KoamTac KDC20 User Manual page 149

KDC User Manual
Synchronization Options

Synchronize KDC Clock
KTSync will set the KDC's date and time with Mac PC date and time when the
KDC is connected to Mac, if this option is enabled.

Burst Synchronization
KTSync will synchronize barcode data from KDC in burst mode. Otherwise,
KTSync would synchronize barcode data one by one. This option is enabled
by default and maynot be disabled.

Synchronization on Connection
KTSync will automatically synchronize barcode data from the KDC when the
KDC is connected, if this option is enabled.

Clear KDC Memory After Synchronization
KTSync clears barcode data stored in the KDC's memory once
synchronization has finished, if this option is enabled.

Append Data to File
KTSync appends synchronized data to existing file specified on destination. If
file does not exist then KTSync creates a new file.
Data Edition

Attach Serial Number
The KTSync will add a KDC serial number to barcode data. This option is
enabled by default and maynot be disabled.

Attach Time Stamp
The KTSync would add timestamp to barcode data. This option is enabled by
default and maynot be disabled.

Attached Barcode Type
The KTSync would add barcode type to barcode data. This option is enabled
by default and maynot be disabled.

Serial Number
S
YNCHRONIZATION
149