Hcvr58Xxs-V2/Hcvr48Xxs-S2 Series - Dahua HCVR5104C User Manual

SN Icon
NO1～NO3
C1～C3
4
RS-232
5
6 VGA
7 AUDIO IN
8
A
9
B
10
11 HDMI
12 AUDIO OUT
13

2.2.33 HCVR58XXS-V2/HCVR48XXS-S2 Series

The rear panel is shown as in Figure 2- 80.
Name Note
Alarm output

port 1～3


GND Alarm input ground port.
Power switch Power on/off button.
RS-232 It is for general COM debug to configure IP address
debug COM. or transfer transparent COM data.
VGA video VGA video output port. Output analog video signal.
output Can connect to the monitor to view ananlog video
port output.
Audio input Connect to audio input device such as speaker.
port
Power input
Input 12V/5A DC.
port
RS485_A port. It is the cable A. You can connect to
RS-485
the control devices such as speed dome PTZ.
communicatio
RS485_B.It is the cable B. You can connect to the
n port
control devices such as speed dome PTZ.
Network port 1000M Ethernet port
High High definition audio and video signal output port. It
Definition transmits uncompressed high definition video and
Media multiple-channel data to the HDMI port of the display
Interface device.
Audio output port. It is to output the analog audio
Audio output
signal to the devices such as the sound box.
port
USB2.0 port USB2.0 port. Connect to mouse, USB storage
device, USB burner and etc.
DVR have the same ground.
3 groups of alarm output ports. (Group 1:port
NO1～C1,Group 2:port NO2～C2,Group 3:port
NO3 ～ C3 ） ).Output alarm signal to the alarm
device. Please make sure there is power to the
external alarm device.
NO:Normal open alarm output port.
C:Alarm output public end.
248