Siemens Pointek CLS 200 Instruction Manual page 96

Appendix C: shortening the cable
CAUTION
: Possible only with the general purpose configuration; please verify against
product nameplate.
Preparation
Determine the required cable length, and subtract that amount from the actual length, to
find the excess length to cut off.
For example: 10 m (actual length) minus 9 m (required length) = 1 m (excess)
Steps
1. Unscrew the cable gland compression nut to relieve the sealing cone and release
the cable.
7ML19985AR02
actual
length
required
length
cable gland
compression nut
probe sleeve
Pointek CLS 200 – INSTRUCTION MANUAL
excess
length
probe, lower
assembly
Page 99