Nfc Config Menu – Kdc350N/411N/415N/421N/425N/500 - KoamTac KDC20 User Manual

KDC User
YOUR
NFC Config Menu – KDC350N/411N/415N/421N/425N/500
NFC Power

Turning NFC Power on or off

Options: Enable/Disable
Data Format
Options: Data only/Packet data.(KDC500 doesn't support)

UID Only

Enable or Disable UID Only menu

The KDC only sends UID data to the host device when the KDC is in UID Only
mode.
(KDC500 doesn't support)

UHF Config Menu – KDC450U
UHF Power

Turning UHF Module Power On or Off

Options: Enable/Disable
Power On Time
Specify the power on time duration of UHF module.

Options: 500ms/1sec/1.5sec/2sec/2.5sec/3sec/3.5sec/4sec/4.5sec/5sec
Power Off Time
Specify the power off time duration of UHF module.

Options: 500ms/1sec/1.5sec/2sec/2.5sec/3sec/3.5sec/4sec/4.5sec/5sec
Power Level
Specify the UHF module power level to determine the power strength of antenna. 7
means the most power strength.

Options: 0/1/2/3/4/5/6/7
Data Format
Specify the data format of UHF data when it is transmitted from KDC to Host.

Options: Binary / Hexa Decimal
KDC
92