Page 1
HDCVR HDCVI Series DVR User’s Manual Version 1.0.0...
Page 2
HDCVR Welcome Thank you for purchasing our HDCVI DVR! This user’s manual is designed to be a reference tool for the installation and operation of your system. Here you can find information about this series DVR features and functions, as well as a detailed menu tree.
HDCVR Important Safeguards and Warnings 1.Electrical safety All installation and operation here should conform to your local electrical safety codes. The product must be grounded to reduce the risk of electric shock. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation.
HDCVR 1. FEATURES AND SPECIFICATIONS Overview This series product is an excellent digital monitor product designed for security field. It adopts embedded Linux OS to maintain reliable operation. It is easy to use and can realize surveillance function after some simple setups.
Page 7
HDCVR Support various playback modes: slow play, fast play, backward play and frame by frame play. Support time title overlay so that you can view event accurate occurred time Support specified zone enlargement. Network operation Support network remote real-time monitor, remote record search and remote PTZ control. ...
HDCVR 2. Overview and Controls 2.1 HDD Installation This series DVR has only one SATA HDD. Please use HDD of 7200rpm or higher. You can refer to the User’s Manual for recommended HDD brand. Please follow the instructions below to install hard disk. 3.
HDCVR Front Panel 2.2.1 Figure2- 1 Please refer to the following sheet for front panel button information. Icon Name Function Power button, press this button for three seconds to boot up or Power button shut down DVR. Activate current control, modify setup, and then move up and ...
HDCVR Network Network error occurs or there is no network connection, the abnormal light becomes red to alert you. indication light HDD error occurs or HDD capacity is below specified threshold abnormal value, the light becomes red to alert you. indication light It is to receive the signal from the remote control.
HDCVR Figure2- 4 CVR Please refer to the following sheet for detailed information. Name Name Name Video input Audio output Audio input Video VGA output HDMI port USB port Network port RS-485 input port Power socket On/Off button GND port 2.4 Connection Sample 2.4.1 Please note the following contents are based on our 1U 720P series product.
HDCVR Figure 2- 4 Connecting Audio Input & Output, Bidirectional Audio 2.5.1 Audio Input These series products audio input port adopt BNC port. Due to high impedance of audio input, please use active sound pick-up. Audio transmission is similar to video transmission. Try to avoid interference, dry joint, loose contact andit shall be away from high tension current.
HDCVR Using more sound-absorbing materials in decoration can reduce voice echo and improve acousticsEnvironment. Adjust the layout to reduce happening of the squeaking. RS485 When the DVR receives a camera control command, it transmits that command up the coaxial cable to the PTZ device.
HDCVR 3. Overview of Navigation and Controls 3.1 Boot up and Shutdown 3.1.1 Boot up and Shutdown Boot up Before the boot up, please make sure: The rated input voltage matches the device power on-off button. Please make sure the power wireconnection is OK.
HDCVR Note: Before replacement, please save the system setup, otherwise, you may lose the data completely! 3.1.2 Startup Wizard After device successfully booted up, it goes to startup wizard. Click Cancel/Next button, you can see system goes to login interface. Tips Check the box Startup button here, system goes to startup wizard again when it boots up the next time.
HDCVR For security reason, please modify password after you first login. Within 30 minutes, three times login failure will result in system alarm and five times login failure willresult in account lock! Right-Click Menu On the preview interface, right click mouse, you can view menu interface shown as in Figure 3-3. Tips After you go to the corresponding interface, right click mouse to go back to the upper-level。...
HDCVR In the preview desktop, system can playback previous 5-60 minutes record of current channel. Please go to the Main Menu->Setting->->System->General to set real-time playback time. Support drag and play function. You can use your mouse to select any playback start time. ...
HDCVR Support play, pause, and exit and drag function. During the preview playback process, you can not see the channel title and record status of current channel. It will display the channel title and the record status once you exit the preview playback. During the preview playback, you can not switch the displayed channel or change current ...
HDCVR remote control). Click Pan/Tilt/Zoom, the interface is shown as below. Here you can set the following items: Step: value ranges from 1 to 8.Zoom.Focus .Iris Figure 3- 6 PTZ set Here you can control PTZ direction, speed, zoom, focus, iris, preset, tour, scan, pattern aux function, light and wiper, rotation and etc Speed is to control PTZ movement speed.
Page 20
HDCVR Figure 3- 7 , you can go to the following interface to set preset, tour, pattern, and scan Click Figure 3- 8 Preset Setup click preset button and use eight direction arrows to adjust camera to the proper position.. Click Set button and then input preset number.
HDCVR Figure Color Here you can set hue, brightness, contrast, saturation, gain, white level, color mode and etc 。 Figure4- 1 Please refer to the following sheet for detailed information. Item Note Period There are two periods in one day. You can set different sharpness, brightness, and contrast setup for different periods.
HDCVR Playback Displaywi Searchtype Channelselection Playback Calendar ndow control Smartsearc Recordtype Time bar Clip Time bar unit Figure 3- 9 Displaywindow Here is to display the searched picture or file. Support 1/4/8-window playback. Searchtype Here you can select to search the picture or the recorded file ”。...
HDCVR Record search You can select to play from the read-write HDD, from peripheral device or from redundancy HDD Important Redundancy HDD does not support picture backup function, but it supports picture playback function. You can select to play from redundancy HDD if there are pictures on the redundancy HDD.
HDCVR ► Slow play In playback mode, click it to realize various slow play modes such as slow play 1, slow play 2, and etc. Fast forward In playback mode, click to realize various fast play modes such as fast play 1,fast play 2 and etc.
Page 25
HDCVR Figure 3- 11 Clip 1, Please play the file you want to edit and then click this button when you want to edit. You can see the corresponding slide bars in the time bar of the corresponding channel. You can adjust the slide bar or input the accurate time to set the file end time.
Page 26
HDCVR Double click a filename to playback Note After you searched files, system implement accurate playback once you click Play for the firsttime. System does not support accurate playback for picture System supports synchronization playback and non-synchronous playback. The synchronization playback supports all channels and non-synchronous playback only supports accurately playback of current select channel.
HDCVR The time bar zooms in the period of the current playback time when you areplaying the file. Main Menu Main Menu 3.3.1 The main menu interface is shown as below 。 Figure 3- 16 Main Second menu Schedule Play back Record Record Backup...
HDCVR Main Second menu Auto Maintain ATM/POS Default Digital HDD Info Info Version NETWORK Logout 3.3.2 Record Record Note: You need to have proper rights to implement the following operations. Please make sure the HDDshave been properly installed. After the system booted up, it is in default 24-hour regular mode. You can set record type and time inschedule interface.
Page 29
HDCVR Regular/MD (motion detect)/Alarm/MD&Alarm. Week day: There are eight options: ranges from Saturday to Sunday and all. Holiday: It is to set holiday setup. Please note you need to go to the General interface (Main Menu ->System->General) to add holiday first. Otherwise you can not see this item. ...
Page 30
HDCVR Figure 3- 19 When the system completes backup, you can see a dialogue box prompting successful backup File format: Click the file format; you can see there are two options: DAV/ASF. The file name format usually is: Channel number+Record type+Time. In the file name, the YDM format is Y+M+D+H+M+S.
Page 31
HDCVR Event type: From the dropdown list you can select motion detection type. Channel: Select a channel from the dropdown list to set motion detect function. Enable: Check the box here to enable motion detect function. Region: Click select button, the interface is shown as in Figure 3-25.
Page 32
HDCVR tampering. There are two ways for you to set periods. Please note system onlysupports 6 periods in one day Figure 3- 21 There are four record types: regular, motion detection (MD), Alarm, MD & alarm. Alarm output: when an alarm occurs, system enables peripheral alarm devices. ...
Page 33
HDCVR may not be the same, you can left click mouse and then drag it to set a region for motion detection. Click Fn toswitch between arm/withdraw motion detection. After setting, click enter button to exitMotion detect here only has relationship with the sensitivity and region setup. It has no relationshipwith other setups. Figure 3- 22 Figure 3- 23 Video Loss...
Page 34
HDCVR Figure 3- 24 Select video loss from the type list. You can see the interface is shown This function allows you to be informed when video loss phenomenon occurred. You canenable alarm output channel and then enable show essage function.
Page 36
HDCVR General Figure 3- 26 Device ID: Please input a corresponding device name here. Device No: Here you can set device number. Language: System supports various languages: Chinese (simplified), Chinese (Traditional), English,Italian, Japanese, French, Spanish (All languages listed here are optional. Slight difference may befound in various series.) ...
Page 37
HDCVR Date separator: There are three denotations to separate date: dot, beeline and solidus. DST: Here you can set DST time and date. Here you can set start time and end time by settingcorresponding week setup or by setting corresponding date setup. ...
Page 38
HDCVR Figure 3- 29 Channel: Select the channel you want. Type: Please select from the dropdown list. There are three options: regular/motion detect/alarm. You can set the various encode parameters for different record typesCompression: System supports H.264 and MJPEG. ...
Page 39
HDCVR channel video, system max supports 4 zones in one channel. Preview/monitor: privacy mask has two types. Preview and Monitor. Preview means the privacymask zone can not be viewed by user when system is in preview status. Monitor means the privacymask zone can not be view by the user when system is in monitor status.
Page 40
HDCVR Figure 3- 32 Trigger Snapshot Please follow the steps listed below to enable the activation snapshot function. After you enabledthis function, system can snapshot when the corresponding alarm occurred In main menu, from Menu->Record->Record set, here you can input snapshotmode as regular, size, quality and frequency Figure 3- 33 In main menu, from Menu->Alarm->Detect, please enable snapshot function for specified channels...
Page 41
HDCVR Figure 3- 34 Image FTP In the main menu, from Setting->Network->FTP, you can set FTP server information. Please enableFTP function and then click save button Figure 3- 35 - 41 -...
Page 42
HDCVR Network Figure 3- 36 IP Version: There are two options: IPv4 and IPv6. Right now, system supports these two IP addressformat and you can access via them. MAC address: The host in the LAN can get a unique MAC address. It is for you to access in the LAN. Itis read-only.
HDCVR there is no PPPoE or VPN. It is the default setup of some router, switch or thenetwork adapter. 1492: Recommend value for PPPoE. 1468: Recommend value for DHCP. Preferred DNS server: DNS server IP address. Alternate DNS server: DNS server alternate address. ...
Page 44
HDCVR You can not see these two modes if the Enable button is grey. Type: You can select trusted site and blacklist from the dropdown list. You can view the IP addresson the following column. Start address/end address: Select one type from the dropdown list, you can input IP address in the ...
Page 45
HDCVR Multicast Figure 3- 39 Here you can set a multiple cast group. Please refer to the following sheet for detailed information IP multiple cast group address -224.0.0.0-239.255.255.255 - “ D” address space The higher four-bit of the first byte= ” 1110” ...
Page 46
HDCVR Figure 3- 40 DDNS You need a PC of fixed IP in the internet and there is the DDNS software running in this PC. In otherwords, this PC is a DNS (domain name server). In network DDNS, please select DDNS type and highlight enable item. Them please input your PPPoEname you get from you IPS and server IP (PC with DDNS).
Page 47
HDCVR Private DDNS function shall work with special DDNS server and special Professional Surveillance Software (PSS). Quick DDNS and Client-end Introduction 1) Background Introduction Device IP is not fixed if you use ADSL to login the network. The DDNS function allows you to access theDVR via the registered domain name.
Page 48
HDCVR Figure 3- 42 UPNP on/off:Turn on or off the UPNP function of the device. Status: When the UPNP is offline, it shows as “Unknown”. When the UPNP works it shows“Success”. Router LAN IP: It is the router IP in the LAN. WAN IP: It is the router IP in the WAN.
Page 49
HDCVR Figure 3- 43 Please refer to the following contents for the parameter information Figure 3- 44 Pane 1: Display 3G signal intensity after you enabled 3G function. Pane 2: Display 3G module configuration information after you enabled 3G function. ...
Page 50
HDCVR AUTH: It is the authentication mode. It supports PAP/CHAP. Dial number: Please input 3G network dialup number you got from your ISP. User name: It is the user name for you to login the 3G network. Password: It is the password for you to login the 3G network.
Page 51
HDCVR previewinterface. When the hotspot verification type is WEP, system displays as AUTO since the device can notdetect its encryption type. System does not support verification type WPA and WPA2. The display may become abnormal forthe verification type and encryption type. After device successfully connected to the WIFI, you can view the hotspot name, IP address, subnetmask, default gateway and etc Email...
Page 52
HDCVR Figure 3- 46 You need to download or buy FTP service tool (such as Ser-U FTP SERVER) to establish FTP service.Please install Ser-U FTP SERVER first. From “start” -> “program” -> Serv-U FTP Server -> Serv-UAdministator. Now you can set user password and FTP folder. Please note you need to grant write rightto FTP upload user Figure 3- 47 - 52 -...
Page 53
HDCVR Figure 3- 48 Figure 3- 49 You can use a PC or FTP login tool to test setup is right or not.For example, you can login user ZHY to H140H140H140HTUFTP://10.10.7.7UTH and then test it can modify or delete folder or not. System also supports upload multiple DVRs to one FTP server.
HDCVR Figure3- 1 Figure3- 2 Alarm Centre This interface is reserved for you to develop Figure 3- 50 - 54 -...
Page 55
HDCVR SNMP SNMP is an abbreviation of Simple Network Management Protocol. It provides the basic networkmanagement frame of the network management system. The SNMP widely used in many environments.It is used in many network device, software and system. You can set in the following interface 。...
Page 56
HDCVR Please set proxy server address, port, and sub-device name at the device-end. Please enable the auto register function, the device can auto register to the proxy server. Important Do not input network default port such as TCP port number Figure 3- 52 The proxy server software developed from the SDK.
Page 58
HDCVR Transparency: Here is for you to adjust transparency. The value ranges from 128 to 255. Channel name: Here is for you to modify channel name. System max support 25-digit (The valuemay vary due to different series). Please note all your modification here only applies to DVR localend.
HDCVR 3.3.4 Information Figure 3- 56 HDD Information Here is to list hard disk type, total space, free space, video start time and status. SATA: 1 here means system max supports 1 HDD. ○ means current HDD is normal. X means thereis error. - means there is no HDD.
Page 60
HDCVR Figure 3- 57 Double click one HDD information; you can see the HDD SMART information Here is for you to view current video data stream (KB/s), resolution and etc. Figure 3- 58 - 60 -...
Page 61
HDCVR Here is for you to view system log file. System lists the following informationLog types include system operation, configuration operation, data management, alarm event, recordoperation, account manager, log clear, file operation and etc. It optimized reboot log. There are onlythree types: normal reboot, abnormal reboot and protection reboot.
Page 62
HDCVR Figure 3- 60 Version Here is for you to view some version information such as version number, built date, serial number andetc Figure 3- 61 - 62 -...
HDCVR Network Network Test Figure 3- 62 Network test interface is shown 。 Destination IP: Please input valid IPV4 address or domain name. Test: Click it to test the connection with the destination IP address. The test results can displayaverage delay and packet loss rate and you can also view the network status as OK, bad, noconnection and etc ...
HDCVR Figure 3- 63 Here you can view information of all connected network adapters. The connection status is shown asoffline if connection is disconnected. Click one network adapter, you can view the flow statistics such assend rate and receive rate at the top panel 3.3.5 Advanced You can see HDD Manager,Account,Oline User,Auto Maintain,Text Overlay,Default,Config backup.
HDCVR HDD Manager Here is to list hard disk type, total space, free space, video start time and status. SATA: 1 here means system max supports 1 HDD. ○ means current HDD is normal. X means there is error. - means there is no HDD. If disk is damaged, system shows as “?”. Please remove the broken hard disk before you add a new one.
Page 66
HDCVR Figure 3- 66 Double click ,Set HDD Channel. Figure 3- 67 Account Here is for you to implement account management. Add new user Modify user Add group Modify group Modify password For account management please note: ...
Page 67
HDCVR For group or user management, there are two levels: admin and user. The user name and group name can consist of eight bytes. One name can only be used once. There are four default users: admin/888888/666666 and hidden user “default”. Except user 6666, other users have administrator right.
Page 68
HDCVR Figure3-94 Click add user button in Figure 3-93 , the interface is shown as in Figure 3-94. Please input the user name, password, select the group it belongs to from the dropdown list. Then you can check the corresponding rights for current user. For convenient user management, usually we recommend the general user right is lower than the admin account.
HDCVR Figure4- 2 Click add group button in Figure 4-65 , the interface is shown as below. See Figure 4-.68 Here you can input group name and then input some memo information if necessary. There are total 98 rights such as control panel, shut down, real-time monitor, playback, record, recordfile backup, PTZ, user account, system information view, alarm input/output setup, system setup, logview, clear log, upgrade system, control device and etc.
Page 70
HDCVR Figure 3- 70 ATM/POS The ATM/POS function is for financial areas. It includes Sniffer, information analysis and title overlay function. The Sniffer mode is network. The network type interface is shown as below. Here we take the ATM/POS protocol to continue. There are two types: with or without the protocol according to client’s requirements.
Page 71
HDCVR Destination IP refers to other systems that receive information. Usually you do not need to set source port and target port. There are total four groups IP. The record channel applies to one group (optional) only. Six frame ID groups verification can guarantee information validity and legal. Figure 3- 72 Default Click default icon, system pops up a dialogue box.
Page 72
HDCVR Figure 3- 73 Backup DVR support CD-RW, DVD burner, USB device backup, network download and eSATA. Here weintroduce USB, eSATA backup. You can refer to Chapter 5 Web Operation for network downloadbackup operation 。 Figure 3- 74 Click backup button, you can see an interface is shown as in Figure 4-32. Here is for you to viewdevices - 72 -...
Page 73
HDCVR information. You can view backup device name and its total space and free space. The device includes CD -RW,DVD burner, USB device, flash disk, eSATA backup Select backup device and then set channel, file start time and end time. Click add button, system begins search.
Page 74
HDCVR You have two methods to add IPC,IP search and Manual add ,as Manual add for example. Click Manual add,you will set IPC information as follow .You can select ONFI protocol.Click OK to save the information. Change the IPC Move the mouse onto the channel you want to change.Right click the mouse,select Remot Device,and you will see the setting screen.You can change/add/delete IPC information.
HDCVR 3.3.6 Shut Down select Shut Down, you can go to the following interface.. There are three options: Shutdown/logout/reboot. For the user who does not have the shut down right, please input corresponding password to shut down Figure 3- 75 - 75 -...
HDCVR 4. WEB OPERATION Slightly difference may be found in the interface due to different series. 4.1 Network Connection Before web client operation, please check the following items Network connection is right. DVR and PC network setup is right. Please refer to network setup(main menu->Setting->Network) Use order ping ***.***.***.***(* DVR IP address) to check connection is OK or not.
HDCVR Figure4- 4 4.3 System menu Figure4- 5 4.3.1 Live In section 2, left click the channel name you want to view, you can see the corresponding video incurrent window.On the top left corner, you can view device IP (10.15.6.144), channel number (1), network monitor bit stream (61Kbps) and stream type: M (Main stream)/S (Sub stream).
HDCVR highlighted. You can go to system folder RecordDownload to view the recorded file. 3: Snapshot picture. You can snapshoot important video. All images are memorized in system clientfolder PictureDownload (default). 4: Audio :Turn on or off audio.(It has no relationship with system audio setup ) ...
HDCVR Figure4- 10 4.3.5 Window change Figure4- 11 From left to right, it is to set video quality, video latency, full screen, 1-window, 4-window. 。 4.3.6 PTZ control Before PTZ operation, please make sure you have properly set PTZ protocol There are eight direction keys.
HDCVR 4.3.7 Image Here you can adjust its brightness, contrast, hue and saturation. (Current channel border becomesgreen).Or you can click Reset button to restore system default setup Figure4- 13 - 80 -...
HDCVR Setup 4.4.1 Camera Conditions Here you can view device property information. The setups become valid immediately after you set. See Figure 4-12. Figure 4-12 Please refer to the following sheet for detailed information - 81 -...
HDCVR Parameter Function Channel Please select a channel from the dropdown list. Period It divides one day (24 hours) to two periods. You can set different hue, brightness, and contrast for different periods. It is to adjust monitor video brightness and darkness level. The default value is 50.
Page 83
HDCVR Figure 4-13 Please refer to the following sheet for detailed information. Parameter Function Channel Please select a channel from the dropdown list. Video enable Check the box here to enable extra stream video. This item is enabled by default. Code stream It includes main stream, motion stream and alarm stream.
Page 84
Please select from the dropdown list. There are two Audio source options: Normal/HDCVI. In the normal mode, the audio signal comes from the Audio In. In the HDCVI mode, the audio signal comes from the coaxial cable of the camera.
HDCVR It is to set the image quality. There are six levels. Quality It is to set snapshot frequency. The value ranges from 1s to 7s. Interval Or you can set customized value. The max setup is 3600s/picture. Click it; you can copy current channel setup to other Copy channel(s).
HDCVR and C:\RecordDownload.Please click the Save button to save current setup. Figure 4-16 Channel Name Here you can set channel name. See Figure 4-17 Figure 4-17 4.4.3 Network TCP/IP The TCP/IP interface is shown as in Figure 4-18 Please refer to the following sheet for detailed information. Parameter Function Mode...
Page 87
HDCVR DHCP mode to auto search the IP. If you select the static mode, you need to set the IP/submask/gateway manually. If you select the DHCP mode, you can view the IP/submask/gateway from the DHCP. If you switch from the DHCP mode to the static mode, you need to reset the IP parameters.
Page 88
HDCVR HTTP port The default value is 80. You can input the actual port number if necessary. HTTPS The default value is 443. You can input the actual port number if necessary. RTSP port The default value is 554. WIFI Please note this function is for the device of WIFI module.
Page 89
HDCVR Parameter Function WLAN type Here you can select 3G network type to distinguish the 3G module from different ISP. The types include WCDMA, CDMA1x and etc. APN/Dial No. Here is the important parameter of PPP. Authorization It includes PAP,CHAP,NO_AUTH. Pulse interval It is to set time to end 3G connection after you close extra...
Page 90
HDCVR Figure 4-23 DDNS The DDNS interface is shown as in Figure 4-24. The DDNS is to set to connect the various servers so that you can access the system via the server. Please go to the corresponding service website to apply a domain name and then access the system via the domain.
Page 91
HDCVR 2) Function Introduction The quick DDNS client has the same function as other DDNS client end. It realizes the bonding of the domain name and the IP address. Right now, current DDNS server is for our own devices only. You need to refresh the bonding relationship of the domain and the IP regularly.
Page 92
HDCVR Figure 4-26 Please refer to the following sheet for detailed information. Parameter Function Please check the box here to enable email function. Enable Input server address and then enable this function. SMTP Server Port Default value is 25. You can modify it if necessary. For the server supports the anonymity function.
Page 93
HDCVR emails activated by the abnormity events, which may result in heavy load for the email server. Please check the box here to enable this function. Health mail Parameter Function Please check the box here to enable email function. Enable Input server address and then enable this function.
Page 94
HDCVR UPnP It allows you to establish the mapping relationship between the LAN and the public network. Here you can also add, modify or remove UPnP item. See Figure 4-28. In the Windows OS, From Start->Control Panel->Add or remove programs. Click the “Add/RemoveWindows Components”...
Page 95
HDCVR It is a string. It is a command between the manage Read Community processand the proxy process. It defined the authentication, accesscontrol and the management relationship between one proxyand one group of the managers. Please make sure the deviceand the proxy are the same.The read community will read all the objects the SNMPsupported in the specified name.
HDCVR Auto Register The auto register interface is shown as below. See Figure 4-31. This function allows the device to auto register to the proxy you specified. In this way, you can use the client-end to access the DVR and etc via the proxy. Here the proxy has a switch function. In the network service, device supports the server address of IPv4 or domain.
Page 97
HDCVR Figure4-33 Create Server Certificate If it is your first time to use this function, please follow the steps listed below. In Figure 5-36, click button, input country name, state name and etc. ClickCreate button. See Figure 4-34 Note: Please make sure the IP or domain information is the same as your device IP or domain name. Figure 4-34 You can see the corresponding prompt.
Page 98
HDCVR Figure4-37 Click Install certificate button, you can go to certificate wizard. See Figure 4-38 Figure 4-38 Click Next button to continue. Now you can select a location for the certificate. See Figure 4-39. Figure4-39 Click Next button, you can see the certificate import process is complete. See Figure 4-40. - 98 -...
Page 99
HDCVR Figure 4-40 Click Finish button, you can see system pops up a security warning dialogue box. See Figure 4-41. Figure 4-41 Click Yes button, system pops up the following dialogue box, you can see the certificate download is complete. See Figure 4-42. Figure4-42 View and set HTTPS port From Setup->Network->Connection, you can see the following interface.
HDCVR Port is your HTTPS port. If you are using default HTTPS value 443, you do not need to add port information here. You can input https://xx.xx.xx.xx to access. Now you can see the login interface if your setup is right. 4.4.4 Event Video detect...
Page 101
HDCVR Figure 4-46 Figure 4-47 Please refer to the following sheet for detailed information. Parameter Function You need to check the box to enable motion Enable detection function.Please select a channel from the dropdown list. Motion detection function becomes activated in the specifiedperiods.
Page 102
HDCVR four zones foryou to set. Please select a zone first and then left drag the mouseto select a zone. The corresponding color zone displays differentdetection zone. You can click Fn button to switch between thearm mode and disarm mode. In arm mode, you can click thedirection buttons to move the green rectangle to set the motiondetection zone.
Page 103
HDCVR Figure 4-48 Tampering The tampering interface is shown as in Figure4-49. After analysis video, system can generate a tampering alarm when the detected moving signal reachedthe sensitivity you set here. For detailed setups, please refer to chapter 5.8.3.1.1 motion detect for detailed information. Figure 4-49 Abnormality It includes two types: No Storage, Storage error, HDD no space, net disconnection, IP conflict and MAC...
HDCVR Please refer to the following sheet for detailed information. Parameter Function Event The abnormal events include: No disk, disk error, disk no space, Type netdisconnection, IP conflict and MAC conflict.You can set one or more items here. Less than: You can set the minimum percentage value here (For disk not space only).
Page 105
HDCVR Figure4-61 Figure 4-62 Figure 4-63 Please refer to the following sheet for detailed information. Parameter Function Channel Please select a channel from the dropdown list. Pre-record Please input pre-record time here. The value ranges from 0 to 30. Redundancy Check the box here to enable redundancy function.
HDCVR 4.4.6 Local Storage The local interface is shown as in Figure 4-64. Here you can see HDD information. You can also operate the read-only, read-write, redundancy (if there are more than on HDD) and format operation. Figure 4-64 4.4.7 Record The interface is shown as in Figure 4-65.
HDCVR 4.4.8 Setting General The general interface includes general, date/time and holiday setup. 5.8.5.1.1General The general interface is shown as in Figure 4-66. Figure4-66 Please refer to the following sheet for detailed information. Parameter Function It is to set device name. Device ID Device No.
Page 108
HDCVR Figure4-67 Please refer to the following sheet for detailed information. Parameter Function Here you can select date format from the dropdown list. Date format There are two options: 24-H and 12-H. Time Format The time zone of the device. Time zone It is to set system time.
Page 109
HDCVR Display Display interface includes GUI, TV adjust, Tour and zero-channel encoding. Display Here you can set background color and transparency level. See Figure 4-69. Figure 4-69 Please refer to the following sheet for detailed information. Parameter Function There are four options: Resolution 1920×1080,1280×1024(default),1280×720,1024×768.
Page 110
Control options: Serial/HDCVI. For HDCVI series product, please select mode HDCVI. The control signal is sent to the PTZ via the coaxial cable. For the serial mode, the control signal is sent to the PTZ via the RS485 port. - 110 -...
Page 111
HDCVR Please select protocol as DH-SD1 if you are using HDCVI mode. Protocol Set corresponding dome address. Default value is 1. Please note Address your setup here shall comply with your dome address; otherwise you can not control the speed dome.
Page 112
HDCVR Account Note: For the character in the following user name or the user group name, system max supports 6-digits.The space in the front or at the end of the string is null. The valid string includes: character, number,and underline.
Page 113
HDCVR Figure 4-74 Modify user It is to modify the user property, belonging group, password and rights. See Figure 4-75. Modify password It is to modify the user password. You need to input the old password and then input the new password twice to confirm the new setup.
Page 114
HDCVR Figure 4-76 Modify group Click the modify group button, you can see an interface is shown as in Figure4-77. Here you can modify group information such as remarks and rights. Figure 4-77 Auto maintain The auto maintain interface is shown as in Figure4-78 Here you can select auto reboot and auto delete old files interval from the dropdown list.
Page 115
HDCVR Figure 4-78 Import/Export The interface is shown as in Figure4-79. Figure 4-79 Please refer to the following sheet for detailed information. Parameter Function It is to import the local setup files to the system. Import It is to export the corresponding WEB setup to your local PC. Export Default The default setup interface is shown as in Figure 4-80.
Page 116
HDCVR Figure 4-81 Version The version interface is shown as in Figure 4-82 Here you can view record channel, alarm input/output information, software version, release date and etc. Please note the following information is for reference only. Figure 4-82 Here you can view system log. See Figure 4-83. Figure 4-83 Please refer to the following sheet for log parameter information.
HDCVR You can select one item to view the detailed information. Detailed information Clear You can click this button to delete all displayed log files. Please notesystem does not support clear by type. You can click this button to backup log files to current PC. Backup Online User The online user interface is shown as in Figure 4-84.
Page 118
HDCVR Figure4-86 Select a file you want to play and then click Play button, system can begin playback. You can select to playback in full-screen. Please note for one channel, system can not playback and download at the same time. You can use the playback control bar to implement various operations such as play, pause, stop, slow play, fast play and etc.
HDCVR Load more It is for you to search record or picture. You can select record channel, record type and record time to download. There are two download types. The download by file interface is shown as in Figure 4-86 and the download by time interface is shown as in Figure 4-89.
HDCVR Figure 4-92 Please refer to the following sheet for detailed information. Type Parameter Function Alarm Video loss System alarms when video loss occurs. Type Motion detection System alarms when motion detection alarm occurs. Tampering System alarms when camera is viciously masking. Disk full System alarms when disk is full.
HDCVR Figure4-93 4.6 Un-install Web Control You can use web un-install tool “uninstall web.bat” to un-install web control. Please note, before you un-installation, please close all web pages, otherwise the un-installation might result in error. - 121 -...
HDCVR 5. Professional Surveillance System Besides Web, you can use our Professional Surveillance Software (PSS) to login the device.For detailed information, please refer to PSS user’s manual. - 122 -...
HDCVR 6. FAQ 6.1 FAQ 1.DVR can not boot up properly. There are following possibilities: Input power is not correct. Power connection is not correct. Power connection is not correct. Program upgrade is wrong. HDD malfunction or something wrong with HDD ribbon. Seagate DB35.1,DB35.2,SV35 or Maxtor 17-g has compatibility problem.
Page 124
HDCVR Brightness is 0. Please restore factory default setup. There is no video input signal or it is too weak. Check privacy mask setup or your screen saver. DVR hardware malfunctions. 5. Real-time video color is distorted. There are following possibilities: When using BNC output, NTSC and PAL setup is not correct.
Page 125
HDCVR Setup is not correct. Please enable audio function Corresponding channel has no video input. Playback is not continuous when the screen is blue. 10. Time display is not correct. There are following possibilities: Setup is not correct Battery contact is not correct or voltage is too low. Crystal is broken.
Page 126
HDCVR Client-end is not compatible with DVR program. 14. There is only mosaic no video when preview or playback video file remotely. There are following possibilities: Network fluency is not good. Client-end resources are limit. There is multiple-cast group setup in DVR. This mode can result in mosaic. Usually we do not recommend this mode.\ There is privacy mask or channel protection setup.
Page 127
HDCVR 18. Alarm signal can not been disarmed. There are following possibilities: Alarm setup is not correct. Alarm output has been open manually. Input device error or connection is not correct. Some program versions may have this problem. Please upgrade your system. 19.
HDCVR 26. When I login via HTTPS, a dialogue says the certificate has expired or is not valid yet. Please make sure your PC time is the same as the device time. Daily Maintenance Please use the brush to clean the board, socket connector and the chassis regularly. ...
HDCVR Appendix A HDD Capacity Calculation Calculate total capacity needed by each DVR according to video recording (video recording type andvideo file storage time). Step 1: According to Formula (1) to calculate storage capacity that is the capacity of each channel needed for each hour, unit Mbyte.
HDCVR Appendix B Compatible Backup Device List Compatible USB drive list NOTE: Please upgrade the DVR firmware to latest version to ensure the accuracy of the table below. Ifyou use the USB drive, please confirm the format FAT or FAT32. Manufacturer Model Capacity...
HDCVR Lexar Lexar 256MB Kingston Data Traveler Kingston Data Traveler 16GB Kingston Data Traveler 32GB Aigo L8315 16GB Sandisk 16GB Kingston Data Traveler Locker+ 32GB Netac U228 Compatible SD Card Lis Brand Standard Capacity Card type Transcend SDHC6 16GB Kingston SDHC4 Kingston Kingston...
Page 132
HDCVR Pioneer DVR-217CHG GH22NS30 Compatible SATA HDD List NOTE: Please upgrade the DVR firmware to latest version to ensure the accuracy of the table below. And SATA HDD should be used for the DVR with SATA port. Here we recommend HDD of 500G to 4Tcapacity.
Page 133
HDCVR Seagate Seagate Constellation ST3500514NS 500G SATA Seagate Seagate Constellation ST31000524NS SATA Seagate Seagate Constellation ST32000644NS SATA Seagate Seagate Constellation ST2000NM0011 SATA Seagate Seagate Constellation ST1000NM0011 SATA Seagate Seagate Constellation ST500NM0011 500G SATA Seagate Seagate Constellation ST2000NM0031 SATA Seagate Seagate Constellation ST1000NM0031 SATA Seagate...
Page 134
HDCVR Westem Digital WD Caviar RE16 WD3200YS-01PGB0 320G SATA Westem Digital WD Caviar RE2 WD5000YS-01MPB0 500G SATA Westem Digital WD AV—AVJS WD2500AVJS-63WDA0 500G SATA Westem Digital WD AV—AVJS WD3200AVJS-63WDA0 320G SATA Westem Digital WD AV—AVJS WD5000AVJS-63YJA0 500G SATA Westem Digital WDAV-GP—AVCS WD5000AVCS-63H1B1 500G...
Page 135
HDCVR Maxtor DiamondMax 20 STM3320820AS 320G SATA Maxtor DiamondMax 20 STM3250820AS 250G SATA - 135 -...
APPENDIX C Compatible CD/DVD Device List Manufacture Model Port Type Type Sony DRX-S50U DVD-RW Sony DRX-S70U DVD-RW Sony AW-G170S SATA DVD-RW Samsung TS-H653A SATA DVD-RW Panasonic SW-9588-C SATA DVD-RW Sony DRX-S50U DVD-RW BenQ 5232WI DVD-RW - 136 -...
Specifications CVR S eries 4-ch 8-ch Parameter High-performance industrial embedded micro controller System Main Processor Embedded LINUX System Multiplex operations: Multiple-channel record, multiple-channel Resources playback and network operation simultaneously User-friendly graphical user interface Interface Input USB mouse Devices Input Arabic number, English character, donation and extension Chinese Method (optional)
Page 142
Storage Support channel record quota setup Mode Record and Recording 1 to 120 minutes single record duration (Default setup is 60 Length minutes) playback Playback When hard disk is full, system can overwrite previous video file. Repeat Record Various search engines such as time, type and channel. Search Playback Various fast play, slow play speeds, manual frame by frame...
Page 143
Alarm Control Alarm Input Alarm Output Alarm Relay System 2 USB 2.0 port. Interface Information Network RJ45 10M/100M self-adaptable Ethernet port connection PTZ control port RS485 Support various PTZ control protocols. RS232 System Hard Disk Display HDD current status Information Information Data Data stream statistics for each channel (in wave mode)
Appendix H Toxic or Hazardous Materials or ElementS Toxic or Hazardous Materials or Elements Component Name Cr VI PBDE Sheet ○ ○ ○ ○ ○ ○ Metal(Case) Plastic Parts ○ ○ ○ ○ ○ ○ (Panel) Circuit Board ○ ○ ○...