ViaSat MEOLink User Manual page 85

MEOLink User Manual
mm1TxSymbolRate OBJECT-TYPE
SYNTAX INTEGER (10..180)
UNITS "Msps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmit symbol rate, 10 to 180 Msps, 1 Msps step."
::= { mm1TransmitConfig
mm1TxIfFreq OBJECT-TYPE
SYNTAX mm1TenthKHz (9500000..24500000)
UNITS "kHZ"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmit IF frequency, 950000.0 to 2450000.0 kHz, 0.1 kHz step."
::= { mm1TransmitConfig
mm1TxRollOff OBJECT-TYPE
SYNTAX INTEGER { rolloff035(0), rolloff025(1), rolloff020(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmit DVB-S2 Rolloff:
::= { mm1TransmitConfig
mm1TxCustomFilterFileOp
SYNTAX INTEGER { off(0), on(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmit custom filter file operation.
file based on transmit DVB-S2 roll off selection."
::= { mm1TransmitConfig
mm1TxBucRefOp OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmit block upconverter (BUC) operation."
::= { mm1TransmitConfig
mm1RxDemodSelect OBJECT-TYPE
SYNTAX INTEGER { demodA(0), demodB(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Receive demodulator selected to be active."
::= { mm1ReceiveConfig
mm1RxSymbolRate OBJECT-TYPE
SYNTAX INTEGER (10..180)
UNITS "Msps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Receive symbol rate in Msps (applies to both demods)."
::= { mm1ReceiveConfig
Rev 002vx
1141780,
3 }
4 }
0.35, 0.25, 0.20."
5 }
OBJECT-TYPE
6 }
7 }
1 }
2 }
When on, uses custom filter
7‐77