KoamTac KDC20 User Manual page 83

KDC User
YOUR

Suffix - Enables the user to add a suffix to scanned data, which may then be
wedged to the host. The suffix must be defined in the KTSync. The maximum
length for a suffix is 11 characters.
 This Suffix option is different from the Suffix option in KTSync, which
Note
appends the suffix to data during synchronization.
 The user may also define the suffix by scanning characters defined in
Note
Appendix C&D(E&F for KDC500). as shown below in the special barcodes.
20/100/200/250/270L/270D/350L/410/411/415/470L/470D/500L
KDC30/270C/300/350C/420/421/425/450/470C/500C
KDC
Suffix Enter Start
Prefix/Suffix Enter Finish
Suffix Enter Start
Prefix/Suffix Enter Finish
83