Dahua HCVR5104C User Manual page 343

Hdcvi standalone dvr. hcvr5104c series; hcvr51xxc-v2 series; hcvr7104c-v2 series; hcvr410xc-s2 series; hcvr510xc-s2 series; hcvr7104c-s2 series; hcvr2108c-s2 series; hcvr410xc-s3 series; hcvr510xc-s3 series; hcvr7104c-s3 series; hcvr51xxh serie
Hide thumbs Also See for HCVR5104C:
Table of Contents

Advertisement

Note
You need to have proper rights to implement the following operations. Please
make sure the HDDs have been properly installed.
After the system booted up, it is in default 24-hour regular mode. You can set record
type and time in schedule interface.
Please note you need to go to main menu->Setting->System->General->Holiday to set
holiday date first, otherwise, there is no holiday setup item.
4.1.4.7.1 Record
Step 1
Click Next button, enter Schedule interface. See Figure 4- 43.
Step 2
Set parameters.
Channel: Please select the channel number first. You can select "all" if you want to
set for the whole channels.
: Sync connection icon. Select icon
can be edited together. Now the icon is shown as
: Click it to delete a record type from one period.
Record Type: Please check the box to select corresponding record type. There are
five types: Regular/MD (motion detect)/Alarm/MD&Alarm/intelligent.
Week day: There are eight options: ranges from Saturday to Sunday and all.
Holiday: It is to set holiday setup. Please note you need to go to the General interface
(Main Menu->Setting->System->General) to add holiday first. Otherwise you cannot
see this item.
Pre-record: System can pre-record the video before the event occurs into the file. The
value ranges from 1 to 30 seconds depending on the bit stream.
Redundancy: System supports redundancy backup function.
Redundancy button to activate this function. Please note, before enable this function,
please set at least one HDD as redundant. (Main menu->Setting->Storage->HDD
Manager). Please note this function is null if there is only one HDD.
Period setup: Click button
shown as in Figure 4- 44.There are five record types: regular, motion detection (MD),
Alarm, MD & alarm and intelligent.
Please following the steps listed below to draw the period manually.
Select a channel you want to set. See Figure 4- 40.
Set record type. See Figure 4- 41.
of several dates, all checked items
after one date or a holiday, you can see an interface
Figure 4- 40
.
You can highlight
327

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hcvr5108c-v2Hcvr7104c-v2Hcvr4108c-s2Hcvr5104c-v2Hcvr5104c-s2Hcvr4104c-s2 ... Show all

Table of Contents