Table of Contents
Advertisement
Steps:
Step 1
From main window->Setup->Network->Sync time right.
Enter sync time interface. See Figure 5- 59.
Step 2
Check the box to enable this function.
Step 3
Click Add button, and then set IP address in the pop-up interface click Save
button.
Refer to the following table to set parameters.
Parameter
IP address
IP segment
IPv4
IPv6
MAC
address
Step 4
Click Save to complete setup.
Step 5
Login the device WEB on the IP host.
From Setup->System->General->Date and time, change device time or click
Sync time with PC. Device pops the corresponding dialogue box.
5.10.2.9 Email
The email interface is shown as in Figure 5- 60.
Figure 5- 59
Function
Input the device IP address you want to add.
Input the start address and end address of the IP segment you
want to add.
The IP address adopts IPv4 mode such as 172.16.5.10.
The
IP
address
aa:aa:aa:aa:aa:aa:aa:aa.
Input the mac address you want to add.
adopts
IPv6
mode
such
as
532
Advertisement
Table of Contents
