Alarm Output - Siemens Pointek CLS 200 Instruction Manual

Measured value, logical level, or error message display
The primary reading field consists of five 7-segment fields plus the arrow sign. It displays
the measured value, logical level, or an error message. The symbols give you further
information:
!
Alarm output switch is closed
"
Alarm output switch is open
#
Communication active. This symbol becomes active for at least 0.3 seconds,
and represents communication currently taking place as acyclic and/or
cyclic data transmission.
Measured value display
The default startup display is the measured value display. It shows the value (in counts
when Sensor has been selected in Mode 13.
sensor uncovered
Logical level display
The logical level display shows the value when the OUT parameter of the Discrete input
function block is selected in Mode 13.
active
communications
symbol
Error message display:
For an example of an Error message, see
1.
The alarm output switch functions according to the setting selected in
type (default: CLOSE)
2.
Counts
See on page 94 for more details.
7ML19985AR02 Pointek CLS 200 (standalone unit) – INSTRUCTION MANUAL Page IIB–41
1
.
1
.
bar graph
sensor uncovered
Error signalling
, on page 56.
sensor covered
sensor covered
on page 43.
Mode 24: Contact
2
)