Dahua HCVR5104C User Manual page 583

Step 2 Set parameters.
Parameter Function
It is to select working mode when hard disk is full. There are two options:
HDD full
stop recording or rewrite.
Stop: If current HDD is full while there is no idle HDD, then system

stops recording,
Overwrite: If the current HDD is full while there is no idle HDD, then

system overwrites the previous files.
DVR does not overwrite the locked files.
It is to specify record duration. There are two ways for you to set.
Pack
duration
Time length: It is to pack according to time. The value ranges from 1

to 60 minutes. Default value is 60 minutes.
File length: It is to pack according to file length. The default setup is

1024M. The value ranges from 128M to 2048M.
Never: Do not auto delete old files.

Auto
delete old
Customized: input customized period here, system can auto delete

files
corresponding old files
5.10.4.2 Schedule
5.10.4.2.1 Schedule Record
In this interfaces, you can add or remove the schedule record setup. See Figure 5- 101.
There are three record modes: general (auto), motion detect and alarm. There are six
periods in one day.
You can view the current time period setup from the color bar.
Green color stands for the general record/snapshot.

Yellow color stands for the motion detect record/snapshot..

Red color stands for the alarm record/snapshot.

Blue color stands for MD&alarm record/snapshot.

Note
567