Dahua HCVR5104C User Manual page 594

Please refer to the following sheet for detailed information.
Parameter Function
There are four options: 1920×1080,1280 × 1024(default),1280 ×
Resolution
720,1024×768. Please note the system needs to reboot to activate
current setup.
Transparency Here is for you to adjust transparency. The value ranges from 128
to 255.
Check the box here, you can view system time and channel
Time
number on the monitor video.
title/channel
title
Check the box; you can optimize the margin of the preview video.
Image
enhance
Check the box here, you can view IVS rule name on the preview
IVS rule
preview
window.

Video matrix

5.10.5.2.2 TV Adjust
Note
This function is for some series product only.
It is to set TV output region. See Figure 5- 117.
5.10.5.2.3 Tour
The tour interface is shown as in Figure 5- 118. Here you can set tour interval, split mode,
motion detect tour and alarm tour mode.
Check the box, select VGA or the HDMI as the video matrix
output. The selected screen(s) only display(s) the channel
video from the video matrix. Refer to chapter 5.10.5.3 Video
matrix for detailed information.
Cancel the box, the VGA and HDMI output the same video.
Figure 5- 117
578