ViaSat MEOLink User Manual page 24

downloading the files to the modem flash are in the following subsections. After
downloading, the custom files may be assigned using the Custom Filter File configuration
instructions found in 3.2.5.2.
2.1.5.1 Loading via FTP
For FTP site setup (no TFTP Server), load files into the MEOLink modem as follows:
2.1.5.2 Loading via TFTP
For TFTP site setup, load files into the MEOLink modem as follows:
2‐16
3. Load your custom filter files from your PC, Laptop or other computer to the
MEOLink modem using FTP follows
a. ftp <modem‐ip‐address>
b. Name: o3b
c. password: o3b
d. ftp> pas
e. ftp> bin
f. ftp> mput customFilter0*
g. mput customFilter020.txt? y
h. mput customFilter025.txt? y
i. mput customFilter035.txt? y
j. quit
4. Complete the load by logging into the MEOLink modem Operator Main Menu, see
section 2.1.2, and:
a. From the User Menu, enter f to copy custom filter files from the FTP
default directory to the internal flash drive; see Figure 16.
Figure 16: Filter Update via FTP (f command)
1. Copy your custom filter files onto the TFTP Server location for the modem,
b. %cp customFilter* /tftpboot/meolink/filter/
MEOLink User Manual
Rev 002vx
1141780,