ViaSat MEOLink User Manual page 146

"Modem satellite handover event."
::= { mm1Notifs 6 }
mm1Nak NOTIFICATION-TYPE
OBJECTS { mm1SeqNo, mm1NotificationInfo, mm1TimeStamp }
STATUS current
DESCRIPTION
"Modem negative acknowledgement."
::= { mm1Notifs 7 }
mm1SeqNo OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Sequence number."
::= { mm1Notifs 8 }
mm1AlarmCode OBJECT-TYPE
SYNTAX INTEGER { calError(0), noFiltFile(1), syncLoss(2), frqRefSw(3),
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Alarm identifier.
calError - Minor
noFiltFile - Minor
syncLoss - Major
frqRefSw - Minor
tempHigh - Major
bufOvfl - Minor
bufUnfl - Minor
fanSpeed - Minor
rldPty - Minor
lvdsPty - Minor
plAlm - Minor
genDiag - Minor
activeDataLinkADown - Major
activeDataLinkBDown - Minor
fanFailed - Minor
noConfigFile - Minor"
::= { mm1Notifs 9 }
mm1FaultCode OBJECT-TYPE
SYNTAX INTEGER { ram(0), flash(1), fpga(2), rf(3), ps(4), temp(5) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Fault code.
and replaced with a spare modem."
::= { mm1Notifs 10 }
mm1NotificationInfo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..80))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Notification information."
::= { mm1Notifs 11 }
7‐138
tempHigh(4), bufOvfl(5), bufUnfl(6), fanSpeed(7),
rldPty(8), lvdsPty(9), plAlm(10), genDiag(11),
activeDataLinkADown(12), activeDataLinkBDown(13),
fanFailed(14), noConfigFile(15) }
Alarm severities are defined as follows:
A fault indicates the modem should be taken out of service
MEOLink User Manual
Rev 002vx
1141780,