Dahua HCVR5104C User Manual page 479

Move down: Click it to move current selected channel down.

Default: Click it to restore default setup.

Tips:
Use mouse or Shift button to switch

means the tour funciton is enabled and
On the navigation bar, click

4.9.5.2.4 Zero-channel Encoding
Click zero-channel encoding button, you can go to the following interface. See Figure
4- 204. Here you can enable and set zero-channel encoding function so that you can view
several video sources at one channel.
Enable: This function is disabled by default. Check the box here to enable this

function so that you can control the zero-channel encoding function at the WEB.
Compression: System default setup is H.264. You can set according to device

capability.
Resolution: The resolution value may vary due to different device capabilities. Please

select from the dropdown list.
Frame rate: The frame rate value may vary due to different device capabilities.

Please select from the dropdown list.
and button to enable /disable tour.
meas tour funciton is disabled.
or to enable/disable tour function.
Figure 4- 203
463