Bt Service - Kdc20/30/200/250/300/350/400; Gps Config - 350G - KoamTac KDC Series User Manual

KDC User
YOUR
BT Service – KDC20/30/200/250/300/350/400
Power
Users may choose to turn Bluetooth Power on or off. Select between Enable and Disable.
Pairing Mode
This option Enables user to enter pairing mode by simply selecting this menu.
The KDC enters into pairing mode so that the host

it.
The KDC may exit pairing mode if the user presses the SCAN button or if it fails to

pair with the
Discovering
When users choose this menu, KDC searches for nearby
Connecting To
This option enables the user to inquire to a registered
HID Sync
KDC transmits all stored data to the host over HID profile if HID Sync option is enabled.

GPS Config - 350G

Barcode and GPS data format
The KDC350 adds the GPS coordinate after the barcode data, if GPS data is available. The
GPS data starts with "<G|P/S]" and ends with ":". For example, the KDC250 would record
barcode "1234567890"
"208.7,M"as "1234567890<G|P/S]4354.45275,N;07925.81993,W ,208.7,M:" in the barcode
data field.
GPS Menu
GPS Power: Turning GPS Power on or off

 Users may enable or disable the GPS Power.
 The GPS module consumes extensive battery power. To conserve battery power,
it is strongly recommended to turn off the GPS option when the KDC350 is not
being used for an extended period of time.
 It is also recommended to use the GPS Auto Power Off option in the System
menu. This option automatically turns off the GPS power if a barcode is not
scanned for a period of time.
KDC
Bluetooth
host device within 90 seconds.
, GPS coordinate "4354.45275,N;07925.81993,W" and Altitude data
Bluetooth
device may search for
Bluetooth
devices.
Bluetooth
device.
62