Setup - Dahua HCVR5104C User Manual

Please refer to the following contents for LAN and WAN login difference.
1) In the WAN mode, system opens the main stream of the first channel to monitor by
default. The open/close button on the left pane is null.
2) You can select different channels and different monitor modes at the bottom of the
interface.
Important
The window display mode and the channel number are by default. For example, for
the 16-channel, the max window split mode is 16.
3) Multiple-channel monitor, system adopts extra stream to monitor by default. Double
click one channel, system switches to single channel and system uses main stream to
monitor. You can view there are two icons at the left top corner of the channel number for
you reference. M stands for main stream. S stands for sub stream (extra stream).
4) If you login via the WAN mode, system does not support alarm activation to open the
video function in the Alarm setup interface.
Note
For multiple-channel monitor mode, system adopts extra stream to monitor by default.

You cannot modify manually. All channels are trying to synchronize. Please note the
synchronization effect still depends on your network environments.
For bandwidth consideration, system cannot support monitor and playback at the

same time. System auto closes monitor or playback interface when you are searching
setup in the configuration interface. It is to enhance search speed.

5.10Setup

Here is to introduce DVR basic setups and system configurations.
Figure 5- 21
503