Table of Contents
Advertisement
The interface is shown as in Figure 5- 105. Here you can see HDD information. You can
also operate the read-only, read-write, redundancy (if there are more than on HDD) and
format operation.
5.10.4.4 FTP
It is to backup record file or image to the FTP to storage or view.
Before the operation, please download or purchase the FTP service tool and install on the
PC.
Note
For the FTP user, please set FTP folder write right, otherwise system cannot upload the
image.
Step 1
From main window->Setup->Storage->FTP.
Enter FTP interface. See Figure 5- 106.
Step 2
Check the box to enable FTP function.
Step 3
Set parameters.
Parameter
Host IP
Port
Figure 5- 105
Figure 5- 106
Function
The host IP you have installed the FTP server.
The default setup is 21.
570
Advertisement
Table of Contents
