Dahua HCVR5104C User Manual page 525

Parameter Function
not right.
After getting the remote device channel amount, click Setup to select a
channel.
Remote
channel No.
Click to select one or more remote channel numbers here.
The local channel number you want to add. One channel name has
Channel
corresponding one channel number.
Decode buffer There are three item: realtime,local, fluent.
There are four items: auto/TCP/UDP/MULTICAST(ONVIF device only)

Service type


Step 3 Click Save button.
The newly added device is added to the list at the bottom of the interface.
Note
means connection successful.
5.10.1.1.4 Modify or Delete Device
Click or double click a device in the added list. Device pops up the following

dialogue box. See Figure 5- 29.
Note
Note
The default connection mode is TCP if the connection protocol is
private.
There are three items:TCP/UDP/MULTICAST if the connection protocol
is ONVIF.
There are two items: TCP/UDP if the connection protocol is from the
third-party.
means connection failed.
509