Gps Config - 350G - KoamTac KDC20 User Manual

KDC User Manual
Connecting To
This option allows user to Inquire to registered
HID Sync
KDC transmits all stored data to the host over HID profile if HID Sync option is enabled.

GPS Config - 350G

Barcode and GPS data format
The KDC350 adds the GPS coordinate after the barcode data, if GPS data is available. The
GPS data starts with "<G|P/S]" and ends with ":". For example, the KDC250 would record
barcode "1234567890"
"208.7,M"as "1234567890<G|P/S]4354.45275,N;07925.81993,W ,208.7,M:" in the barcode
data field.
GPS Menu




66
, GPS coordinate "4354.45275,N;07925.81993,W" and Altitude data
GPS Power: Turning GPS Power on or off
 Users can enable or disable the GPS Power.
 The GPS module consumes extensive battery power. To conserve battery power,
it is strongly recommended to turn off the GPS option when the KDC350 is not
being used for an extended period of time.
 It is also recommended to use the GPS Auto Power Off option in the System
menu. This option automatically turns off the GPS power if a barcode is not
scanned for a period of time.
Power Mode: The user can choose the type power consumption for the GPS function.
 Users can extend the battery life of the KDC350 in Power Save mode.
 Users should use normal mode if accurate GPS data is required.
 The KDC350 will last about 15 hours in normal non-bypass data mode and 18
hours in power save non-bypass data mode.
 The KDC350 will last about 7 hours in normal bypass data mode and 8 hours in
power save bypass data mode.
Bypass Data: Enabled or Disabled
 This option should be disabled if users wish to record the GPS data with a
scanned barcode data.
 The KDC350 will bypass GPS data to the host if the bypass option is enabled.
 The KDC350 becomes a Bluetooth GPS receiver if this bypass data option is
selected.
Acquire Test: Time test to see how long it takes to acquire GPS signal.
O
PERATING YOUR
Bluetooth
devices.
Revision 3.06.A3
Copyright®2014, KOAMTAC, Inc.
KDC