Function Key Transmission In Hid Mode - KoamTac KDC20 User Manual

KDC User Manual
 Disabled  Transmit the original control character.
 Alt+Numpad  Transmit Alt+ ASCII value from Numpad.
 ^+Character  Control characters would be substituted as shown in the
following table.
Replacement to |  Control characters would be substituted as "|".

Control Transmit
Char Chars
0x01 ^A
0x02 ^B
0x03 ^C
0x04 ^D
0x05 ^E
0x06 ^F
0x07 ^G
0x09 ^I

Function Key Transmission in HID mode

The user may send F1 to F12 function keys by scanning special barcodes in HID mode.
KDC500 doesn't support this option.
Disconnect/Reconnect/BT(HID) Toggle
The user may disconnect or reconnect the Bluetooth connection, and toggle the soft
keyboard using side buttons. KDC500 doesn't support this option.
Bluetooth
Profile
SPP
HID iOS
Control Transmit
Char Chars
0x0B ^K
0x0C ^L
0x0E ^N
0x0F ^O
0x10 ^P
0x11 ^Q
0x12 ^R
0x13 ^S
UP Key
Reconnect
Reconnect Soft Keyboard Toggle
if pressing less than
Control Transmit
Char Chars
0x14 ^T
0x15 ^U
0x16 ^V
0x17 ^W
0x18 ^X
0x19 ^Y
0x1A ^Z
0x1C ^\
DOWN Key
(DisconnectBTN
disabled)
Does nothing
3sec
B
LUETOOTH
Control Transmit
Char Chars
0x1D ^]
0x1E ^^
0x1F ^_
DOWN Key
(DisconnectBTN
enabled)
Releases BT
connection
Soft Keyboard Toggle
if pressing less than
3sec,
114