Process - Siemens Pointek CLS 200 Instruction Manual

For high level alarm (level exceeds normal process level):
• normally mounted into the vessel top, or
• mounted through the tank wall at the detection level
For low level alarm (level drops below normal process level):
• mounted through the tank wall at the detection level
Pointek CLS 200 standard configuration with extensions:
For high or low level alarm:
• designed for top mounting. The probe suspends vertically so that it reaches into
the process at the desired detection level (high or low detection alarm).
High level alarm
7ML19985AR02
normal process
level
Angle
Pointek CLS 200 – INSTRUCTION MANUAL
Low level alarm
normal process
level
Page 115