Beep Warning; Pwr Off Time; Poweroff Msg; Mac Address - KoamTac KDC20 User Manual

Hide thumbs Also See for KDC20:
Table of Contents

Advertisement

K K DC User Manual
The default for this option is disabled. It is strongly recommended to keep it enabled to maximize
the operation time of the KDC. If Auto Power Off is Enabled, Bluetooth may be manually powered off
before the specified time in the PWR off time option.
It is recommended to enable 'Auto Power On' option if this option is enabled. User doesn't need to
turn on the Bluetooth power manually with this configuration.

Beep Warning

The KDC beeps to warn user to power off the Bluetooth if this option is enabled with five short
beeps when the following condition meets..
1. Bluetooth power is ON
2. KDC is disconnected
3. Auto Power Off is DISABLED
KDC500 doesn't support this option.

PWR OFF Time

The PWR Off Time option works in conjunction with the Auto Power Off option. If Auto Power Off
is Enabled, the KDC powers off Bluetooth when the duration of time specified in the PWR Off Time
option is met and the KDC is NOT CONNECTED to the host. The time setting for this option is from
one (1) minute to 30 minutes. The default is five (5) minutes. KDC500 doesn't support this option.

PowerOFF Msg

The KDC sends a Bluetooth power off message "BTOFF" to the host when KDC is connected from
host if this option is enabled. KDC500 doesn't support this option.

MAC Address

The user may verify the KDC Bluetooth MAC Address.

FW Version

The user may verify the KDC Bluetooth firmware version in this menu.

Wakeup Nulls

The KDC sends three leading Null bytes to wake up the Bluetooth connected device. This feature may
be disabled if the Bluetooth connected device does not require additional bytes to wake up. KDC500
doesn't support this option.

Autolock Time

The iPhone/iPad/iPod touch loses incoming Bluetooth data while in sleep mode. To prevent data loss,
you may set the KDC Autolock time to the same Autolock time of your iPhone/iPad/iPod touch, to use
the automatic wakeup feature in HID mode. KDC500 doesn't support this option.
B
LUETOOTH

Advertisement

Table of Contents
loading

Table of Contents