Dahua HCVR5104C User Manual page 457

record video.
Note
If current channel is not recording, current setup gets activated when the channel

begin recording the next time.
If current channel is recording now, current setup will get activated right away, the

current file will be packet and form a file, then system begins recording as you have
just set.
After all the setups please click save button. .
Playback or search in the redundant disk.
There are two ways for you to playback or search in the redundant disk.
Set redundant disk(s) as read-only disk or read-write disk (Main

menu->Setting->Storage->HDD Manager)). System needs to reboot to get setup
activated. Now you can search or playback file in redundant disk.
Dismantle the disk and play it in another PC.

4.9.4.1.2 Snapshot
4.9.4.1.2.1 Schedule Snapshot
On the preview interface, right click mouse and then select Manual->Record, or in the

main menu, from Setting->Storage->Record, check the box to enable snapshot
function of corresponding channels. See Figure 4- 176.
In main menu, from Setting->Camera->Encode->Snapshot interface, here you can

input snapshot mode as regular, size, quality and frequency. See Figure 4- 177.
In main menu, from Setting->Camera->Encode->Schedule interface, please enable

snapshot function. See interface on the right of Figure 4- 178.
Please refer to the following figure for detailed information.
Figure 4- 176
441