Ktsync Menu - KoamTac KDC20 User Manual

KDC User Manual

KTSync Menu

5.1
KTSync was installed on your PC during the initial installation process. Before data
may be uploaded to any host device, KTSync must be launched on the host and
configured to recognize the KDC. The following screen displays when KTSync is
launched:
File Menu
Connect: This option displays the Serial port (COM#) assigned to KDC. You

may also use this option to manually assign the Serial port. The Serial port
assigned to KDC may be found under Windows Device Manager. The port
assignment is used by KTSync for synchronizing data from the KDC to the host.
Synchronize: This option manually tells the KDC to synchronize data with the

host. While data is being synchronized, KTSync menu options are unavailable
Note
Bluetooth: This option is not available on KDC100/KDC500. Users may register

a MAC address to be directly connected by
KDC20/30/200/250/270/300/350/400/470.
Configuration: This option Enables users to set different KDCs with same

settings by exporting and importing settings from one KDC to the other.
Exit: This option ends the KTSync program. You must re-run KTSync before you

may synchronize data on the KDC.
Figure 16 - KTSync
Please do not use your computer during data synchronization.
®
Synchronizer Initial
Screen
S
YNCHRONIZATION
120