Pwr Off Time; Poweroff Msg; Mac Address; Bt Fw Version - KoamTac KDC200 User Manual

KDC200 User Manual

4.7 PWR OFF Time

The PWR Off Time option works in conjunction with the Auto Power Off option. If Auto Power Off is
Enabled, the KDC powers off Bluetooth when the time duration specified in the PWR Off Time option is met
and the KDC is NOT CONNECTED to the host. The time settings for this option are from one (1) minute to
30 minutes The default is five (5) minutes.

4.8 PowerOFF Msg

KDC can display "Bluetooth Disconnected" message if Power Off Message option is Enabled. "Bluetooth
Disconnected" message would be displayed if PowerOff Msg option is Enabled and KDC is disconnected
with other Bluetooth device.

4.9 MAC Address

User can verify KDC Bluetooth MAC Address.

4.10 BT FW Version

User can verify KDC Bluetooth firmware version in BT FW menu.

4.11 Connect To

This option lets you easily connect KDC to Bluetooth devices previously registered in KTSync under the File
Menu.

4.12 Wakeup Nulls

The KDC sends three leading Null bytes to wake up connected Bluetooth device. This feature can be
disabled if connected Bluetooth device doesn't require additional bytes to wake up.
37