ViaSat MEOLink User Manual page 89

MEOLink User Manual
AUPC will strive to keep utilization below this level."
::= { mm1AupcConfig
mm1AupcAttenuationRange OBJECT-TYPE
SYNTAX mm1HundredthdB (0..2000)
UNITS "dB"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AUPC Attenuation Range (0.0 to 20.0dB, 20dB default)."
::= { mm1AupcConfig
mm1AupcFastUpIncrement OBJECT-TYPE
SYNTAX mm1HundredthdB (10..200)
UNITS "dB"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AUPC increases power (decreases attenuation) this much when algorithm calls
for a fast increase in power (default 1 dB)."
::= { mm1AupcConfig
mm1AupcSlowUpIncrement OBJECT-TYPE
SYNTAX mm1HundredthdB (10..200)
UNITS "dB"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AUPC increases power (decreases attenuation) this much when algorithm calls
for a slow increase in power (default 0.5 dB)."
::= { mm1AupcConfig
mm1AupcDownIncrement OBJECT-TYPE
SYNTAX mm1HundredthdB (10..200)
UNITS "dB"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AUPC decreases power (increases attenuation) this much when algorithm calls
for a decrease in power (default 0.2 dB)."
::= { mm1AupcConfig
mm1IfLoopbackOp OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IF loopback operational state."
::= { mm1TestConfig
mm1IfLoopDemodSelect OBJECT-TYPE
SYNTAX INTEGER { demodA (0), demodB (1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select DemodA or DemodB for IF loopback."
::= { mm1TestConfig
mm1SatLoopbackOp OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Rev 002vx
1141780,
3 }
4 }
5 }
6 }
7 }
1 }
2 }
7‐81