Siemens Pointek CLS 200 Instruction Manual page 93

Sensor Test (Pointek CLS 200, digital version)
You can initialize a sensor test by activating the reed contact with a bar magnet
outside the housing. For details, see
Pressure versus Temperature Curves
Pointek CLS 200 compact and extended rod versions
Notes:
• Check flange rating.
• Use thermal isolator if process temperature exceeds 85
25
1
-40
process temperature (
1.
A test magnet will be supplied with the instrument.
Page 96
Magnet-activated sensor test
50 100
o
C)
Pointek CLS 200 – INSTRUCTION MANUAL
1
from
, on page 49.
o o
C (185 F).
7ML19985AR02