Digital
Hex
PDM display
display
8E
G_142
Good,
Active critical
alarm,
Limit overflow
A4
G_164
Good,
maintenance
required
When simulation is activated, the device can output the simulated status in addition to
those listed above, considering the Failsafe Mode.
7ML19985AR02
Pointek CLS 200 (PROFIBUS PA ) – INSTRUCTION MANUAL Page IIC–89
Cause
The Sensor Value exceeds
the Upper Diagnostic
Alarm Limit
Maintenance interval has
expired
Measure
Check installation and
sensor adjustment.
Maintenance required:
either: electronics
servicing, or sensor
servicing