Data Buffer Full - KoamTac KDC20 User Manual

B & S O
ARCODE CAN PTIONS
added to the sum to make it an even multiple of 10. An example would be if the sum of
the products was 37, then the check digit would be 3.
Equation to Determining Potential Number of Stored Barcodes
The number of barcodes that may be stored in the KDC memory depends on the size of
the barcodes.
Example: In case of EAN-13, it takes up 20 bytes. The maximum number of EAN-13
barcodes that may be saved is STORAGE_SIZE/20. For example, in case of 4MB, it may
store maximum 204,800 barcodes and in case of 8MB, it may store maximum 409,600
barcodes.

Data Buffer Full

When the data buffer is full, the KDC displays a message, Buffer Full, ignoring any
command to scan barcodes. The user must reset the data buffer to continue data
collection.
178