Parameter Function
There are two options: 1/2.
Stop bit
Default setup is 1.
Parity
There are five options: none/odd/even/space/mark.
Default setup is none.
5.10.5.5 PTZ
The PTZ interface is shown as in Figure 5- 124 and Figure 5- 125.
Before setup, please check the following connections are right:
PTZ and decoder connection is right. Decoder address setup is right.
Decoder A (B) line connects with DVR A (B) line.
Click Save button after you complete setup, you can go back to the monitor interface to
control speed dome.
Please refer to the following sheet for detailed information.
Parameter Function
Select speed dome connected channel.
Channel
Figure 5- 124
Figure 5- 125
583