Dahua HCVR5104C User Manual page 478

4.9.5.2.2 TV Adjust
Note
This function is for some series only.
Here is for you to adjust TV output setup. See Figure 4- 202.
Please drag slide bar to adjust each item.
Click Apply or Save to complete setup.
4.9.5.2.3 Tour
Here you can activate tour function. Click Setup button, you can see an interface shown
as in Figure 4- 203
Enable tour: Highlight box here to enable this function.

Interval: System supports 1/8/-window tour. Input proper interval value here. The

value ranges from 5-120 seconds. It is for schedule tour/alarm/motion detect tour.
Split: You can select window split mode from the dropdown list.

Channel group: It is to display all channel groups on current split mode. You can edit

and delete a channel group here. Double click an item in the list; you can edit its
channel group setup. Right now system max supports 32.
Add: Under specified window split mode, click it to add channel group.

Delete: Click it to remove selected channel group.

Move up: Click it to move current selected channel up.

Figure 4- 202
462