Dahua HCVR5104C User Manual page 331

Step 8 Set camera IP address。
Check DHCP, there is no need to input IP address, subnet mask, and default

gateway. Device automatically allocates the IP address to the camera.
Check Static, and then input IP address, subnet mask, default gateway and

incremental value.
Note
If it is to change several devices IP addresses at the same time, please input

incremental value. Device can add the fourth address of the IP address one
by one to automatically allocate the IP addresses.
If there is IP conflict when changing static IP address, device pops up IP

conflict dialogue box. If batch change IP address, device automatically skips
the conflicted IP and begin the allocation according to the incremental value
Step 9 Click Next button.
Device begins initializing camera. See Figure 4- 27.
Figure 4- 26
315