Light Engine Quick Disconnect (Leqd) - Christie CP2230 Service Manual

5.10.5 Light Engine Quick Disconnect (LEQD)

The LEQD is part of the light engine assembly. It is attached to the
outside of the cardcage an connects to the Backplane. The LVDS and
power are routed to the light engine from the LEQD.
(Estimated Replacement Time: 8 minutes)
1. Remove the front top lid. Refer to
2. Remove the high security lid. Refer to
page 5-6.
3. Loosen the thumbscrew securing the LEQD in place. (Figure 5-38)
4. Release the two black ejector tabs from the side of the board, which
will pull the board out from the connectors.
5. Pull the LEQD out to remove.
6. Disconnect the three LVDS/power harnesses.
CP2230 Service Manual
020-100562-06 Rev. 1 (05-2016)
5.5.1 Front Top Lid, on page 5-6.
5.5.2 High Security Lid, on
Section 5: Parts and Module Replacement
Figure 5-38 Remove LEQD
5-27