ViaSat MEOLink User Manual page 99

MEOLink User Manual
::= { mm1OutboundSiteTrafficStatusEntry
mm1OutboundSiteTrafficEthDroppedPacketRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "PPS"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Outbound Ethernet dropped packet rate (PPS) for the corresponding
site ID."
::= { mm1OutboundSiteTrafficStatusEntry
mm1OutboundSiteTrafficAcmStatus OBJECT-TYPE
SYNTAX INTEGER { down(0), up(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Outbound ACM status (up/down) for the corresponding site ID."
::= { mm1OutboundSiteTrafficStatusEntry
mm1OutboundSiteTrafficSatelliteBitRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Outbound satellite bit rate (kbps) for the corresponding site ID."
::= { mm1OutboundSiteTrafficStatusEntry
mm1OutboundSiteTrafficEsNo OBJECT-TYPE
SYNTAX mm1HundredthdB
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured average Es/No (dB) at the corresponding site ID."
::= { mm1OutboundSiteTrafficStatusEntry
mm1OutboundSiteTrafficAcmModCod OBJECT-TYPE
SYNTAX mm1ModemModCod
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Outbound ACM ModCod for the corresponding site ID."
::= { mm1OutboundSiteTrafficStatusEntry
mm1FreqRefStatus OBJECT-TYPE
SYNTAX INTEGER { internal(0), external(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"10 MHz freq reference in use.
selected and detected and value is in range."
::= { mm1ClockStatus
mm1ExtRefStatus OBJECT-TYPE
SYNTAX INTEGER { present(0), absent(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External reference status."
::= { mm1ClockStatus
Rev 002vx
1141780,
3 }
4 }
5 }
6 }
7 }
8 }
External ref will be used if
1 }
2 }
7‐91