Dahua HCVR5104C User Manual page 598

Select a channel group and then click
Modify channel group
Select a channel group and then double click, you can see the following interface. See
Figure 5- 122. You can change the setup and then click OK button.
Adjust channel group sequence.
Click or to change channel sequence.
5.10.5.4 RS232
Note
This function is for some series product only.
The RS232 interface is shown as in Figure 5- 123.
Please refer to the following sheet for detailed information.
Parameter Function
Select the corresponding dome protocol.
Protocol
Default setup is console.
Select the baud rate.
Baud Rate
Default setup is 115200.
Data Bit The value ranges from 5 to 8.
Default setup is 8.
,you can delete it.
Figure 5- 122
Figure 5- 123
582