or damage. To attach a lanyard/hand strap: KDC20/30 KDC100/200/300/270/350/400 KDC500 Fit the thin...
Page 44: Charge Kdc Battery
The KDC battery will begin charging. Within a few minutes, the two small LEDs (three LEDs in case of KDC500) on the front panel will illuminate orange. When the battery is fully charged, the LEDs will illuminate green. KDC100 KDC20/200 KDC30/250/300/270 KDC350 KDC400...
Page 45: Figure 9 - Location And Use Of Buttons On A Keypad (Kdc350)
KDC menu. Move the menu bar up and down by pressing the Buttons, and configure the KDC by pressing the SCAN Button to select a menu. Figure 10 - Location and use of buttons on a keypad (KDC500) CONFIGURATION METHODS FOR KDC20/30/400 KTSync Software Special Barcodes...
Page 46: Basics
K K DC User YOUR 3.2 Basics Reading Barcodes To read a barcode using the KDC, simply point the KDC at a barcode and press the scan button. Be sure to point the scan engine window at the barcode, not at the user’s face, and make sure to position the light beam on the barcode.
Page 47: Read Barcodes With Gps Coordinates (Kdc250G/350G)
K K DC User YOUR Modify the angle of the KDC in relation to the barcode, making the angle more wide or narrow as needed. (Laser Model) Modify the distance between the barcode and the KDC, moving closer or further away as needed.
Page 48: Reading Hf Rfid Tags (Kdc450/470)
K K DC User YOUR Figure 13 - Location for reading NFC Tag The KDC will show the NFC tag UID and the user will hear a short beep if it has been read successfully. Reading HF RFID Tags (KDC450/470) The KDC450/470 may virtually read any ISO/IEC 14443 A or B compliant smartcards, or ISO/IEC 15693 compliant HF RFID tags.
Page 49: Read Integrated Chip (Ic) Card(Kdc500)
K K DC User YOUR Read Integrated Chip (IC) Card(KDC500) The paired host application sends a command to enable the IC Card Reader. Insert IC Card into the IC Card slot located in the left side of KDC500. Make sure the IC of the card face to up.
Page 50: Kdc Menu
K K DC User YOUR 3.3 KDC Menu Top Menu Sub Menu Options KDC20 KDC30 KDC100 KDC200 KDC250 KDC300 KDC270L KDC350L KDC350C KDC Mode Normal Default Default Default Default Default Default Default Default Default Application Custom Custom Custom Custom Custom...
Page 51 K K DC User YOUR MaxiCode Enabled Enabled Enabled MicroPDF Enabled Enabled Enabled PDF417 Enabled Enabled Enabled QRCode Enabled Enabled Enabled HanXin Code Enabled Enabled Enabled Postal Codes Postnet Enabled Enabled Enabled PlanetCode Enabled Enabled Enabled UK Post Enabled Enabled Enabled Mayada Post Enabled...
Page 52 K K DC User YOUR 5DgtAddenda( Disabled Disabled Disabled Enabled/Disab led) Req. Addenda Disabled Disabled (Enabled/ Disabled) Sep. Addenda Enabled Enabled (Enabled/ Disabled) Coupon Code Enabled Enabled (Enabled/ Disabled) UPCE Expand Disabled Disabled Disabled (Enabled/ Disabled) Req. Addenda Disabled Disabled (Enabled/ Disabled) Sep.
Page 53 K K DC User YOUR Long, Extra Long Finger Trigger Enabled/Disab Enabled Enabled Enabled Enabled Enabled Partial Display Start Position No. of Char(s) 0 chars 0 chars 0 chars 0 chars 0 chars 0 chars 0 chars 0 chars 0 chars Action Select Select...
Page 54 K K DC User YOUR HID Ctrl Char Disabled, Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Alt+Numpad, ^+Character, Replace to | BT Service Power Enabled/ Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Disabled Pairing Pairing neighboring Bluetooth devices Discovering Discovering neighboring...
Page 55 K K DC User YOUR Graphic Menu Barcode Enabled/ Disabled Disabled Disabled Disabled Scrolling Enabled/ Enabled Enabled Enabled Enabled Enabled Enabled Enabled Disabled Brightness 1 to 15 level(8 8 level 8 level 8 level 8 level 8 level 8 level 8 level level) Keypad...
Page 56 K K DC User YOUR Top Menu Sub Menu Options KDC410/411 KDC415 KDC420/421 KDC425 KDC430 KDC450 KDC470C KDC500L KDC500C KDC Mode Normal Default Default Default Default Default Default Default Application View Data View/Delete View/Delete View/Delete Data Data Set Barcodes EAN13 Enabled/ Enabled Enabled...
Page 57 K K DC User YOUR Mayada Post Enabled Enabled Enabled Enabled Enabled Kix Post Enabled Enabled Enabled Enabled Enabled Australia Post Enabled Enabled Enabled Enabled Enabled Japan Post Enabled Enabled Enabled Enabled Enabled China Post Enabled Enabled Enabled Enabled Enabled Korea Post Enabled Enabled...
Page 58 K K DC User YOUR Sep. Addenda Enabled Enabled Enabled Enabled Enabled (Enabled/ Disabled) Check Digit Enabled Enabled Enabled Enabled Enabled (Enabled/ Disabled) NumberSys(Ena Enabled Enabled Enabled Enabled Enabled bled/ Disabled) 2DgtAddenda(E Disabled Disabled Disabled Disabled Disabled nabled/Disabled 5DgtAddenda(E Disabled Disabled Disabled Disabled...
Page 59 K K DC User YOUR Data Editor/AIM None/In None None None None None None None None Prefix/In Suffix Data Start Position Editor/Partial No. of Char(s) 0 chars 0 chars 0 chars 0 chars 0 chars 0 chars 0 chars 0 chars Data Action Select...
Page 60 K K DC User YOUR USB Config-USB USB Mode USB Serial/USB Disk Mode Disk/USB HID (M model) Disk Format Format KDC USB Disk Data Format Data,DataTime, DataType,DataTi meType USB Config-USB USB Mode USB Serial/USB Disk/USB HID HID Mode (M model) NFC Config NFC Power Enabled/...
Page 61: Table 3 - Kdc Menu
K K DC User YOUR Null Check Enabled/ Disabled Disabled Track1 Disabled Null Check Enabled/ Enabled Enabled Track2 Disabled Null Check Enabled/ Disabled Disabled Track3 Disabled Beep on error Enabled/ Disabled Disabled Disabled Enabled Enabled reading Disabled Encrypt MSR Enabled/ Disabled Disabled Disabled...
Page 62: Kdc Mode Menu
This menu option enables the user to view and/or delete barcodes stored in the KDC. In the case of the KDC20/30, you may delete the last scanned barcode by pressing the DELETE button on the right side of the unit.
Page 63 Minimum Barcode Length This option enables the user to set a barcode length from 2 characters to 36 characters (KDC20/100/200/250/270L/350L/410/411/415/470L/500L) or 2 characters to 48 characters (KDC30/300/350C/420/421/425/450/470C/500C). It is strongly recommended that you maximize the minimum barcode length setting to prevent possible errors.
Page 64: Table 4 - Kdc30/300/350C/420/450/500C Minimum Barcode Length
K K DC User YOUR AztecCode 1(1) 3750(3750) AztecRunes CodablockF 1(1) 2048(2048) Code16K 0(1) 160(160) Code49 1(1) 81(81) 2D Symbology DataMatrix 1(1) 1500(1500) MaxiCode 1(1) 150(150) MicroPDF 1(1) 366(366) PDF417 1(1) 2750(2750) QRCode 1(1) 3500(3500) HanXin Code Postnet PlanetCode UK Post Mayada Post Postal Codes Kix Post...
Page 65: Data Process Menu
K K DC User YOUR option.(1D Model only) x USB cable insertion requirement is removed from FW2.85/86.O and FW 3.02. x You may exit the auto trigger mode by pressing the scan button for 3 seconds. Reread Delay You may adjust the reread delay from continuous to extra-long. Partial Display This option enables the user to display partial data.
Page 66 This Prefix option is different from the Prefix option in KTSync, which attaches the prefix to data during synchronization. The user may also define the prefix by scanning characters defined in Appendix C&D(E&F for KDC500). as shown below in the special barcodes. KDC20/100/200/250/300/270L/350L/410/411/415/470L/500L Prefix Enter Start Prefix/Suffix Enter Finish KDC30/270C/350C/420/421/425/450/470C/500C...
Page 67 K K DC User YOUR Users may also delete or display current prefixes by scanning the following special barcodes. KDC20/100/200/250/300/270L/350L/410/411/415/470L/500L Delete Prefix Display Prefix KDC30/270C/350C/420/421/425/450/470C/500C Delete Prefix Display Prefix...
Page 68 K K DC User YOUR Suffix - Enables the user to add a suffix to scanned data, which may then be wedged to the host. The suffix must be defined in the KTSync. The maximum length for a suffix is 11 characters.
Page 69 K K DC User YOUR Prefix/Suffix Enter Finish The user may also delete or display a current suffix by scanning the following special barcodes. KDC20/100/200/250/300/270L/350L/410/411/415/470L/500L Delete Suffix Display Suffix KDC30/270C/350C/420/421/425/450/470C/500C Delete Suffix Display Suffix AIM ID - Enables the user to add AIM ID to scanned data, which may then be wedged to the host.
Page 70 K K DC User YOUR start position and number of characters to be stored and/or transferred. The user also can select if taking or erasing the characters selected with Start position and No of char(s). ¾ Start position ‹ This option specifies the start position of data. ¾...
Page 71: Bt Config Menu - Kdc20/30/200/250/300/270/350/400/500
K K DC User YOUR BT Config Menu – KDC20/30/200/250/300/270/350/400/500 The KDC supports Bluetooth Ver2.1+EDR. Before utilizing the advantages of Bluetooth functionality with the KDC, the user should become familiar with Bluetooth connectivity and its impact on the host environment.
Page 72 K K DC User YOUR Beep Warning Enabled or Disabled(KDC500 doesn’t support) PWR Off Time 1 to 30 Minutes(KDC500 doesn’t support) PowerOff Msg Enabled or Disabled(KDC500 doesn’t support) MAC Address When users select this option, KDC displays 12 characters Bluetooth MAC Address. FW Version This option displays Bluetooth Firmware Version Wakeup Nulls...
Page 73: Bt Service Menu - Kdc20/30/200/250/300/270/350/400/500
K K DC User YOUR BT Service Menu – KDC20/30/200/250/300/270/350/400/500 Power Users may choose to turn Bluetooth Power on or off. Select between Enable and Disable. Pairing Mode This option Enables user to enter pairing mode by simply selecting this menu.
Page 74: Usb Mode Menu- 100M/200M/250M/300M/270/350
K K DC User YOUR a period of time. Power Mode: The user may choose the type power consumption for the GPS function. ¾ Users may extend the battery life of the GPS enabled model in Power Save mode. ¾ Users should use normal mode if accurate GPS data is required. ¾...
Page 75 K K DC User YOUR This option enables the user to change to USB Disk mode and barcode data that KDC scanned is stored into a file in flash disk when this option is selected. KDC100M/200M/250M/300M/350 may be used as USB Disk with 4MB or 8MB space and KDC270 may be used as USB Disk with 8MB space.
Page 76: Nfc Config Menu - Kdc350N/411N/415N/421N/425N/500
K K DC User YOUR NFC Config Menu – KDC350N/411N/415N/421N/425N/500 NFC Power Turning NFC Power on or off Options: Enable/Disable Data Format Options: Data only/Packet data.(KDC500 doesn’t support) UID Only Enable or Disable UID Only menu The KDC only sends UID data to the host device when the KDC is in UID Only mode. (KDC500 doesn’t support) UHF Config Menu –...
Page 77: Wifi Config Menu (Kdc350F)
K K DC User YOUR Smart Hopping It enables KDC450U to find an optimized UHF channel and can be initiated by reading a special barcode. WIFI Config Menu (KDC350F) KDC350F WiFi model can send and receive data to/from host by using the following protocols. HTTP_GET HTTP_POST In UDP/TCP mode, KDC350F will support full duplex mode, meaning is the KDC350F will be ready to...
Page 78: Cdma Config Menu (Kdc350Wa Cdma)
K K DC User YOUR Send Stored Enable/Disable KDC to send stored data when sending a new read data. CDMA Config Menu (KDC350WA CDMA) KDC350WA CDMA model can send and receive data to/from host by using the following protocols if and only if the device is activated and the Verizon network is available.
Page 79: Msr Config Menu - Kdc415/425/430/500
K K DC User YOUR Enable/Disable KDC to reconnect to Server when it detects disconnection from Server. Send Stored Enable/Disable KDC to send stored data when sending a new read data. Information Displays CDMA module firmware version, the CDMA number, MEID, and IP address. MSR Config Menu –...
Page 80 K K DC User YOUR AES Key length(KDC415/425/430 only) Specify the AES key length. Options: 128bits/192bits/256bits Card Type The user may select which type of MS card to read. OTHER 1 AAMVA JIS(KDC500 only) Track Separator(KDC415/425/430 only) Specify the separator which will be added between track data Options: None, Space, Comma, Semicolon, CR, LF, CR&LF, Tab Attach SS/ES When this option is enabled, KDC does not exclude the Start Sentinal(SS) and End Sentinal(ES)
Page 81: Iccr Config Menu - Kdc500
K K DC User YOUR ICCR Config Menu – KDC500 Power Turning ICCR(IC Card Reader) on or off Options: Enable/Disable IFD Number This option shows the EMV IFD(Interface Device) number. Config Number The option shows the stored EMV Contact Configuration number.
Page 82: Systemconfig Menu
K K DC User YOUR SystemConfig Menu Memory Size (3.0+ version only, KDC500 doesn’t support) The user may select how much memory to divide between normal data memory and application database memory. The KDC will erase all stored data upon changing the partition size. The user should enter the following key sequence to change the partition.
Page 83 This option Enables user to enable or disable MFi mode. MFi mode supports SPP and MFi Bluetooth profiles. Non-MFi mode supports SPP, SPP2.0, HID iOS and HID normal. Vibrator(KDC20/30/270/350) Enables, disables and configure KDC vibrator. There are two additional options for KDC vibrator configuration.
Page 84 K K DC User YOUR Keypad(KDC350/500) This option enables users to enter data by using keypad. Language(Version 3.0+, KDC500) This option enables users to select KDC display languages. The supported languages are as following. None – Languages is not supported. Default is an English. US(English) French Italian...
Page 85: Key Mgmt Menu- Kdc500
K K DC User YOUR Key Mgmt Menu– KDC500 Stored Keys : Displays all the encryption keys stored in the KDC500. Inject Keys : In this menu, the user can inject the necessary encryption keys via Key Loader device.
Page 86: Sensitive Menu - Kdc500
K K DC User YOUR Sensitive Menu – KDC500 KDC500 Sensitive menu has sub menus which can impact on the KDC500 security services. KDC500 requires two passwords for the Sensitive menu group access in order to ensure only authorized people can utilize the sensitive services. The default passwords are 0000000 and 11111111. x For PCI PTS compliance, the default passwords should be changed prior to use.
Page 87: Led Status
The KDC will display the message Empty Battery Connect USB when the battery is empty. Please charge the KDC IMMEDIATELY to prevent any interruptions while it is collecting data. KDC20/30/400 Under 30% - Orange LED flickers at 1-second-intervals for 5 seconds every minute.
Page 88: Buffer Full
K K DC User YOUR 3.6 Buffer Full The KDC will display the message Buffer Full when there is no more space in the flash memory or the number of collected barcodes reaches the maximum number of stored barcode. To prevent the loss of data, you should synchronize the data then reset the memory when this message is displayed.
Page 89: Reset Feature (100/200/250/300) Or Power-On/Off (Kdc20/30/270/350/400/500)
If you are using the KDC20/30/270/350, you may turn the power on and off by pressing the DOWN and SCAN button simultaneously for 5 seconds. When the LED light is green, you may release the buttons and the power will be on.
Page 90: Replace Battery
KDC charging cradle, and may be recharged about 300 times before it needs to be replaced. KOAMTAC recommends replacing the battery annually, as a declining battery will cause noticeable performance degradation in the KDC. Replacement batteries may be purchased from a KDC reseller.
Page 91: Bluetooth Config
For PCI PTS compliance, KDC500 can support only SPP and MFi profiles. The KDC200/250/300/270/350/500’s Bluetooth options may be configured by using the KDC menu, PC KTSync and special barcodes. The KDC20/30/400’s Bluetooth options may be configured by using the PC KTSync and special barcodes.
Page 92: Auto Connect
K K DC User Manual LUETOOTH The user should first un-pair the KDC from the Bluetooth host to change the Connect Device setting on the scanner to a different Bluetooth profile. Auto Connect This feature enables the KDC to automatically connect to the host device when the KDC is powered on.
Page 93: Beep Warning
K K DC User Manual LUETOOTH The default for this option is disabled. It is strongly recommended to keep it enabled to maximize the operation time of the KDC. If Auto Power Off is Enabled, Bluetooth may be manually powered off before the specified time in the PWR off time option.
Page 94: Hid Keyboard
K K DC User Manual LUETOOTH If the Autolock time is set to more than one minute and the barcode scan interval is larger than the auto-lock time, there will be a one second delay of barcode transmission. The auto-lock time would be set as 0, 1, 2, 3, 4, 5, 10, 15 minutes.
Page 95: Function Key Transmission In Hid Mode
K K DC User Manual LUETOOTH Function Key Transmission in HID mode The user may send F1 to F12 function keys by scanning special barcodes in HID mode. KDC500 doesn’t support this option. Disconnect/Reconnect/BT(HID) Toggle The user may disconnect or reconnect the Bluetooth connection, and toggle the soft keyboard using side buttons.
Page 96: Bluetooth Service
IMPORTANT: The host device must be configured for Bluetooth before it may be paired to the KDC. KDC with Bluetooth Spec2.1+EDR does not prompt Pin code entry menu. To pair the KDC20/30/200/250/300/270/350/400 with the host, follow these instructions: Select Pairing from the Bluetooth menu. The message “Pairing started…” will be displayed.
Page 97: Discovering
This option lets you easily connect the KDC to Bluetooth devices that have been either previously registered in KTSync under the File Menu or discovered/connected from the KDC Bluetooth Service menu. KDC20/30/400 only supports via KTSync configuration. KDC500 doesn’t support this feature. There could be an interoperability issue depending on the corresponding device Bluetooth stack.
Page 98: Auto Pairing
K K DC User Manual LUETOOTH The iPhone/iPad/iPod touch will find a new device as Keyboard Click Keyboard device iOS Soft Keyboard Toggling using BT Toggle Option. Users need to select the option to use this feature in BT Config>BT Toggle. Press the DOWN button to toggle a soft keyboard.
Page 99: Synchronization
K K DC User Manual YNCHRONIZATION 5. Synchronization When barcode data is collected, it must be uploaded to your application. KTSync, which is bundled with the KDC, is a software that Enables barcode data to be uploaded to any PC, PDA, or smartphone running Android 2.1+, Apple iOS3.1.3+, Blackberry,Mac and Windows XP/Vista/7/8/10/Mobile 5.0+.
Page 100: Ktsync Menu
Please do not use your computer during data synchronization. Bluetooth: This option is not available on KDC100/KDC500. Users may register a MAC address to be directly connected by KDC20/30/200/250/300/270/350/400. Configuration: This option Enables users to set different KDCs with same settings by exporting and importing settings from one KDC to the other.
Page 101: Figure 18 - Setting Menu
K K DC User Manual YNCHRONIZATION Settings Menu Synchronization: Select Synchronize options. Barcode & KDC: Select Barcode and KDC options. Others: Select Auto Connection and/or Synchronization Confirmation options. Figure 18 – Setting Menu Application Menu(KDC500 doesn’t support Application) Generation: Create user application or download predefined application. DB Lookup: Enables users to download DB into KDC and display barcode description field.
Page 102: File Menu
Synchronize Located under the File Menu, this option enables the user to manually synchronize data on KDC with the host. This option is similar to clicking on the Synchronize button in the KoamTac Data Synchronizer box. Erase KDC Memory...
Page 103: Bluetooth
K K DC User Manual YNCHRONIZATION Bluetooth This menu option enables the user to register up to ten Bluetooth devices, including their MAC address, PIN #, and optional prefixes or suffixes. This option enables direct Bluetooth connection between KDC and other Bluetooth devices, such as a Bluetooth printer. The user should choose a Bluetooth device to be connected in “Connect to”...
Page 104: Configuration
K K DC User Manual YNCHRONIZATION Configuration This menu is useful for the users who need to configure different KDCs with same settings. In this menu, you may export settings from a KDC to your computer and import it to other KDCs. When you select Configuration in File menu, you will need to choose either Export or Import.
Page 105: Synchronization Settings
K K DC User Manual YNCHRONIZATION Synchronization Settings KTSync provides several synchronization options for synchronizing data from your KDC to host devices. Figure 24 - KTSync Synchronization Settings Destination of Data When barcode data is uploaded to the host device, you must assign a destination for the data. Destination of Data options include:(This option is applied to only Windows XP/Vista/7/8/10) File - This option means data will be saved in the assigned filename.
Page 106: Synchronization Methods
K K DC User Manual YNCHRONIZATION Select from Current Running Application – This option enables the user to select a currently running application for data synchronization. • Data synchronization begins immediately if “Automatically Synchronize after Connection” is selected. If not selected, data synchronization is started manually by the user.
Page 107: Current Kdc Wedge Method
K K DC User Manual YNCHRONIZATION This option lets the user automatically synchronize collected data immediately to the computer when the KDC is connected to the host. IMPORTANT: Before selecting this option, remember to configure all options properly. Data synchronization may be done manually by clicking the synchronize icon if this option is not selected.
Page 108: Synchronization Options
K K DC User Manual YNCHRONIZATION Synchronization Options Synchronize KDC Time with PC Time when Connected This option enables the user to synchronize the KDC date and time with the host date and time. Synchronization of date and time occurs after the data is uploaded to the host device. Delays The user may set transmission delays between barcodes and characters during the synchronization process.
Page 109: Barcode & Kdc Settings
K K DC User Manual YNCHRONIZATION 5.3 Barcode & KDC Settings KTSync enables the user to configure the KDC Scan Options and Barcode Settings. The configuration options for the KDC using KTSync are similar to the Set Barcodes, Code Options, Data Editing and Scan Options on the KDC Menu.
Page 110: Select Symbologies And Symbology Options
K K DC User Manual YNCHRONIZATION Select Symbologies and Symbology Options The process for scanning and reading barcodes is delicate and complicated. Although your KDC is equipped with a high performance scan engine, if configured incorrectly it may not perform at its peak performance level.
Page 111: Other Settings
K K DC User Manual YNCHRONIZATION 5.4 Other Settings Other options under the Settings menu allow the user to select four additional settings: Ask Confirmation before Trying Auto Connection prevents unintentional launch of KTSync. Ask Confirmation before Starting Auto Synchronization prevents unintentional synchronization of data.
Page 112: Mobile Pktsync
K K DC User Manual YNCHRONIZATION KDC Menu in KTSync After connecting KDC to PC with a USB cable, run KTSync on your PC and you will see KDC Menu on the right side of KTSync window. Click KDC Menu, and you may configure your KDC in KDC Menu window, as shown below.
Page 113 K K DC User Manual YNCHRONIZATION For detailed explanations of these functions, please refer to earlier sections of this chapter. WARNING: The user must assign the correct COM port to KDC before using pKTSync. Please refer to the mobile device manual for details on Bluetooth pairing and COM port assignment methods. Figure 28 - Mobile pKTSync...
Page 114: Android Aktsync
K K DC User Manual YNCHRONIZATION 5.6 Android aKTSync The KTSync provides limited functionality of PC aKTSync to Android users. x aKTSync only supports Android devices with 2.1+ OS version and that are compatible with BluetoothChat application. x KDC with Bluetooth Spec2.1+EDR doesn’t prompt Pin code entry menu. KDC and Android Pairing Pairing Select SPP Bluetooth profile from the KDC ConnectDevice submenu in BT Config menu.
Page 115 K K DC User Manual YNCHRONIZATION B. From the list of paired devices, choose the KDC to use. C. On the top menu bar of aKTSync, you will see a message “connecting”, and then “connected”. D. On the KDC display, you will see “Pairing Succeeded!!!” and then “Bluetooth Connected”. E.
Page 116: Keyboard Wedge
K K DC User Manual YNCHRONIZATION Keyboard Wedge Launch Settings on the Android device. Select Language and Keyboard (or Input method). Select KTSync Keyboard. Launch the application and touch the input box to focus. The barcode will be wedged to the input box upon scanning a barcode.
Page 117: Ipad/Iphone/Ipod Touch Ktsync
K K DC User Manual YNCHRONIZATION 5.7 iPad/iPhone/iPod Touch KTSync The KTSync for iPad/iPhone/iPod touch provides limited functionality of PC KTSync for iPad, iPhone and iPod touch users. The KDC supports SPP and MFi Bluetooth profiles. The iPhone/iPad/iPod touch should use MFi Bluetooth profiles. MFi is the default profile of KDCi models.
Page 118: How To Connect And Reconnect Mfi Mode Using Up Keys
K K DC User Manual YNCHRONIZATION Synchronization - The user may configure Synchronization options, such as destination of data, data formation and delimiters. Other settings - Users may configure KDC350 GPS module, disconnection options and soft trigger button. Figure 30 - iPad/iPhone/iPod touch KTSync How to Connect and Reconnect MFi Mode using UP Keys The user needs to select the option to use this feature in the BT Config >...
Page 119: How To Use Keyboard Wedge With Iktsync
K K DC User Manual YNCHRONIZATION How to use Keyboard Wedge with iKTSync 1. Navigate to the iPhone/iPad/iPod Settings > General > Keyboard > Keyboards > Add New Keyboard... > Select the KTSync keyboard to be added. 2. Select the KTSync Keyboard > Allow Full Access.
Page 120 K K DC User Manual YNCHRONIZATION 3. Open up the application you want to scan into, and tap on the screen so the on-screen keyboard appears. Tap and hold on the globe icon located to the left of the spacebar. Select the KTSync Keyboard &...
Page 121: Blackberry Bktsync
K K DC User Manual YNCHRONIZATION 5.8 Blackberry bKTSync The bKTSync provides limited functionality of PC KTSync for Blackberry users. KDC with Bluetooth Spec2.1+EDR does not prompt Pin code entry menu. Download and install bKTSync from the Blackberry App World. http://appworld.blackberry.com/webstore/search/ktsync?lang=en Go to Blackberry Options >...
Page 122 K K DC User Manual YNCHRONIZATION Figure 31 - Blackberry bKTSync...
Page 123: Ktsync For Mac Os X
K K DC User Manual YNCHRONIZATION 5.9 KTSync for Mac OS X The KTSync Mac OS X version provides limited functionality of PC Windows KTSync for Mac OS X users. x KTSync for Mac OS X version supports both Bluetooth SPP profile and USB connection. The user should pair KDC with Mac before using the KTSync program via Bluetooth connection.
Page 124: Synchronize Button
K K DC User Manual YNCHRONIZATION Synchronize Button The user may start the synchronization process by pressing the Synchronize button. The user may select the destination of barcode data in the settings menu. There are 4 selectable destinations: File, Internal viewer, Active window, and User application. Clear Button The user may press this button to clear the KTSync internal viewer.
Page 125 K K DC User Manual YNCHRONIZATION File: The KTSync makes a file name based on 3.11 if file name is specified as an “sn_timestamp.txt”. The default directory is /Users/Shared/KTSyncData directory. The user may define another directory or another filename by clicking the “New” button. The maximum file path length is 128 characters.
Page 126 K K DC User Manual YNCHRONIZATION Serial Number When Attach serial number is enabled, this option determines when to attach serial number. “Start of record” means to attach at the front of record and “End of record” means to attach to the end of record. Data Order This option specifies the order of data (Barcode Type, Barcode Data and Timestamp) in the record.
Page 127: Application Generation
6. Application Generation KDC FW2.85 does not support the Application Generation feature. Users should upgrade FW2.85 to FW2.86 or FW3.0+ to use Application Generation feature. When you select the Application menu from the KTSync, the user may choose from the following five Applications: Generation, DB Lookup, Master/Slave, Pick/BIN, and Inventory.
Page 128: Generate Application
Figure 34 - Application Generation Menu Generate Application Generate step To generate a custom application, click on the Generate Step 1 box. This enables the user to define the user prompts and data collection settings for Step 1 of the custom application.
Page 129: Data Filter Settings
quantity field may not be adjusted. This field may be defined from “-1” to “30” seconds. “-1” second enables infinite waiting of user quantity input. Enable data filter Check this box to enable the data filtering option. Data filtering enables the user to predefine different aspects of the barcode data the user are collecting.
Page 130 The default KDC minimum barcode length defined in scan option is 4. Therefore, users should change KDC minimum barcode length to 2 or 3 to define minimum data length to 2 or 3. Maximum Data Length This field enables the user to define the maximum length of a scanned barcode. The defined length may be between 2 and 256 characters.
Page 131: Application Download And Execution
Do not Save Non-Compliant Data This field tells the KDC how to manage non-compliant data based on the defined data filtering fields. If this field is enabled, non-compliant data is NOT stored in the KDC. If this option is not enabled, non-compliant data is stored. Generate step 2 To include another step in the data collection process, click the box, Generate step 2.
Page 132: Predefined Applications
6.2 Predefined Applications KTSync provides four Predefined Applications: Master/Slave, Pick/Bin, DB Lookup and Inventory. Master/Slave Master/Slave predefined application enables you to define a master barcode for comparison with one or more slave barcodes. The predefined application may be run once or continuously. Within either setting, you may define a substring for comparison of master and slave barcodes.
Page 133 Number of ID and Symbology Define Pick ID characters from 1 to 32 and the barcode symbology. Figure 37 - Master/Slave Application Flow Chart Pick Start Position and Symbology Select numeric position of start substring character in Pick barcode from 1 to 255 and the barcode symbology.
Page 134 Select the number of characters to be compared from 0 to 255. 0 means all characters. Figure 38 - Pick/BIN Application Menu...
Page 135 Exit to KDC Menu <Up>+<Down> User ID Scan User ID Valid User ID Defined Side Key Please Store User ID scan Pick data User Input Scan button Valid Barcode Please scan Bin data Ignore Scanned Pick Label Timeout User Input Ignore Scanned Side Key Pick Label...
Page 136: Db Lookup Application
DB Lookup Application The DB Lookup application enables the user to download a database to the KDC that may then be utilized for advanced AUTO-ID applications, such as displaying additional data after scanning a barcode. For example, using our DB Lookup application, you may download a product database including information such as description, price, and stock quantity.
Page 137: Inventory Application
Comparing Barcode Length - Number of characters to be compared from 0 to 255 where 0 is all characters. Display on KDC - Define database fields to be displayed on KDC. KDC may display one to three fields. KDC will display one field in two or three lines, if same field is specified in line entering option.
Page 138: Troubleshooting
z Collect Partial Data Start Position is between 1 to 256. z Collect Partial Data Length is between 1 to 256. z Users may create an inventory database using Microsoft Excel. ¾ Excel file must be saved as .txt. ¾ Click User Inventory DB option to display inventory description. ¾...
Page 139 Move scanner farther from the barcode Incorrect angle Change the angle of scanner to barcode Symbology Contact KOAMTAC - www.KOAMTAC.com for possibility of supported custom symbology support Scan options Check scan option settings Dirty scan Clean scan window window...
Page 140: Table 6 - Troubleshooting Techniques
charge KDC Abnormal KTSync Quickset Utility Disable Quickset Utility before using Operation on KTSync. Dell Quickset utility interrupts DELL PC normal KTSync operation WSED Utility Disable WSED Wireless enable/disable utility delete the folder C:\Program Files\WSED, which contains a file WSED.exe, with the same icon as in the taskbar Delete the registry entry KEY_LOCAL_MACHINE...
Page 141: Warranty
KOAMTAC will not be liable in cases (i) in which the unit has been repaired or altered unless done or approved by KOAMTAC, (ii) in which the unit...
Page 142: Contact Information
9. Contact Information CORPORATE HEADQUARTERS 116 Village Blvd., Suite 305 Princeton, NJ 08540, USA Phone: 609-256-4700, FAX: 609-228-4373 Email: support@koamtac.com For more information, visit our website - www.koamtac.com...
Page 143: Appendix A - Barcode & Scan Options
10.1 Symbologies KOAMTAC’s KDC products support most major barcode symbologies including 1D, 2D, Postal, and OCR-Fonts. Below is the list of the barcode symbologies supported by the KDC with respect to each model’s particular area of support.
Page 144: Add-On Symbologies
& S ARCODE PTIONS EAN does not have any options. The Bookland EAN barcode does not contain any groupings – that is, there are no hyphens or separators. Thus, the ISBN 957-630-239-0 is transmitted as 9576302390. Add-on Symbologies By default, the 2 or 5 digit add-on symbols with a UPCE, UPCA, EAN-8, and EAN-13 barcode are neither decoded nor transmitted.
Page 145: Code Options (Kdc20/100/200/250/270L/410/411/415/470L)
Auto-discrimination mode should then be avoided. 10.2 Code Options (KDC20/100/200/250/270L/410/411/415/470L) The KDC supports the following barcode options: Transmission of start and stop characters Reverse direction...
Page 146: Verification Of Optional "Check Digit
& S ARCODE PTIONS Converted to No effect No effect No effect EAN8_as_EAN13 EAN-13 UPCA_as_EAN13 No effect Converted to No effect EAN-13 No effect No effect Converted to UPCE_as_EAN13 EAN-13 UPCE_as_UPCA No effect No effect Converted to UPC-A Table 10 - Symbology Conversion Verification of Optional “Check Digit”...
Page 147: Resolution Of Inconsistencies
& S ARCODE PTIONS No effect EAN13_ReturnCheckDigit effect effect effect effect EAN8_ReturnCheckDigit No effect effect effect effect effect No effect UPCA_ReturnCheckDigit effect effect effect effect UPCE_ReturnCheckDigit No effect effect effect effect effect Code39_ReturnCheckDigit effect effect effect effect effect No effect I2of5_ReturnCheckDigit effect effect...
Page 148: Miscellaneous Barcode Information
& S ARCODE PTIONS 10.3 Miscellaneous Barcode Information Height of a Linear Barcode Industry standards suggest a height of either 6.5mm or 15% of the symbol length, whichever is greater. Symbols of less than recommended heights may cause recognition problems. Check Characters Yes, we recommend the use of check-characters in barcodes.
Page 149: Data Buffer Full
& S ARCODE PTIONS Data Buffer Full When the data buffer is full, the KDC displays a message, Buffer Full, ignoring any command to scan barcodes. The user must reset the data buffer to continue data collection.
Page 150: Appendix B -Faq
K K DC User Manual 11. Appendix B –FAQ 11.1 Symbology Q: What barcode symbologies are supported by the KDC? A: The KDC20/100/200/250/270L/350L/410/411/415/470L/500L support 1D barcode only. KDC30/300/270C/350C/420/421/425/450/470C/500C support most major 1D, 2D barcode symbologies and OCR. Table 15 – Symbologies supported by KDC...
Page 151: Host Interface
Q: How many barcodes may a fully charged KDC scan? A: If the user scans a barcode every 1 seconds, KDC100/30 scans more than 12,000 barcodes, KDC20 scans more than 11,000 barcodes, KDC200 scans more than 8,500 barcodes, KDC250 scans more than 33,000 scans, KDC300 scans more than 22,000 scans and 2D models of KDC350/400/500 scan more than 40,000.
Page 152: Memory
Q: How many barcodes may be stored in the KDC? A: 4MB version of KDC100M/200M/250M/300M350 may storemaximum of 204,800 barcodes and 8MB version and KDC270/470 may store maximum of 409,600 barcodes . KDC20/30 have 150KB data memory which may store maximum 7,680 barcodes. KDC41x/42x has 80KB data memory and may store maximum 4,096 barcodes.
Page 153 K K DC User Manual ® ® ® on KOAMTAC support page. Android , iPhone/iPad/iPod touch, Blackberry , and Mac SDK are available through KOAMTAC authorized distributors.
Page 154: Appendix C - 1D Special Barcodes
K K DC User Manual PPLICATION ENERATION 12. Appendix C – 1D Special Barcodes (KDC20/20D/100/200/250/350L/350D/410/415) 12.1 Set Symbologies Enable EAN13 Disable EAN13 Enable EAN8 Disable EAN8 Enable UPCA Disable UPCA Enable UPCE Disable UPCE Enable Code39 Disable Code39 Enable ITF14...
Page 155 K K DC User Manual PPLICATION ENERATION Enable Code128 Disable Code128 Enable I2 of 5 Disable I2 of 5 Enable Codabar Disable Codabar Enable GS1-128 Disable GS1-128 Enable Code93 Disable Code93 Enable Code35 Disable Code35 Enable Bookland EAN Disable Bookland EAN Enable EAN13 with Addon Disable EAN13 with Addon...
Page 156: Barcode Options
K K DC User Manual PPLICATION ENERATION Enable EAN8 with Addon Disable EAN8 with Addon Enable UPCA with Addon Disable UPCA with Addon Enable UPCE with Addon Disable UPCE with Addon Enable GS1 Omni Disable GS1 Omni Enable GS1 Limited Disable GS1 Limited Enable GS1 Expanded Disable GS1 Expanded...
Page 157 K K DC User Manual PPLICATION ENERATION Convert UPCE to UPCA Do NOT convert UPCE to UPCA Convert EAN8 to EAN13 Do NOT convert EAN8 to EAN13 Convert UPCE to EAN13 Do NOT convert UPCE to EAN13 Return Check Digit Do NOT Return Check Digit Verify Check Digit Do NOT Verify Check Digit...
Page 158: Delete Last Scanned Barcode
K K DC User Manual PPLICATION ENERATION Return check digit for I2of5 Do NOT return check digit for I2of5 Return check digit for Code39 Do NOT return check digit for Code39 Return check digit for UPCE Do NOT return check digit for UPCE Return check digit for UPCA Do NOT return check digit for UPCA Return check digit for EAN8...
Page 159 K K DC User Manual PPLICATION ENERATION...
Page 160: Scan Options
K K DC User Manual PPLICATION ENERATION 12.4 Scan Options Wide Scan Angle* Narrow Scan Angle* Normal Filter Mode* High Filter Mode* Enable Auto Trigger Disable Auto Trigger Reread Delay = Continuous Reread Delay = Short Reread Delay = Medium Reread Delay = Long Reread Delay = Extra Long *Opticon laser only...
Page 161: Minimum Barcode Length
K K DC User Manual PPLICATION ENERATION Scan Timeout = 2sec Scan Timeout = 3sec Scan Timeout = 4sec Scan Timeout = 5sec Scan Timeout = 6sec Scan Timeout = 7sec Scan Timeout = 9sec Scan Timeout = 8sec Scan Timeout = 10sec 12.6 Minimum Barcode Length Minimum Length = 2 Minimum Length = 3...
Page 162 K K DC User Manual PPLICATION ENERATION Minimum Length = 6 Minimum Length = 7 Minimum Length = 8 Minimum Length = 9 Minimum Length = 10 Minimum Length = 11 Minimum Length = 12 Minimum Length = 13 Minimum Length = 14 Minimum Length = 15 Minimum Length = 16 Minimum Length = 17...
Page 163 K K DC User Manual PPLICATION ENERATION Minimum Length = 22 Minimum Length = 23 Minimum Length = 24 Minimum Length = 25 Minimum Length = 26 Minimum Length = 27 Minimum Length = 28 Minimum Length = 29 Minimum Length = 30 Minimum Length = 31 Minimum Length = 32 Minimum Length = 33...
Page 164: Scanifconnect
K K DC User Manual PPLICATION ENERATION 12.7 ScanIfConnect ScanIfConnect = Enable ScanIfConnect = Disable...
Page 165: Security Level(Laser Model Only)
K K DC User Manual PPLICATION ENERATION 12.8 Security Level(Laser model only) Security level = 1 Security level = 2 Security level = 3 Security level = 4...
Page 166: Data Process - Wedge/Store, Enter Key & Extend Key
K K DC User Manual PPLICATION ENERATION 12.9 Data Process - Wedge/Store, Enter Key & Extend Key Wedge Only Wedge & Store Always Store Only Save if Sent Save if Not Sent Enable Enter Key (KDC350L/D Only) Disable Enter Key (KDC350L/D Only) Enable Extend Key (KDC350L/D Only) Disable Extend Key (KDC350L/D Only)
Page 167: Data Process - Data Edit
K K DC User Manual PPLICATION ENERATION 12.10 Data Process - Data Edit Start Prefix Enter Start Suffix Enter Finish Prefix/Suffix Enter Cancel Prefix/Suffix Enter Delete Prefix Delete Suffix Display Prefix Display Suffix AIM ID None AIM ID In Prefix AIM ID In Suffix...
Page 168: Data Process - Data Format & Handshake
K K DC User Manual 1D S PECIAL ARCODES 12.10 Data Process - Data Format & Handshake Data format = Barcode only Data format = Packet data Enable Handshake Disable Handshake...
Page 169: Data Process - Termination Character & Duplicate Check
K K DC User Manual 1D S PECIAL ARCODES 12.11 Data Process - Termination Character & Duplicate Check Termination Character = None Termination Character = CR Termination Character = LF Termination Character = CR+LF Termination Character = Tab Enable Duplicate Check Disable Duplicate Check...
Page 170: Bluetooth
K K DC User Manual 1D S PECIAL ARCODES 12.11 Bluetooth Enable Bluetooth Power Disable Bluetooth Power Enter Pairing Mode Enable Discovering Disable Discovering Connect To Last Connecting to Disconnect HID Sync SPP Sync Bluetooth Profile = SPP Bluetooth Profile = HID iOS...
Page 171 K K DC User Manual 1D S PECIAL ARCODES Bluetooth Profile = MFi Bluetooth Profile = SPP2.0 Bluetooth Profile = HID Normal Enable Auto Connect Disable Auto Connect Enable Auto Reconnect Disable Auto Reconnect Enable Auto Power On Disable Auto Power On Enable Auto Power Off Disable Auto Power Off Enable Beep Warning...
Page 172 K K DC User Manual 1D S PECIAL ARCODES Display BT MAC Address Display BT FW Version Enable Wakeup Nulls Disable Wakeup Nulls Enable BT Toggle Disable BT Toggle Enable BT Disconnect Button Disable BT Disconnect Button Enable Auto Pairing Disable Auto Pairing...
Page 173: Bluetooth Auto Power On Time
K K DC User Manual 1D S PECIAL ARCODES 12.12 Bluetooth Auto Power On Time Auto Power On Time = Disabled Auto Power On Time = 1sec Auto Power On Time = 2sec Auto Power On Time = 3sec Auto Power On Time = 4sec Auto Power On Time = 5sec Auto Power On Time = 6sec Auto Power On Time = 7sec...
Page 174: Bluetooth Power Off Time
K K DC User Manual 1D S PECIAL ARCODES 12.13 Bluetooth Power Off Time BT Power Off Time = 1min BT Power Off Time = 2min BT Power Off Time = 3min BT Power Off Time = 4min BT Power Off Time = 5min BT Power Off Time = 6min BT Power Off Time = 7min BT Power Off Time = 8min...
Page 175 K K DC User Manual 1D S PECIAL ARCODES BT Power Off Time = 15min BT Power Off Time = 16min BT Power Off Time = 17min BT Power Off Time = 18min BT Power Off Time = 19min BT Power Off Time = 20min BT Power Off Time = 21min BT Power Off Time = 22min BT Power Off Time = 23min...
Page 176: Hid Auto Lock Time
K K DC User Manual 1D S PECIAL ARCODES 12.14 HID Auto Lock Time HID Auto Lock Time = 0min (Never) HID Auto Lock Time = 1min HID Auto Lock Time = 2min HID Auto Lock Time = 3min HID Auto Lock Time = 4min HID Auto Lock Time = 5min HID Auto Lock Time = 10min HID Auto Lock Time = 15min...
Page 177: Hid Keyboard
K K DC User Manual 1D S PECIAL ARCODES 12.15 HID Keyboard HID Keyboard = US HID Keyboard = German HID Keyboard = French HID Keyboard = Italian HID Keyboard = Spanish...
Page 178: Hid Initial Delay
K K DC User Manual 1D S PECIAL ARCODES 12.16 HID Initial Delay HID Initial Delay = Disabled HID Initial Delay = 1second HID Initial Delay = 2seconds HID Initial Delay = 3seconds HID Initial Delay = 5seconds HID Initial Delay = 10seconds...
Page 179: Hid Character Delay
K K DC User Manual 1D S PECIAL ARCODES 12.17 HID Character Delay HID Character Delay = Disabled HID Character Delay = 10msec HID Character Delay = 20msec HID Character Delay = 30msec HID Character Delay = 50msec HID Character Delay = 100msec...
Page 180: Hid Control Character
K K DC User Manual 1D S PECIAL ARCODES 12.18 HID Control Character HID Control Character = Disabled HID Control Character = Alt+Numpad HID Control Character = ^+Character HID Control Character = Replace with ‘|’...
Page 181: System
K K DC User Manual 1D S PECIAL ARCODES 12.19 System Note1,2 Note1,2 Memory Size = 0.5M / 3.5M Memory Size = 1M / 3M Note1,2 Note1,2 Memory Size = 2M / 2M Memory Size = 3M / 1M Note1,2 Note1,2 Memory Size = 4M / 0M Confirm Memory Size Change...
Page 182 K K DC User Manual 1D S PECIAL ARCODES Reset BT Registry Enable Auto Erase Disable Auto Erase Date/Time Battery Display Version Lock Button Unlock Button Enable Beep Sound Disable Beep Sound High Beep Volume Low Beep Volume Enable Auto Menu Exit Disable Auto Menu Exit...
Page 183 K K DC User Manual 1D S PECIAL ARCODES Enable MFi Mode Disable MFi Mode Enable Vibrator Disable Vibrator Scan Success = No vibration Scan Success = 1 vibration Scan Success = 2 vibrations Scan Success = 3 vibrations Scan Success = 4 vibrations Scan Success = 5 vibrations Scan Failure = No vibration Scan Failure = 1 vibration...
Page 184 Display Format = Type & Battery Display Format = Memory Status Display Format = GPS Data (GPS Model) Display Format = Barcode Only Display Format = Graphic Enable Scrolling Disable Scrolling Factory Default KDC Reset Disable Backup Battery (KDC20/20D Only) Enable Backup Battery (KDC20/20D Only)
Page 185: Sleep Timeout
K K DC User Manual 1D S PECIAL ARCODES 12.20 Sleep Timeout Sleep Timeout = Disable Sleep Timeout = 1sec Sleep Timeout = 2sec Sleep Timeout = 3sec Sleep Timeout = 4sec Sleep Timeout = 5sec Sleep Timeout = 10sec Sleep Timeout = 20sec Sleep Timeout = 30sec Sleep Timeout = 1min...
Page 186: Etc
K K DC User Manual 1D S PECIAL ARCODES 12.21 Enable Reverse Direction Disable Reverse Direction Enable Verify check digit Disable Verify check digit Enable Return check digit Disable Return check digit...
Page 187: Function
K K DC User Manual 1D S PECIAL ARCODES 12.22 Function 12.23 Number...
Page 188 K K DC User Manual 1D S PECIAL ARCODES...
Page 189: Lower Case Alphabet
K K DC User Manual 1D S PECIAL ARCODES 12.24 Lower Case Alphabet...
Page 190 K K DC User Manual 1D S PECIAL ARCODES...
Page 191: Upper Case Alphabet
K K DC User Manual 1D S PECIAL ARCODES 12.25 Upper Case Alphabet...
Page 192 K K DC User Manual 1D S PECIAL ARCODES...
Page 193: Control Character
K K DC User Manual 1D S PECIAL ARCODES 12.26 Control Character Space Shift + Tab...
Page 194: Symbol Character
K K DC User Manual 1D S PECIAL ARCODES 12.27 Symbol Character “ & ‘...
Page 195 K K DC User Manual 1D S PECIAL ARCODES < >...
Page 196 K K DC User Manual 1D S PECIAL ARCODES Start String Stop String The user may compose a string up to 16 characters. A string would be composed by scanning the “Start-String”, number/alphabet/special characters, and “Stop-String” special barcodes. The KDC will abort string composition if the user do not scan “Stop-String”...
Page 197: Gps (Gps Model Only)
K K DC User Manual 1D S PECIAL ARCODES 12.28 GPS (GPS Model Only) Disable GPS Power Enable GPS Power Enable GPS Bypass Data Disable GPS Bypass Data Reset GPS Module GPS Acquire Test GPS Power Save Mode = Normal GPS Power Save Mode = Power Saving Enable GPS Auto Power Off Disable GPS Auto Power Off...
Page 198: Gps/Bt Auto Power Off Timeout
K K DC User Manual 1D S PECIAL ARCODES 12.29 GPS/BT Auto Power Off Timeout Auto Power Off = 0min (Disabled) Auto Power Off = 5min Auto Power Off = 10min Auto Power Off = 20min Auto Power Off = 30min Auto Power Off = 60min Auto Power Off = 120min...
Page 199: Nfc (Nfc Model Only)
K K DC User Manual 1D S PECIAL ARCODES 12.30 NFC (NFC Model Only) Enable NFC Power Disable NFC Power NFC Data Format = Data only NFC Data Format = Packet data UID Only = Enable UID Only = Disable New Data Format = Enable New Data Format = Disable...
Page 200: Usb Disk (M Model Only)
Format USB Disk USB HID Mode Data Format = Data Data Format = Data, Time Data Format = Data, Type Data Format = Data, Time, Type 12.32 USB DM Button(KDC20/20D Only) USB DM Button = Enable USB DM Button = Disable...
Page 201: Wifi (Wifi Model Only)
K K DC User Manual 1D S PECIAL ARCODES 12.33 WIFI (WIFI Model Only) Enable WIFI Power Disable WIFI Power Provisioning Protocol = UDP Protocol = TCP Protocol = HTTP_GET Protocol = HTTP_POST Server URL Port Number Server Page Enable SSL Disable SSL Enable AutoConnect Disable AutoConnect...
Page 202: Multilanguage
K K DC User Manual 1D S PECIAL ARCODES AP SSID AP Passcode Connect Server IP Enable Send Stored Disable Send Stored 12.34 Multilanguage Disable(English Only) English French Italian Spanish Korean Japanese...
Page 203: Appendix D - 2D Special Barcodes (Kdc30/300/350C/350Wa/420/425/450)
K K DC User Manual 2D S PECIAL ARCODES Appendix D – 2D Special Barcodes (KDC30/300/350C/350WA/420/425/450) 13.1 Set Symbologies ® For KDC300/350C/420/425/450, please refer to Honeywell Adaptus Technology enabled scanner user manual, such as 4600 or 4820. 13.2 Barcode Options ®...
Page 204: Scan Options
K K DC User Manual 2D S PECIAL ARCODES 13.4 Scan Options Enable Auto Trigger Disable Auto Trigger Reread Delay = Continuous Reread Delay = Short Reread Delay = Medium Reread Delay = Long Reread Delay = Extra Long...
Page 205: Scan Timeout
K K DC User Manual 2D S PECIAL ARCODES 13.5 Scan Timeout Scan Timeout = 500msec Scan Timeout = 1sec Scan Timeout = 2sec Scan Timeout = 3sec Scan Timeout = 4sec Scan Timeout = 5sec Scan Timeout = 6sec Scan Timeout = 7sec Scan Timeout = 8sec Scan Timeout = 9sec...
Page 206: Minimum Barcode Length (Except Kdc30)
K K DC User Manual 2D S PECIAL ARCODES 13.6 Minimum Barcode Length (except KDC30) Minimum Length = 2 Minimum Length = 3 Minimum Length = 4 Minimum Length = 5 Minimum Length = 6 Minimum Length = 7 Minimum Length = 8 Minimum Length = 9 Minimum Length = 10 Minimum Length = 11...
Page 207 K K DC User Manual 2D S PECIAL ARCODES Minimum Length = 16 Minimum Length = 17 Minimum Length = 18 Minimum Length = 19 Minimum Length = 20 Minimum Length = 21 Minimum Length = 22 Minimum Length = 23 Minimum Length = 24 Minimum Length = 25 Minimum Length = 26...
Page 208 K K DC User Manual 2D S PECIAL ARCODES Minimum Length = 32 Minimum Length = 33 Minimum Length = 34 Minimum Length = 35 Minimum Length = 36...
Page 209: Image Capture (Except Kdc30)
K K DC User Manual 2D S PECIAL ARCODES 13.7 Image Capture (except KDC30) Capture Now Enable Image Capture Image Format = JPEG Image Format = BMP Pixel Depth = 1 bit per pixel Pixel Depth = 8 bit per pixel 13.8 ScanIfConnect ScanIfConnect = Enable ScanIfConnect = Disable...
Page 210: Data Process - Wedge/Store, Enter Key & Extend Key
K K DC User Manual 2D S PECIAL ARCODES 13.9 Data Process - Wedge/Store, Enter Key & Extend Key Wedge Only Wedge & Store Always Store Only Save if Sent Save if Not Sent Enable Enter Key (KDC350C Only) Disable Enter Key (KDC350C Only) Enable Extend Key (KDC350C Only) Disable Extend Key (KDC350C Only) Enable Age Verification...
Page 211: Data Process - Data Edit
K K DC User Manual 2D S PECIAL ARCODES 13.10 Data Process - Data Edit Start Prefix Enter Start Suffix Enter Finish Prefix / Suffix Enter Cancel Prefix / Suffix Enter Delete Prefix Delete Suffix Display Prefix Display Suffix AIM ID None AIM ID In Prefix AIM ID In Suffix...
Page 212: Data Process - Data Format & Handshake
K K DC User Manual 2D S PECIAL ARCODES 13.11 Data Process – Data Format & Handshake Data format = Barcode only Data format = Packet data Enable Handshake Disable Handshake...
Page 213: Data Process - Termination Character & Duplicate Check
K K DC User Manual 2D S PECIAL ARCODES 13.12 Data Process - Termination Character & Duplicate Check Termination Character = None Termination Character = CR Termination Character = LF Termination Character = CR+LF Termination Character = Tab Enable Duplicate Check Disable Duplicate Check...
Page 214: Bluetooth
K K DC User Manual 2D S PECIAL ARCODES 13.13 Bluetooth Enable Bluetooth Power Disable Bluetooth Power Enter Pairing Mode Enable Discovering Disable Discovering Connect To Connect To Last Disconnect HID Sync SPP Sync Bluetooth Profile = SPP Bluetooth Profile = HID iOS...
Page 215 K K DC User Manual 2D S PECIAL ARCODES Bluetooth Profile = MFi Bluetooth Profile = SPP2.0 Bluetooth Profile = HID Normal Enable Auto Connect Disable Auto Connect Enable Auto Reconnect Disable Auto Reconnect Enable Auto Power Off Disable Auto Power Off Enable Auto Power On Disable Auto Power On Enable Beep Warning...
Page 216 K K DC User Manual 2D S PECIAL ARCODES Display BT Mac Address Display BT FW Version Enable Wakeup Nulls Disable Wakeup Nulls Enable BT Toggle Disable BT Toggle Enable BT Disconnect Button Disable BT Disconnect Button Enable Auto Pairing Disable Auto Pairing...
Page 217: Bluetooth Auto Power On Time
K K DC User Manual 2D S PECIAL ARCODES 13.14 Bluetooth Auto Power On Time Auto Power On Time = Disabled Auto Power On Time = 1sec Auto Power On Time = 2sec Auto Power On Time = 3sec Auto Power On Time = 4sec Auto Power On Time = 5sec Auto Power On Time = 6sec Auto Power On Time = 7sec...
Page 218: Bluetooth Power Off Time
K K DC User Manual 2D S PECIAL ARCODES 13.15 Bluetooth Power Off Time BT Power Off Time = 1min BT Power Off Time = 2min BT Power Off Time = 3min BT Power Off Time = 4min BT Power Off Time = 5min BT Power Off Time = 6min BT Power Off Time = 7min BT Power Off Time = 8min...
Page 219 K K DC User Manual 2D S PECIAL ARCODES BT Power Off Time = 15min BT Power Off Time = 16min BT Power Off Time = 17min BT Power Off Time = 18min BT Power Off Time = 19min BT Power Off Time = 20min BT Power Off Time = 21min BT Power Off Time = 22min BT Power Off Time = 23min...
Page 220: Hid Auto Lock Time
K K DC User Manual 2D S PECIAL ARCODES 13.16 HID Auto Lock Time HID Auto Lock Time = 0min (Never) HID Auto Lock Time = 1min HID Auto Lock Time = 2min HID Auto Lock Time = 3min HID Auto Lock Time = 4min HID Auto Lock Time = 5min HID Auto Lock Time = 10min HID Auto Lock Time = 15min...
Page 221: Hid Keyboard
K K DC User Manual 2D S PECIAL ARCODES 13.17 HID Keyboard HID Keyboard = US HID Keyboard = German HID Keyboard = French HID Keyboard = Italian HID Keyboard = Spanish...
Page 222: Hid Initial Delay
K K DC User Manual 2D S PECIAL ARCODES 13.18 HID Initial Delay HID Initial Delay = Disabled HID Initial Delay = 1second HID Initial Delay = 2seconds HID Initial Delay = 3seconds HID Initial Delay = 5seconds HID Initial Delay = 10seconds...
Page 223: Hid Character Delay
K K DC User Manual 2D S PECIAL ARCODES 13.19 HID Character Delay HID Character Delay = Disabled HID Character Delay = 10msec HID Character Delay = 20msec HID Character Delay = 30msec HID Character Delay = 50msec HID Character Delay = 100msec...
Page 224: Hid Control Character
K K DC User Manual 2D S PECIAL ARCODES 13.20 HID Control Character HID Control Character = Disabled HID Control Character = Alt+Numpad HID Control Character = ^+Character HID Control Character = Replace with ‘|’...
Page 225: System
K K DC User Manual 2D S PECIAL ARCODES 13.21 System Note1,2 Note1,2 Memory Size = 0.5M / 3.5M Memory Size = 1M / 3M Note1,2 Note1,2 Memory Size = 2M / 2M Memory Size = 3M / 1M Note1,2 Note1,2 Memory Size = 4M / 0M Confirm memory size...
Page 226 K K DC User Manual 2D S PECIAL ARCODES Reset BT Registry Enable Auto Erase Disable Auto Erase Date/Time Battery Display Version Lock Button Unlock Button Enable Beep Sound Disable Beep Sound High Beep Volume Low Beep Volume Enable MFi Mode Disable MFi Mode...
Page 227 K K DC User Manual 2D S PECIAL ARCODES Enable Vibrator Disable Vibrator Scan Success = No vibration Scan Success = 1 vibration Scan Success = 2 vibrations Scan Success = 3 vibrations Scan Success = 4 vibrations Scan Success = 5 vibrations Scan Failure = No vibration Scan Failure = 1 vibration Scan Failure = 2 vibrations...
Page 228 K K DC User Manual 2D S PECIAL ARCODES Enable Port Status Disable Port Status Display Format = Time & Battery Display Format = Type & Time Display Format = Type & Battery Display Format = Memory Status Display Format = Barcode Only Display Format = GPS Data(GPS Model) Display Format = Graphic Enable Menu Barcode...
Page 229: Sleep Timeout
K K DC User Manual 2D S PECIAL ARCODES 13.22 Sleep Timeout Sleep Timeout = Disable Sleep Timeout = 1sec Sleep Timeout = 2sec Sleep Timeout = 3sec Sleep Timeout = 4sec Sleep Timeout = 5sec Sleep Timeout = 10sec Sleep Timeout = 20sec Sleep Timeout = 30sec Sleep Timeout = 1min...
Page 230: Function
K K DC User Manual 2D S PECIAL ARCODES 13.23 Function...
Page 231: Number
K K DC User Manual 2D S PECIAL ARCODES 13.24 Number...
Page 232: Lower Case Alphabet
K K DC User Manual 2D S PECIAL ARCODES 13.25 Lower Case Alphabet...
Page 233 K K DC User Manual 2D S PECIAL ARCODES...
Page 234: Upper Case Alphabet
K K DC User Manual 2D S PECIAL ARCODES 13.26 Upper Case Alphabet...
Page 235 K K DC User Manual 2D S PECIAL ARCODES...
Page 236: Control Character
K K DC User Manual 2D S PECIAL ARCODES 13.27 Control Character Space Shift + Tab...
Page 237: Symbol Character
K K DC User Manual 2D S PECIAL ARCODES 13.28 Symbol Character “ & ‘...
Page 238 K K DC User Manual 2D S PECIAL ARCODES < >...
Page 239 K K DC User Manual 2D S PECIAL ARCODES Stop String Start String The user may compose a string up to 16 characters. A string would be composed by scanning the “Start-String”, number/alphabet/special characters, and “Stop-String” special barcodes. The KDC will abort string composition if the user do not scan “Stop-String”...
Page 240: Gps (Gps Model Only)
K K DC User Manual 2D S PECIAL ARCODES 13.29 GPS (GPS Model Only) Enable GPS Power Disable GPS Power Enable GPS Bypass Data Disable GPS Bypass Data Reset GPS Module GPS Acquire Test GPS Power Save Mode = Power Saving GPS Power Save Mode = Normal Enable GPS Auto Power Off Disable GPS Auto Power Off...
Page 241: Gps/Bt Auto Power Off Timeout
K K DC User Manual 2D S PECIAL ARCODES 13.30 GPS/BT Auto Power Off Timeout Auto Power Off = 0min (Disabled) Auto Power Off = 5min Auto Power Off = 10min Auto Power Off = 20min Auto Power Off = 30min Auto Power Off = 60min Auto Power Off = 120min...
Page 242: Nfc (Nfc Model Only)
K K DC User Manual 2D S PECIAL ARCODES 13.31 NFC (NFC Model Only) Enable NFC Power Disable NFC Power NFC Data Format = Data only NFC Data Format = Packet data UID Only = Enable UID Only = Disable New Data Format = Enable New Data Format = Disable 13.32...
Page 243 K K DC User Manual 2D S PECIAL ARCODES Power On Time = 1.5 sec Power On Time = 2 sec Power On Time = 2.5 sec Power On Time = 3 sec Power On Time = 3.5 sec Power On Time = 4 sec Power On Time = 4.5 sec Power On Time = 5 sec Power Off Time = 500ms...
Page 244 K K DC User Manual 2D S PECIAL ARCODES Power Off Time = 4.5 sec Power Off Time = 5 sec Power Level = 0 Power Level = 1 Power Level = 2 Power Level = 3 Power Level = 4 Power Level = 5 Power Level = 6 Power Level = 7...
Page 245: Usb Disk (M Model Only)
K K DC User Manual 2D S PECIAL ARCODES 13.33 USB Disk (M Model Only) USB Serial Mode USB Disk Mode USB HID Mode Format USB Disk Data Format = Data Data Format = Data,Time Data Format = Data,Type Data Format = Data,Time,Type 13.34 USB DM Button(KDC30 only) USB DM Button = Enable...
Page 246: Wifi (Wifi Model Only)
K K DC User Manual 2D S PECIAL ARCODES 13.35 WIFI (WIFI Model Only) Enable WIFI Power Disable WIFI Power Provisioning Protocol = UDP Protocol = TCP Protocol = HTTP_GET Protocol = HTTP_POST Server URL Port Number Server Page Enable SSL Disable SSL Enable AutoConnect Disable AutoConnect...
Page 247 K K DC User Manual 2D S PECIAL ARCODES AP SSID AP Passcode Connect Server IP Enable Send Stored Disable Send Stored...
Page 248: Cdma (Kdc350Wa Cdma Model Only)
K K DC User Manual 2D S PECIAL ARCODES 13.36 CDMA (KDC350WA CDMA Model Only) Enable CDMA Power Disable CDMA Power...
Page 249: Multilanguage
K K DC User Manual ULTIPLE PECIAL ARCODES 13.37 Multilanguage Disable(English Only) English French Italian Spanish Korean Japanese...
Page 250: Appendix E - Msr Special Barcodes (Kdc415/425Msr)
K K DC User Manual ULTIPLE PECIAL ARCODES 14. APPENDIX E - MSR Special Barcodes (KDC415/425MSR) 14.1 KDC415MSR Beep On Error No Beep On Error Beep On Error Data Format MSR Data Only Packet data Encrypt Mode Disabled Enable Track Enable Track1 Enable Track2 Enable Track3...
Page 251 K K DC User Manual ULTIPLE PECIAL ARCODES Disable Track Disable Track1 Disable Track2 Disable Track3 Track Separator Track Separator = None Track Separator = Space Track Separator = Comma Track Separator = Semi Colon Track Separator = CR Track Separator = LF Track Separator = CR+LF Track Separator = Tab AES Key Length...
Page 252 K K DC User Manual ULTIPLE PECIAL ARCODES AES Key Length = 256 bits MSR Card Type MSR Card Type = ISO MSR Card Type = Other 1 MSR Card Type = AAMVA...
Page 253: Kdc425Msr
K K DC User Manual ULTIPLE PECIAL ARCODES 14.2 KDC425MSR Beep On Error No Beep On Error Beep On Error Data Format MSR Data Only Packet data Encrypt Mode Disabled Enable Track Enable Track1 Enable Track2 Enable Track3 Disable Track...
Page 254 K K DC User Manual ULTIPLE PECIAL ARCODES Disable Track1 Disable Track2 Disable Track3 Track Separator Track Separator = None Track Separator = Space Track Separator = Comma Track Separator = Semi Colon Track Separator = CR Track Separator = LF Track Separator = CR+LF Track Separator = Tab AES Key Length...
Page 255 K K DC User Manual ULTIPLE PECIAL ARCODES AES Key Length = 128 bits AES Key Length = 192 bits AES Key Length = 256 bits MSR Card Type MSR Card Type = ISO MSR Card Type = Other 1 MSR Card Type = AAMVA...
Page 256: Appendix F - 1D Special Barcodes (500D)
K K DC User Manual ULTIPLE PECIAL ARCODES 15. Appendix F – 1D Special Barcodes (500D) 15.1 Set Symbologies Enable EAN13 Disable EAN13 Enable EAN8 Disable EAN8 Enable UPCA Disable UPCA Enable UPCE Disable UPCE Enable Code39 Disable Code39 Enable ITF14 Disable ITF14...
Page 257 K K DC User Manual ULTIPLE PECIAL ARCODES Enable Code128 Disable Code128 Enable I2 of 5 Disable I2 of 5 Enable Codabar Disable Codabar Enable GS1-128 Disable GS1-128 Enable Code93 Disable Code93 Enable Code35 Disable Code35 Enable Bookland EAN Disable Bookland EAN Enable EAN13 with Addon Disable EAN13 with Addon...
Page 258 K K DC User Manual ULTIPLE PECIAL ARCODES Enable EAN8 with Addon Disable EAN8 with Addon Enable UPCA with Addon Disable UPCA with Addon Enable UPCE with Addon Disable UPCE with Addon Enable GS1 Omni Disable GS1 Omni Enable GS1 Limited Disable GS1 Limited Enable GS1 Expanded Disable GS1 Expanded...
Page 259: Barcode Options
K K DC User Manual ULTIPLE PECIAL ARCODES 15.2 Barcode Options Codabar - do NOT transmit start/stop Codabar - transmit start/stop Convert UPCE to UPCA Do NOT convert UPCE to UPCA Convert EAN8 to EAN13 Do NOT convert EAN8 to EAN13 Convert UPCE to EAN13 Do NOT convert UPCE to EAN13 Return Check Digit...
Page 260 K K DC User Manual ULTIPLE PECIAL ARCODES Verify check digit for I2of5 Do NOT verify check digit for I2of5 Verify check digit for Code39 Do NOT verify check digit for Code39 Return check digit for I2of5 Do NOT return check digit for I2of5 Return check digit for Code39 Do NOT return check digit for Code39 Return check digit for UPCE...
Page 261: Delete Last Scanned Barcode
K K DC User Manual ULTIPLE PECIAL ARCODES 15.3 Delete Last Scanned Barcode Delete Last Scanned Barcode...
Page 262: Scan Options
K K DC User Manual ULTIPLE PECIAL ARCODES 15.4 Scan Options Enable Auto Trigger Disable Auto Trigger Reread Delay = Continuous Reread Delay = Short Reread Delay = Medium Reread Delay = Long Reread Delay = Extra Long 15.5 Scan Timeout Scan Timeout = 500msec Scan Timeout = 1sec Scan Timeout = 2sec...
Page 263: Minimum Barcode Length
K K DC User Manual ULTIPLE PECIAL ARCODES Scan Timeout = 4sec Scan Timeout = 5sec Scan Timeout = 6sec Scan Timeout = 7sec Scan Timeout = 9sec Scan Timeout = 8sec Scan Timeout = 10sec 15.6 Minimum Barcode Length Minimum Length = 2 Minimum Length = 3 Minimum Length = 4...
Page 264 K K DC User Manual ULTIPLE PECIAL ARCODES Minimum Length = 8 Minimum Length = 9 Minimum Length = 10 Minimum Length = 11 Minimum Length = 12 Minimum Length = 13 Minimum Length = 14 Minimum Length = 15 Minimum Length = 16 Minimum Length = 17 Minimum Length = 18...
Page 265 K K DC User Manual ULTIPLE PECIAL ARCODES Minimum Length = 24 Minimum Length = 25 Minimum Length = 26 Minimum Length = 27 Minimum Length = 28 Minimum Length = 29 Minimum Length = 30 Minimum Length = 31 Minimum Length = 32 Minimum Length = 33 Minimum Length = 34...
Page 266: Scanifconnect
K K DC User Manual ULTIPLE PECIAL ARCODES 15.7 ScanIfConnect ScanIfConnect = Enable ScanIfConnect = Disable...
Page 267: Data Process - Wedge/Store, Enter Key & Extend Key
K K DC User Manual ULTIPLE PECIAL ARCODES 15.8 Data Process - Wedge/Store, Enter Key & Extend Wedge Only Wedge & Store Always Store Only Save if Sent Save if Not Sent Enable Enter Key Disable Enter Key Enable Extend Key Disable Extend Key 15.9 Data Process - Data Edit Start Prefix Enter...
Page 268: Data Process - Data Format
K K DC User Manual ULTIPLE PECIAL ARCODES Finish Prefix/Suffix Enter Cancel Prefix/Suffix Enter Delete Prefix Delete Suffix Display Prefix Display Suffix AIM ID None AIM ID In Prefix AIM ID In Suffix 15.10 Data Process - Data Format Data format = Barcode only Data format = Packet data...
Page 269: Data Process - Termination Character & Duplicate Check
K K DC User Manual ULTIPLE PECIAL ARCODES 15.11 Data Process - Termination Character & Duplicate Check Termination Character = None Termination Character = CR Termination Character = LF Termination Character = CR+LF Termination Character = Tab Enable Duplicate Check Disable Duplicate Check...
Page 270: Bluetooth
K K DC User Manual ULTIPLE PECIAL ARCODES 15.12 Bluetooth Enable Bluetooth Power Disable Bluetooth Power Enter Pairing Mode Disconnect Enable Auto Pairing Disable Auto Pairing Bluetooth Profile = SPP Bluetooth Profile = MFi Enable Auto Reconnect Disable Auto Reconnect Display BT MAC Address Display BT FW Version...
Page 271: System
K K DC User Manual ULTIPLE PECIAL ARCODES 15.13 System Memory Status Reset Memory Enable Auto Erase Disable Auto Erase Battery Display Version Serial Number Enable Beep Sound Disable Beep Sound Enable Power On Beep Disable Power On Beep Enable BeepOnConnect Disable BeepOnConnect...
Page 272 K K DC User Manual ULTIPLE PECIAL ARCODES Enable Beep On Scan Disable Beep On Scan Enable BeepOnMSCard Disable BeepOnMSCard Enable BeepOnICCard Disable BeepOnICCard Enable BeepOnNFCCard Disable BeepOnNFCCard High Beep Volume Low Beep Volume Enable Auto Menu Exit Disable Auto Menu Exit Enable Port Status Disable Port Status Display Format = Time &...
Page 273 K K DC User Manual ULTIPLE PECIAL ARCODES Display Format = Type & Battery Display Format = Memory Status Display Format = Barcode Only Factory Default KDC Reset...
Page 274: Sleep Timeout
K K DC User Manual ULTIPLE PECIAL ARCODES 15.14 Sleep Timeout Sleep Timeout = Disable Sleep Timeout = 5sec Sleep Timeout = 10sec Sleep Timeout = 20sec Sleep Timeout = 30sec Sleep Timeout = 1min Sleep Timeout = 2min Sleep Timeout = 5min Sleep Timeout = 10min...
Page 275: Nfc
K K DC User Manual ULTIPLE PECIAL ARCODES 15.15 Enable NFC Power Disable NFC Power 15.16 Enable MSR Power Disable MSR Power No Beep On Error Beep On Error Enable Use Track1 Disable Use Track1 Enable Use Track2 Disable Use Track2 Enable Use Track3 Disable Use Track3...
Page 276 K K DC User Manual ULTIPLE PECIAL ARCODES Enable Null Check Track1 Disable Null Check Track1 Enable Null Check Track2 Disable Null Check Track2 Enable Null Check Track3 Disable Null Check Track3 Enable Attach SS/ES Disable Attach SS/ES MSR Card Type = ISO MSR Card Type = Other 1 MSR Card Type = AAMVA MSR Card Type = JIS 2...
Page 277: Iccr(Ic Card Reader)
K K DC User Manual ULTIPLE PECIAL ARCODES 15.17 ICCR(IC CARD READER) Enable ICCR Power Disable ICCR Power IFD Number Config Number 15.18 Key Management Stored Keys Inject Keys 15.19 Multilanguage English Korean Japanese...
Page 278 K K DC User Manual ULTIPLE PECIAL ARCODES...
Page 279: Appendix G - 2D Special Barcodes (Kdc500C)
K K DC User Manual ULTIPLE PECIAL ARCODES 16. Appendix G – 2D Special Barcodes (KDC500C) 16.1 Set Symbologies ® For KDC500C, please refer to Honeywell Adaptus Technology enabled scanner user manual, such as 5600. 16.2 Barcode Options ® For KDC500C, please refer to Honeywell Adaptus Technology enabled scanner user manual, such as 5600.
Page 280: Scan Options
K K DC User Manual ULTIPLE PECIAL ARCODES 16.4 Scan Options Enable Auto Trigger Disable Auto Trigger Reread Delay = Continuous Reread Delay = Short Reread Delay = Medium Reread Delay = Long Reread Delay = Extra Long...
Page 281: Scan Timeout
K K DC User Manual ULTIPLE PECIAL ARCODES 16.5 Scan Timeout Scan Timeout = 500msec Scan Timeout = 1sec Scan Timeout = 2sec Scan Timeout = 3sec Scan Timeout = 4sec Scan Timeout = 5sec Scan Timeout = 6sec Scan Timeout = 7sec Scan Timeout = 8sec Scan Timeout = 9sec Scan Timeout = 10sec...
Page 282: Minimum Barcode Length
K K DC User Manual ULTIPLE PECIAL ARCODES 16.6 Minimum Barcode Length Minimum Length = 2 Minimum Length = 3 Minimum Length = 4 Minimum Length = 5 Minimum Length = 6 Minimum Length = 7 Minimum Length = 8 Minimum Length = 9 Minimum Length = 10 Minimum Length = 11...
Page 283 K K DC User Manual ULTIPLE PECIAL ARCODES Minimum Length = 16 Minimum Length = 17 Minimum Length = 18 Minimum Length = 19 Minimum Length = 20 Minimum Length = 21 Minimum Length = 22 Minimum Length = 23 Minimum Length = 24 Minimum Length = 25 Minimum Length = 26...
Page 284 K K DC User Manual ULTIPLE PECIAL ARCODES Minimum Length = 32 Minimum Length = 33 Minimum Length = 34 Minimum Length = 35 Minimum Length = 36...
Page 285: Scanifconnect
K K DC User Manual ULTIPLE PECIAL ARCODES 16.7 ScanIfConnect ScanIfConnect = Enable ScanIfConnect = Disable 16.8 Data Process - Wedge/Store, Enter Key & Extend Wedge Only Wedge & Store Always Store Only Save if Sent Save if Not Sent Enable Enter Key Disable Enter Key Enable Extend Key...
Page 286: Data Process - Data Edit
K K DC User Manual ULTIPLE PECIAL ARCODES 16.9 Data Process - Data Edit Start Prefix Enter Start Suffix Enter Finish Prefix / Suffix Enter Cancel Prefix / Suffix Enter Delete Prefix Delete Suffix Display Prefix Display Suffix AIM ID None AIM ID In Prefix AIM ID In Suffix...
Page 287: Data Process - Data Format
K K DC User Manual ULTIPLE PECIAL ARCODES 16.10 Data Process – Data Format Data format = Barcode only Data format = Packet data 16.11 Data Process - Termination Character & Duplicate Check Termination Character = None Termination Character = CR Termination Character = LF Termination Character = CR+LF Termination Character = Tab...
Page 288: Bluetooth
K K DC User Manual ULTIPLE PECIAL ARCODES 16.12 Bluetooth Enable Bluetooth Power Disable Bluetooth Power Connect To Enter Pairing Mode Disconnect Enable Auto Pairing Disable Auto Pairing Bluetooth Profile = SPP Bluetooth Profile = MFi Enable Auto Reconnect Disable Auto Reconnect Display BT Mac Address Display BT FW Version...
Page 289: System
K K DC User Manual ULTIPLE PECIAL ARCODES 16.13 System Memory Status Reset Memory Enable Auto Erase Disable Auto Erase Battery Display Version Serial Number Enable Beep Sound Disable Beep Sound Enable Power On Beep Disable Power On Beep Enable Beep On Connect Disable Beep On Connect...
Page 290 K K DC User Manual ULTIPLE PECIAL ARCODES Enable Beep On Scan Disable Beep On Scan Enable BeepOnMSCard Disable BeepOnMSCard Enable BeepOnICCard Disable BeepOnICCard Enable BeepOnNFCCard Disable BeepOnNFCCard High Beep Volume Low Beep Volume Enable Auto Menu Exit Disable Auto Menu Exit Enable Port Status Disable Port Status Display Format = Time &...
Page 291 K K DC User Manual ULTIPLE PECIAL ARCODES Display Format = Type & Battery Display Format = Memory Status Display Format = Barcode Only Enable Menu Barcode Disable Menu Barcode Factory Default KDC Reset...
Page 292: Sleep Timeout
K K DC User Manual ULTIPLE PECIAL ARCODES 16.14 Sleep Timeout Sleep Timeout = Disable Sleep Timeout = 5sec Sleep Timeout = 10sec Sleep Timeout = 20sec Sleep Timeout = 30sec Sleep Timeout = 1min Sleep Timeout = 2min Sleep Timeout = 5min Sleep Timeout = 10min...
Page 293: Nfc
K K DC User Manual ULTIPLE PECIAL ARCODES 16.15 Enable NFC Power Disable NFC Power 16.16 Enable MSR Power Disable MSR Power No Beep On Error Beep On Error Enable Use Track1 Disable Use Track1 Enable Use Track2 Disable Use Track2 Enable Use Track3 Disable Use Track3...
Page 294 K K DC User Manual ULTIPLE PECIAL ARCODES Enable Null Check Track1 Disable Null Check Track1 Enable Null Check Track2 Disable Null Check Track2 Enable Null Check Track3 Disable Null Check Track3 Enable Attach SS/ES Disable Attach SS/ES MSR Card Type = ISO MSR Card Type = Other 1 MSR Card Type = AAMVA MSR Card Type = JIS 2...
Page 295: Iccr(Ic Card Reader)
K K DC User Manual ULTIPLE PECIAL ARCODES 16.17 ICCR(IC CARD READER) Enable ICCR Power Disable ICCR Power IFD Number Config Number 16.18 Key Management Stored Keys Inject Keys...
Page 296: Multilanguage
K K DC User Manual ULTIPLE PECIAL ARCODES 16.19 Multilanguage English Korean Japanese...
Page 297: Appendix G - Multiple Special Barcodes
KDC configuration; but, this current barcode changes only one configuration. New KDC firmware VersionR_305 introduces a feature to enable the user to make one special barcode to change multiple KDC configurations. 17.1 KDC20/100/250/270L/350L/410/411/415/470L/500L Barcode type Code128 is used to make a single special barcode and its format is as follows: <FNC3><Barcode String>...
Page 298 K K DC User Manual ULTIPLE PECIAL ARCODES <SYN> is a control character 0x16 in hex format. M is an ASCII character 0x4D in hex format. <CR> is a control character 0x0d in hex format. KDC is an ASCII string 0x4B 0x44 0x43 in hex format. <Barcode String>...
Page 299: Appendix H - Product Specification
K K DC User Manual ULTIPLE PECIAL ARCODES 18. Appendix H – Product Specification 18.1 KDC470 Main Processor 120MHz ARM Cortex-M4 Memory 1MB for Firmware, 128KB for RAM, 8MB for User Data Display Keypad 2 Scan Keys and Up/Down Key Battery Li-ion 1130mh Charging...

This manual is also suitable for:

Kdc30 Kdc430 Kdc100 Kdc200 Kdc300 Kdc250 ... Show all

KoamTac KDC20 User Manual

2 Installation

3 Operating Your Kdc

4 Bluetooth -Kdc20/30/200/250/300/270/350/400/500  

5 Synchronization

6 Application Generation

7 Troubleshooting

8 Warranty

9 Contact Information

10 Appendix A - Barcode & Scan Options

11 Appendix B -Faq

12 Appendix C - 1D Special Barcodes

(Kdc20/20D/100/200/250/350L/350D/410/415)

13 Appendix D - 2D Special Barcodes (Kdc30/300/350C/350Wa/420/425/450)

14 Appendix E - Msr Special Barcodes (Kdc415/425Msr)

15 Appendix F - 1D Special Barcodes (500D)

16 Appendix G - 2D Special Barcodes (Kdc500C)

Quick Links

Troubleshooting

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for KoamTac KDC20

Summary of Contents for KoamTac KDC20