KDC User
KDC
YOUR
Basics
3.2
Reading Barcodes
To read a barcode using the KDC, simply point the KDC at a barcode and press the
scan button. Be sure to point the scan engine window at the barcode, not at the user's
face, and make sure to position the light beam on the barcode.
If a barcode has been successfully scanned, the user will hear one short beep and the
LEDs will illuminate green. The scanned barcode data will be displayed on the KDC
Depending on the configuration of
screen, along with the scan time and battery level.
the KDC, other information may also be displayed.
Figure 11 - KDC Display
Figure 12 - Scanning barcodes using KTSync
48